Result

 …  2026-10-23 17:12 UTC 2026-10-23 15:17 UTC

BGD Epic (Freestyle) M (2017)

General Information
ManufacturerBGD GmbH
ModelEpic (Freestyle)
Year2017
SizeM
Line chartOpen
Total airtime30h
Line set airtime30h
Tolerance +/- 10mm (Review)

Settings

The deviation of the measured values from the nominal values is between 0 and 23mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

AR1

a1
a2

BR1

b1
b2

CR1

c1
c2
d1
d2

AR2

a3
a4
a5
a6

BR2

b3
b4
b5
b6

CR2

c3
c4
c5
c6
d3
d4

AR3

a7
a8
a9
a10
a11

BR3

b7
b8
b9
b10
b11

CR3

c7
c8
c9
c10
c11

BR4

a12
b12
c12

AR1

a1
a2

BR1

b1
b2

CR1

c1
c2
d1
d2

AR2

a3
a4
a5
a6

BR2

b3
b4
b5
b6

CR2

c3
c4
c5
c6
d3
d4

AR3

a7
a8
a9
a10
a11

BR3

b7
b8
b9
b10
b11

CR3

c7
c8
c9
c10
c11

BR4

a12
b12
c12
Offsets relative to median diff (-7)
AR1
BR1
CR1
AR2
BR2
CR2
AR3
BR3
CR3
BR4
AR1
BR1
CR1
AR2
BR2
CR2
AR3
BR3
CR3
BR4

Left riser

nom:
7190.50
rdg:
diff:

Averages of group AR1

Formula of calculation:

sum(a1,a2) / 2

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
a1
nom:
7207
rdg:
7208
diff:
a2
nom:
7174
rdg:
7179
diff:
nom:
7102.00
rdg:
diff:

Averages of group BR1

Formula of calculation:

sum(b1,b2) / 2

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
b1
nom:
7119
rdg:
7124
diff:
b2
nom:
7085
rdg:
7090
diff:
nom:
7278.75
rdg:
diff:

Averages of group CR1

Formula of calculation:

sum(c1,c2,d1,d2) / 4

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
c1
nom:
7260
rdg:
7251
diff:
c2
nom:
7229
rdg:
7219
diff:
d1
nom:
7330
rdg:
7321
diff:
d2
nom:
7296
rdg:
7291
diff:
nom:
7170.25
rdg:
diff:

Averages of group AR2

Formula of calculation:

sum(a3,a4,a5,a6) / 4

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
a3
nom:
7189
rdg:
7191
diff:
a4
nom:
7154
rdg:
7154
diff:
a5
nom:
7149
rdg:
7144
diff:
a6
nom:
7189
rdg:
7187
diff:
nom:
7095.00
rdg:
diff:

Averages of group BR2

Formula of calculation:

sum(b3,b4,b5,b6) / 4

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
b3
nom:
7108
rdg:
7105
diff:
b4
nom:
7071
rdg:
7069
diff:
b5
nom:
7076
rdg:
7070
diff:
b6
nom:
7125
rdg:
7118
diff:
nom:
7229.33
rdg:
diff:

Averages of group CR2

Formula of calculation:

sum(c3,c4,c5,c6,d3,d4) / 6

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
c3
nom:
7238
rdg:
7220
diff:
c4
nom:
7193
rdg:
7177
diff:
c5
nom:
7191
rdg:
7177
diff:
c6
nom:
7238
rdg:
7226
diff:
 
d3
nom:
7265
rdg:
7250
diff:
d4
nom:
7251
rdg:
7235
diff:
 
nom:
6909.40
rdg:
diff:

Averages of group AR3

Formula of calculation:

sum(a7,a8,a9,a10,a11) / 5

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
a7
nom:
7049
rdg:
7049
diff:
a8
nom:
6991
rdg:
6993
diff:
a9
nom:
6894
rdg:
6890
diff:
a10
nom:
6809
rdg:
6806
diff:
a11
nom:
6804
rdg:
6796
diff:
nom:
6905.20
rdg:
diff:

Averages of group BR3

Formula of calculation:

sum(b7,b8,b9,b10,b11) / 5

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
b7
nom:
7024
rdg:
7018
diff:
b8
nom:
6958
rdg:
6951
diff:
b9
nom:
6880
rdg:
6872
diff:
b10
nom:
6827
rdg:
6819
diff:
b11
nom:
6837
rdg:
6829
diff:
nom:
7047.40
rdg:
diff:

