Help

AoI

The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.

ref

The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:

groups and rows	Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points	Clicking the white area beneath the suspension point name

nom

The nominal length between suspension point and main riser loop.

rdg

The actual reading from your measurement device. When measuring, rdg is the input field.

diff

The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.

colors

Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.

status

Color coded dots are shown for manual, imported & laser values

Also take a look at the Manual

Result

^{2026-05-02 14:21 UTC}

Nova Vortex XS (2025)

General Information

Manufacturer	NOVA Vertriebsgesellschaft m.b.H.
Model	Vortex
Year	2025
Size	XS
Production date	2025-02
Line chart	Open
Total airtime	19h
Line set airtime	19h
Tolerance	+/- 10mm (Review)

Data integrity & access	Contains manual values

Settings

Manufacturer tolerance

Correction value

The deviation of the measured values from the nominal values is between 0 and -33mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

A1

AG1

AG2

AG3

AG4

AAG1

AAG2

AAG3

AAG4

B1

BG1

BG2

BG3

BG4

CG1

CG2

CG3

CG4

A2

AG5

AG6

AG7

AG8

AAG5

AAG6

AAG7

AAG8

B2

BG5

BG6

BG7

BG8

CG5

CG6

CG7

CG8

S-A3

AG9

AG10

AG11

AG12

AG13

AG14

SAG1

SAG2

SG1

SBG1

SBG2

SG2

SCG1

SCG2

SG3

B3

BG9

BG10

BG11

BG12

BG13

BG14

A1

AG1

AG2

AG3

AG4

AAG1

AAG2

AAG3

AAG4

B1

BG1

BG2

BG3

BG4

CG1

CG2

CG3

CG4

A2

AG5

AG6

AG7

AG8

AAG5

AAG6

AAG7

AAG8

B2

BG5

BG6

BG7

BG8

CG5

CG6

CG7

CG8

S-A3

AG9

AG10

AG11

AG12

AG13

AG14

SAG1

SAG2

SG1

SBG1

SBG2

SG2

SCG1

SCG2

SG3

B3

BG9

BG10

BG11

BG12

BG13

BG14

Offsets relative to median diff (-16)

S-A3

Left riser

nom:

7094.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A1

Formula of calculation:

sum(AG1,AG2,AG3,AG4,AAG1,AAG2,AAG3,AAG4) / 8

Statistics of "54-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG1

nom:

7144

rdg:

7133

diff:

AG2

nom:

7098

rdg:

7083

diff:

AG3

nom:

7067

rdg:

7053

diff:

AG4

nom:

7094

rdg:

7077

diff:

AAG1

nom:

7132

rdg:

7123

diff:

AAG2

nom:

7085

rdg:

7070

diff:

AAG3

nom:

7054

rdg:

7036

diff:

AAG4

nom:

7084

rdg:

7069

diff:

nom:

7134.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B1

Formula of calculation:

sum(BG1,BG2,BG3,BG4,CG1,CG2,CG3,CG4) / 8

Statistics of "51-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG1

nom:

7094

rdg:

7078

diff:

BG2

nom:

7046

rdg:

7031

diff:

BG3

nom:

7025

rdg:

7013

diff:

BG4

nom:

7057

rdg:

7044

diff:

CG1

nom:

7246

rdg:

7227

diff:

CG2

nom:

7210

rdg:

7190

diff:

CG3

nom:

7190

rdg:

7173

diff:

CG4

nom:

7211

rdg:

7192

diff:

nom:

6978.38

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A2

Formula of calculation:

sum(AG5,AG6,AG7,AG8,AAG5,AAG6,AAG7,AAG8) / 8

Statistics of "54-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG5

nom:

7039

rdg:

7015

diff:

AG6

nom:

6993

rdg:

6968

diff:

AG7

nom:

6942

rdg:

6923

diff:

AG8

nom:

6961

rdg:

6937

diff:

AAG5

nom:

7027

rdg:

7008

diff:

AAG6

nom:

6981

rdg:

6959

diff:

AAG7

nom:

6931

rdg:

6910

diff:

AAG8

nom:

6953

rdg:

6928

diff:

nom:

7015.38

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B2

Formula of calculation:

sum(BG5,BG6,BG7,BG8,CG5,CG6,CG7,CG8) / 8

Statistics of "51-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG5

nom:

6997

rdg:

6981

diff:

BG6

nom:

6942

rdg:

6927

diff:

BG7

nom:

6900

rdg:

6885

diff:

BG8

nom:

6908

rdg:

6891

diff:

CG5

nom:

7149

rdg:

7129

diff:

CG6

nom:

7108

rdg:

7092

diff:

CG7

nom:

7058

rdg:

7038

diff:

CG8

nom:

7061

rdg:

7050

diff:

S-A3

nom:

6701.83

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group S-A3

Formula of calculation:

sum(AG9,AG10,AG11,AG12,AG13,AG14) / 6

S-A3 contains suspension points that are excluded from the average:

SAG1,SAG2,SG1,SBG1,SBG2,SG2,SCG1,SCG2,SG3

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "51-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG9

nom:

6886

rdg:

6870

diff:

AG10

nom:

6817

rdg:

6801

diff:

AG11

nom:

6678

rdg:

6657

diff:

AG12

nom:

6672

rdg:

6655

diff:

AG13

nom:

6578

rdg:

6557

diff:

AG14

nom:

6580

rdg:

