Result

^{…
2026-02-04 15:50 UTC

2026-02-04 15:44 UTC

2026-02-04 14:41 UTC
…}

Flow XCRacer M (2017)

General Information

Manufacturer	Flow Paragliders
Model	XCRacer
Year	2017
Size	M
Production date	2016-01
Line chart	Open
Total airtime	0h
Line set airtime	0h
Tolerance	+/- 10mm (Review)

Data integrity & access	Contains manual values

Settings

Manufacturer tolerance

Correction value

The deviation of the measured values from the nominal values is between 0 and 43mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

amain

cmain

amain2

cmain2

amain3

a10

a11

a12

a13

c12

c13

CV stabilo

c10

c11

amain

cmain

amain2

cmain2

amain3

a10

a11

a12

a13

c12

c13

CV stabilo

c10

c11

Offsets relative to median diff (22)

amain

cmain

amain2

cmain2

amain3

CV stabilo

amain

cmain

amain2

cmain2

amain3

CV stabilo

Left riser

amain

nom:

7540.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group amain

Formula of calculation:

sum(a1,a2,a3,a4,b1,b2,b3,b4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7638

rdg:

7642

diff:

nom:

7534

rdg:

7540

diff:

nom:

7499

rdg:

7506

diff:

nom:

7550

rdg:

7559

diff:

nom:

7613

rdg:

7618

diff:

nom:

7501

rdg:

7502

diff:

nom:

7464

rdg:

7478

diff:

nom:

7523

rdg:

7529

diff:

cmain

nom:

7546.63

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group cmain

Formula of calculation:

sum(c1,c2,c3,c4,d1,d2,d3,d4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7578

rdg:

7614

diff:

nom:

7484

rdg:

7509

diff:

nom:

7451

rdg:

7470

diff:

nom:

7486

rdg:

7508

diff:

nom:

7670

rdg:

7678

diff:

nom:

7580

rdg:

7587

diff:

nom:

7548

rdg:

7554

diff:

nom:

7576

rdg:

7584

diff:

amain2

nom:

7350.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group amain2

Formula of calculation:

sum(a5,a6,a7,a8,b5,b6,b7,b8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7479

rdg:

7512

diff:

nom:

7349

rdg:

7375

diff:

nom:

7295

rdg:

7327

diff:

nom:

7324

rdg:

7349

diff:

nom:

7458

rdg:

7491

diff:

nom:

7325

rdg:

7353

diff:

nom:

7272

rdg:

7296

diff:

nom:

7304

rdg:

7334

diff:

cmain2

nom:

7376.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group cmain2

Formula of calculation:

sum(c5,c6,c7,c8,d5,d6,d7,d8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7450

rdg:

7482

diff:

nom:

7320

rdg:

7356

diff:

nom:

7269

rdg:

7307

diff:

nom:

7312

rdg:

7347

diff:

nom:

7544

rdg:

7560

diff:

nom:

7402

rdg:

7426

diff:

nom:

7344

rdg:

7373

diff:

nom:

7374

rdg:

7404

diff:

amain3

nom:

7010.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group amain3

Formula of calculation:

sum(a9,a10,a11) / 3

amain3 contains suspension points that are excluded from the average:

a12,a13,c12,c13

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7102

rdg:

7122

diff:

a10

nom:

6991

rdg:

7012

diff:

a11

nom:

6937

rdg:

6955

diff:

a12

nom:

6882

rdg:

6871

diff:

a13

nom:

6853

rdg:

6845

diff:

c12

nom:

6883

rdg:

6874

diff:

c13

nom:

6911

rdg:

6876

diff:

CV stabilo

nom:

7021.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CV stabilo

Formula of calculation:

sum(c9,c10,c11) / 3

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7103

rdg:

7124

diff:

c10

nom:

7001

rdg:

7027

diff:

c11

nom:

6959

rdg:

6977

diff:

Right riser

amain

nom:

7540.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group amain

Formula of calculation:

sum(a1,a2,a3,a4,b1,b2,b3,b4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7638

rdg:

7654

diff:

nom:

7534

rdg:

7552

diff:

nom:

7499

rdg:

7521

diff:

nom:

7550

rdg:

7566

diff:

nom:

7613

rdg:

7633

diff:

nom:

7501

rdg:

7522

diff:

nom:

7464

rdg:

7490

diff:

nom:

7523

rdg:

7539

diff:

cmain

nom:

7546.63

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group cmain

Formula of calculation:

sum(c1,c2,c3,c4,d1,d2,d3,d4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7578

rdg:

7606

diff:

nom:

7484

rdg:

7511

diff:

nom:

7451

rdg:

7479

diff:

nom:

7486

rdg:

7521

diff:

nom:

7670

rdg:

7674

diff:

nom:

7580

rdg:

7583

diff:

nom:

7548

rdg:

7556

diff:

nom:

7576

rdg:

7586

diff:

amain2

nom:

7350.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group amain2

Formula of calculation:

sum(a5,a6,a7,a8,b5,b6,b7,b8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7479

rdg:

7509

diff:

nom:

7349

rdg:

7379

diff:

nom:

7295

rdg:

7326

diff:

nom:

7324

rdg:

7353

diff:

nom:

7458

rdg:

7484

diff:

nom:

7325

rdg:

7354

diff:

nom:

7272

rdg:

7303

diff:

nom:

7304

rdg:

7329

diff:

cmain2

nom:

7376.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group cmain2

Formula of calculation:

sum(c5,c6,c7,c8,d5,d6,d7,d8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7450

rdg:

7493

diff:

nom:

7320

rdg:

7361

diff:

nom:

7269

rdg:

7310

diff:

nom:

7312

rdg:

7354

diff:

nom:

7544

rdg:

7562

diff:

nom:

7402

rdg:

7426

diff:

nom:

7344

rdg:

7370

diff:

nom:

7374

rdg:

7402

diff:

amain3

nom:

7010.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group amain3

Formula of calculation:

sum(a9,a10,a11) / 3

amain3 contains suspension points that are excluded from the average:

a12,a13,c12,c13

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7102

rdg:

7127

diff:

a10

nom:

6991

rdg:

7017

diff:

a11

nom:

6937

rdg:

6958

diff:

a12

nom:

6882

rdg:

6879

diff:

a13

nom:

6853

rdg:

6846

diff:

c12

nom:

6883

rdg:

6875

diff:

c13

nom:

6911

rdg:

6876

diff:

CV stabilo

nom:

7021.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CV stabilo

Formula of calculation:

sum(c9,c10,c11) / 3

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7103

rdg:

7120

diff:

c10

nom:

7001

rdg:

7026

diff:

c11

nom:

6959

rdg:

6979

diff:

Help

AoI

The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.

ref

The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:

groups and rows	Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points	Clicking the white area beneath the suspension point name

nom

The nominal length between suspension point and main riser loop.

rdg

The actual reading from your measurement device. When measuring, rdg is the input field.

diff

The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.

colors

Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.

status

Color coded dots are shown for manual, imported & laser values

Also take a look at the Manual

Continue trimming procedure

inject html