Averages of group CR3

Formula of calculation:

sum(c7,c8,c9,c10,c11) / 5

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
c7
nom:
7163
rdg:
7152
diff:
c8
nom:
7091
rdg:
7080
diff:
c9
nom:
7013
rdg:
7000
diff:
c10
nom:
6982
rdg:
6967
diff:
c11
nom:
6988
rdg:
6965
diff:
nom:
6467.00
rdg:
diff:

Averages of group BR4

Formula of calculation:

sum(a12,b12,c12) / 3

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
a12
nom:
6440
rdg:
6446
diff:
b12
nom:
6439
rdg:
6444
diff:
c12
nom:
6522
rdg:
6525
diff:

Right riser

nom:
7190.50
rdg:
diff:

Averages of group AR1

Formula of calculation:

sum(a1,a2) / 2

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
a1
nom:
7207
rdg:
7205
diff:
a2
nom:
7174
rdg:
7179
diff:
nom:
7102.00
rdg:
diff:

Averages of group BR1

Formula of calculation:

sum(b1,b2) / 2

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
b1
nom:
7119
rdg:
7125
diff:
b2
nom:
7085
rdg:
7091
diff:
nom:
7278.75
rdg:
diff:

Averages of group CR1

Formula of calculation:

sum(c1,c2,d1,d2) / 4

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
c1
nom:
7260
rdg:
7249
diff:
c2
nom:
7229
rdg:
7219
diff:
d1
nom:
7330
rdg:
7321
diff:
d2
nom:
7296
rdg:
7286
diff:
nom:
7170.25
rdg:
diff:

Averages of group AR2

Formula of calculation:

sum(a3,a4,a5,a6) / 4

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
a3
nom:
7189
rdg:
7190
diff:
a4
nom:
7154
rdg:
7153
diff:
a5
nom:
7149
rdg:
7146
diff:
a6
nom:
7189
rdg:
7185
diff:
nom:
7095.00
rdg:
diff:

Averages of group BR2

Formula of calculation:

sum(b3,b4,b5,b6) / 4

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
b3
nom:
7108
rdg:
7102
diff:
b4
nom:
7071
rdg:
7065
diff:
b5
nom:
7076
rdg:
7067
diff:
b6
nom:
7125
rdg:
7114
diff:
nom:
7229.33
rdg:
diff:

Averages of group CR2

Formula of calculation:

sum(c3,c4,c5,c6,d3,d4) / 6

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
c3
nom:
7238
rdg:
7227
diff:
c4
nom:
7193
rdg:
7183
diff:
c5
nom:
7191
rdg:
7180
diff:
c6
nom:
7238
rdg:
7224
diff:
 
d3
nom:
7265
rdg:
7257
diff:
d4
nom:
7251
rdg:
7237
diff:
 
nom:
6909.40
rdg:
diff:

Averages of group AR3

Formula of calculation:

sum(a7,a8,a9,a10,a11) / 5

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
a7
nom:
7049
rdg:
7049
diff:
a8
nom:
6991
rdg:
6986
diff:
a9
nom:
6894
rdg:
6888
diff:
a10
nom:
6809
rdg:
6802
diff:
a11
nom:
6804
rdg:
6797
diff:
nom:
6905.20
rdg:
diff:

Averages of group BR3

Formula of calculation:

sum(b7,b8,b9,b10,b11) / 5

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
b7
nom:
7024
rdg:
7023
diff:
b8
nom:
6958
rdg:
6954
diff:
b9
nom:
6880
rdg:
6871
diff:
b10
nom:
6827
rdg:
6821
diff:
b11
nom:
6837
rdg:
6829
diff:
nom:
7047.40
rdg:
diff:

Averages of group CR3

Formula of calculation:

sum(c7,c8,c9,c10,c11) / 5

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
c7
nom:
7163
rdg:
7158
diff:
c8
nom:
7091
rdg:
7081
diff:
c9
nom:
7013
rdg:
7003
diff:
c10
nom:
6982
rdg:
6969
diff:
c11
nom:
6988
rdg:
6965
diff:
nom:
6467.00
rdg:
diff:

Averages of group BR4

Formula of calculation:

sum(a12,b12,c12) / 3

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

There is not enough data to calculate statistics yet.
a12
nom:
6440
rdg:
6444
diff:
b12
nom:
6439
rdg:
6441
diff:
c12
nom:
6522
rdg:
6525
diff:
 Help
AoI The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.
ref The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:
groups and rows Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points Clicking the white area beneath the suspension point name
nom The nominal length between suspension point and main riser loop.
rdg The actual reading from your measurement device. When measuring, rdg is the input field.
diff The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.
colors Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.
status Color coded dots are shown for manual, imported, laser values
Also take a look at the Manual

Continue trimming procedure

inject html