6557

diff:

SAG1

nom:

6351

rdg:

6332

diff:

SAG2

nom:

6318

rdg:

6299

diff:

SG1

nom:

6292

rdg:

6272

diff:

SBG1

nom:

6351

rdg:

6331

diff:

SBG2

nom:

6320

rdg:

6304

diff:

SG2

nom:

6307

rdg:

6274

diff:

SCG1

nom:

6380

rdg:

6368

diff:

SCG2

nom:

6348

rdg:

6332

diff:

SG3

nom:

6332

rdg:

6313

diff:

nom:

6672.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B3

Formula of calculation:

sum(BG9,BG10,BG11,BG12,BG13,BG14) / 6

Statistics of "51-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG9

nom:

6805

rdg:

6792

diff:

BG10

nom:

6744

rdg:

6729

diff:

BG11

nom:

6644

rdg:

6628

diff:

BG12

nom:

6652

rdg:

6639

diff:

BG13

nom:

6580

rdg:

6561

diff:

BG14

nom:

6607

rdg:

6585

diff:

Right riser

nom:

7094.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A1

Formula of calculation:

sum(AG1,AG2,AG3,AG4,AAG1,AAG2,AAG3,AAG4) / 8

Statistics of "54-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG1

nom:

7144

rdg:

7134

diff:

AG2

nom:

7098

rdg:

7087

diff:

AG3

nom:

7067

rdg:

7053

diff:

AG4

nom:

7094

rdg:

7078

diff:

AAG1

nom:

7132

rdg:

7122

diff:

AAG2

nom:

7085

rdg:

7074

diff:

AAG3

nom:

7054

rdg:

7040

diff:

AAG4

nom:

7084

rdg:

7067

diff:

nom:

7134.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B1

Formula of calculation:

sum(BG1,BG2,BG3,BG4,CG1,CG2,CG3,CG4) / 8

Statistics of "51-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG1

nom:

7094

rdg:

7080

diff:

BG2

nom:

7046

rdg:

7031

diff:

BG3

nom:

7025

rdg:

7013

diff:

BG4

nom:

7057

rdg:

7044

diff:

CG1

nom:

7246

rdg:

7228

diff:

CG2

nom:

7210

rdg:

7192

diff:

CG3

nom:

7190

rdg:

7172

diff:

CG4

nom:

7211

rdg:

7195

diff:

nom:

6978.38

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A2

Formula of calculation:

sum(AG5,AG6,AG7,AG8,AAG5,AAG6,AAG7,AAG8) / 8

Statistics of "54-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG5

nom:

7039

rdg:

7024

diff:

AG6

nom:

6993

rdg:

6978

diff:

AG7

nom:

6942

rdg:

6922

diff:

AG8

nom:

6961

rdg:

6941

diff:

AAG5

nom:

7027

rdg:

7010

diff:

AAG6

nom:

6981

rdg:

6961

diff:

AAG7

nom:

6931

rdg:

6912

diff:

AAG8

nom:

6953

rdg:

6931

diff:

nom:

7015.38

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B2

Formula of calculation:

sum(BG5,BG6,BG7,BG8,CG5,CG6,CG7,CG8) / 8

Statistics of "51-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG5

nom:

6997

rdg:

6985

diff:

BG6

nom:

6942

rdg:

6930

diff:

BG7

nom:

6900

rdg:

6884

diff:

BG8

nom:

6908

rdg:

6891

diff:

CG5

nom:

7149

rdg:

7132

diff:

CG6

nom:

7108

rdg:

7096

diff:

CG7

nom:

7058

rdg:

7039

diff:

CG8

nom:

7061

rdg:

7047

diff:

S-A3

nom:

6701.83

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group S-A3

Formula of calculation:

sum(AG9,AG10,AG11,AG12,AG13,AG14) / 6

S-A3 contains suspension points that are excluded from the average:

SAG1,SAG2,SG1,SBG1,SBG2,SG2,SCG1,SCG2,SG3

Statistics of "51-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG9

nom:

6886

rdg:

6874

diff:

AG10

nom:

6817

rdg:

6804

diff:

AG11

nom:

6678

rdg:

6661

diff:

AG12

nom:

6672

rdg:

6655

diff:

AG13

nom:

6578

rdg:

6558

diff:

AG14

nom:

6580

rdg:

6559

diff:

SAG1

nom:

6351

rdg:

6333

diff:

SAG2

nom:

6318

rdg:

6300

diff:

SG1

nom:

6292

rdg:

6277

diff:

SBG1

nom:

6351

rdg:

6336

diff:

SBG2

nom:

6320

rdg:

6305

diff:

SG2

nom:

6307

rdg:

6293

diff:

SCG1

nom:

6380

rdg:

6363

diff:

SCG2

nom:

6348

rdg:

6330

diff:

SG3

nom:

6332

rdg:

6310

diff:

nom:

6672.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B3

Formula of calculation:

sum(BG9,BG10,BG11,BG12,BG13,BG14) / 6

Statistics of "51-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG9

nom:

6805

rdg:

6793

diff:

BG10

nom:

6744

rdg:

6734

diff:

BG11

nom:

6644

rdg:

6633

diff:

BG12

nom:

6652

rdg:

6637

diff:

BG13

nom:

6580

rdg:

6565

diff:

BG14

nom:

6607

rdg:

6589

diff:

Continue trimming procedure

inject html