Result

^{2024-12-04 13:18 UTC

2024-12-04 10:51 UTC
…}

Little Cloud Spiruline II 18 (2010)

General Information

Manufacturer	DLCO
Model	Spiruline II
Year	2010
Size	18
Production date	2010-01
Line chart	Open
Total airtime	0h
Line set airtime	0h
Tolerance	+/- 10mm (Review)

Data integrity & access	Contains manual values

Settings

Manufacturer tolerance

Correction value

The deviation of the measured values from the nominal values is between 461 and 480mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

A1

B1

C1

A2

a10

B2

b10

C2

c10

T1

A1

B1

C1

A2

a10

B2

b10

C2

c10

T1

Offsets relative to median diff (471)

Left riser

nom:

5036.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A1

Formula of calculation:

sum(a1,a2,a3,a4,a5,a6) / 6

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

5080

rdg:

5551

diff:

nom:

5000

rdg:

5477

diff:

nom:

5010

rdg:

5487

diff:

nom:

5015

rdg:

5488

diff:

nom:

5020

rdg:

5491

diff:

nom:

5095

rdg:

5566

diff:

nom:

4981.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B1

Formula of calculation:

sum(b1,b2,b3,b4,b5,b6) / 6

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

5025

rdg:

5493

diff:

nom:

4940

rdg:

5410

diff:

nom:

4955

rdg:

5427

diff:

nom:

4960

rdg:

5434

diff:

nom:

4965

rdg:

5432

diff:

nom:

5045

rdg:

5507

diff:

nom:

5105.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group C1

Formula of calculation:

sum(c1,c2,c3,c4,c5,c6,d1,d2,d3,d4) / 10

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

5085

rdg:

5555

diff:

nom:

5000

rdg:

5471

diff:

nom:

5015

rdg:

5483

diff:

nom:

5020

rdg:

5486

diff:

nom:

5030

rdg:

5499

diff:

nom:

5105

rdg:

5567

diff:

nom:

5230

rdg:

5705

diff:

nom:

5170

rdg:

5639

diff:

nom:

5170

rdg:

5633

diff:

nom:

5230

rdg:

5699

diff:

nom:

4892.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A2

Formula of calculation:

sum(a7,a8,a9,a10) / 4

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

4995

rdg:

5473

diff:

nom:

4950

rdg:

5424

diff:

nom:

4840

rdg:

5317

diff:

a10

nom:

4785

rdg:

5260

diff:

nom:

4866.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B2

Formula of calculation:

sum(b7,b8,b9,b10) / 4

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

4955

rdg:

5435

diff:

nom:

4920

rdg:

5399

diff:

nom:

4820

rdg:

5299

diff:

b10

nom:

4770

rdg:

5248

diff:

nom:

4920.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group C2

Formula of calculation:

sum(c7,c8,c9,c10) / 4

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

5015

rdg:

5488

diff:

nom:

4980

rdg:

5454

diff:

nom:

4875

rdg:

5345

diff:

c10

nom:

4810

rdg:

5283

diff:

nom:

4545.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group T1

Formula of calculation:

sum(t1,t2) / 2

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

4550

rdg:

5025

diff:

nom:

4540

rdg:

5012

diff:

Right riser

nom:

5036.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A1

Formula of calculation:

sum(a1,a2,a3,a4,a5,a6) / 6

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

5080

rdg:

5548

diff:

nom:

5000

rdg:

5467

diff:

nom:

5010

rdg:

5477

diff:

nom:

5015

rdg:

5484

diff:

nom:

5020

rdg:

5490

diff:

nom:

5095

rdg:

5562

diff:

nom:

4981.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B1

Formula of calculation:

sum(b1,b2,b3,b4,b5,b6) / 6

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

5025

rdg:

5498

diff:

nom:

4940

rdg:

5417

diff:

nom:

4955

rdg:

5429

diff:

nom:

4960

rdg:

5431

diff:

nom:

4965

rdg:

5435

diff:

nom:

5045

rdg:

5513

diff:

nom:

5105.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group C1

Formula of calculation:

sum(c1,c2,c3,c4,c5,c6,d1,d2,d3,d4) / 10

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

5085

rdg:

5557

diff:

nom:

5000

rdg:

5470

diff:

nom:

5015

rdg:

5485

diff:

nom:

5020

rdg:

5496

diff:

nom:

5030

rdg:

5499

diff:

nom:

5105

rdg:

5569

diff:

nom:

5230

rdg:

5703

diff:

nom:

5170

rdg:

5638

diff:

nom:

5170

rdg:

5636

diff:

nom:

5230

rdg:

5697

diff:

nom:

4892.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A2

Formula of calculation:

sum(a7,a8,a9,a10) / 4

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

4995

rdg:

5460

diff:

nom:

4950

rdg:

5418

diff:

nom:

4840

rdg:

5304

diff:

a10

nom:

4785

rdg:

5246

diff:

nom:

4866.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B2

Formula of calculation:

sum(b7,b8,b9,b10) / 4

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

4955

rdg:

5428

diff:

nom:

4920

rdg:

5390

diff:

nom:

4820

rdg:

5292

diff:

b10

nom:

4770

rdg:

5239

diff:

nom:

4920.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group C2

Formula of calculation:

sum(c7,c8,c9,c10) / 4

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

5015

rdg:

5490

diff:

nom:

4980

rdg:

5448

diff:

nom:

4875

rdg:

5347

diff:

c10

nom:

4810

rdg:

5278

diff:

nom:

4545.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group T1

Formula of calculation:

sum(t1,t2) / 2

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

4550

rdg:

5026

diff:

nom:

4540

rdg:

5020

diff:

Help

AoI

The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.

ref

The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:

groups and rows	Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points	Clicking the white area beneath the suspension point name

nom

The nominal length between suspension point and main riser loop.

rdg

The actual reading from your measurement device. When measuring, rdg is the input field.

diff

The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.

colors

Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.

status

Color coded dots are shown for manual, imported & laser values

Also take a look at the Manual

Continue trimming procedure

inject html