Result

^{2026-07-22 17:20 UTC}

Ozone Buzz Z5 S (2015)

General Information

Manufacturer	Ozone Paragliders LTD
Model	Buzz Z5
Year	2015
Size	S
Production date	2016-03
Line chart	Open
Total airtime	200h
Line set airtime	200h
Tolerance	+/- 10mm (Review)

Data integrity & access	Checksum valid

Settings

Manufacturer tolerance

Correction value

The deviation of the measured values from the nominal values is between -36 and -47mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

AR1

BR1

CR1

AR2

BR2

CR2

AR3

A10

A11

A12

BR3

B10

B11

B12

CR3

C10

C11

C12

D10

D11

D12

CRL4

A13

A14

B13

B14

C14

AR1

BR1

CR1

AR2

BR2

CR2

AR3

A10

A11

A12

BR3

B10

B11

B12

CR3

C10

C11

C12

D10

D11

D12

CRL4

A13

A14

B13

B14

C14

Offsets relative to median diff (-41)

AR1

BR1

CR1

AR2

BR2

CR2

AR3

BR3

CR3

CRL4

AR1

BR1

CR1

AR2

BR2

CR2

AR3

BR3

CR3

CRL4

Left riser

AR1

nom:

6684.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR1

Formula of calculation:

sum(A1,A2,A3,A4) / 4

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6720

rdg:

6677

diff:

nom:

6680

rdg:

6638

diff:

nom:

6661

rdg:

6618

diff:

nom:

6675

rdg:

6635

diff:

BR1

nom:

6600.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6637

rdg:

6596

diff:

nom:

6596

rdg:

6556

diff:

nom:

6578

rdg:

6538

diff:

nom:

6591

rdg:

6554

diff:

CR1

nom:

6709.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CR1

Formula of calculation:

sum(C1,C2,C3,C4,D1,D2,D3,D4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6705

rdg:

6666

diff:

nom:

6661

rdg:

6623

diff:

nom:

6637

rdg:

6597

diff:

nom:

6646

rdg:

6610

diff:

nom:

6803

rdg:

6764

diff:

nom:

6758

rdg:

6718

diff:

nom:

6731

rdg:

6690

diff:

nom:

6738

rdg:

6700

diff:

AR2

nom:

6622.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR2

Formula of calculation:

sum(A5,A6,A7,A8) / 4

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6645

rdg:

6601

diff:

nom:

6621

rdg:

6577

diff:

nom:

6604

rdg:

6557

diff:

nom:

6619

rdg:

6575

diff:

BR2

nom:

6548.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR2

Formula of calculation:

sum(B5,B6,B7,B8) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6568

rdg:

6525

diff:

nom:

6546

rdg:

6502

diff:

nom:

6531

rdg:

6486

diff:

nom:

6547

rdg:

6503

diff:

CR2

nom:

6631.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CR2

Formula of calculation:

sum(C5,C6,C7,C8,D5,D6,D7,D8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6623

rdg:

6579

diff:

nom:

6596

rdg:

6555

diff:

nom:

6573

rdg:

6532

diff:

nom:

6584

rdg:

6543

diff:

nom:

6709

rdg:

6667

diff:

nom:

6675

rdg:

6634

diff:

nom:

6644

rdg:

6603

diff:

nom:

6650

rdg:

6609

diff:

AR3

nom:

6423.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR3

Formula of calculation:

sum(A9,A10,A11,A12) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6507

rdg:

6465

diff:

A10

nom:

6463

rdg:

6423

diff:

A11

nom:

6378

rdg:

6338

diff:

A12

nom:

6344

rdg:

6303

diff:

BR3

nom:

6371.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR3

Formula of calculation:

sum(B9,B10,B11,B12) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6449

rdg:

6404

diff:

B10

nom:

6410

rdg:

6367

diff:

B11

nom:

6329

rdg:

6286

diff:

B12

nom:

6298

rdg:

6256

diff:

CR3

nom:

6413.13

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CR3

Formula of calculation:

sum(C9,C10,C11,C12,D9,D10,D11,D12) / 8

Statistics of "04"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6469

rdg:

6427

diff:

C10

nom:

6427

rdg:

6388

diff:

C11

nom:

6342

rdg:

6303

diff:

C12

nom:

6308

rdg:

6268

diff:

nom:

6532

rdg:

6487

diff:

D10

nom:

6484

rdg:

6439

diff:

D11

nom:

6391

rdg:

6350

diff:

D12

nom:

6352

rdg:

6308

diff:

CRL4

nom:

5982.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CRL4

Formula of calculation:

sum(A13,A14,B13,B14,C14) / 5

Statistics of "04"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A13

nom:

6072

rdg:

6032

diff:

A14

nom:

5863

rdg:

5824

diff:

B13

nom:

6057

rdg:

6019

diff:

B14

nom:

5913

rdg:

5869

diff:

C14

nom:

6005

rdg:

5962

diff:

Right riser

AR1

nom:

6684.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR1

Formula of calculation:

sum(A1,A2,A3,A4) / 4

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6720

rdg:

6680

diff:

nom:

6680

rdg:

6638

diff:

nom:

6661

rdg:

6622

diff:

nom:

6675

rdg:

6636

diff:

BR1

nom:

6600.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6637

rdg:

6594

diff:

nom:

6596

rdg:

6554

diff:

nom:

6578

rdg:

6534

diff:

nom:

6591

rdg:

6549

diff:

CR1

nom:

6709.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CR1

Formula of calculation:

sum(C1,C2,C3,C4,D1,D2,D3,D4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6705

rdg:

6662

diff:

nom:

6661

rdg:

6618

diff:

nom:

6637

rdg:

6595

diff:

nom:

6646

rdg:

6604

diff:

nom:

6803

rdg:

6759

diff:

nom:

6758

rdg:

6712

diff:

nom:

6731

rdg:

6691

diff:

nom:

6738

rdg:

6695

diff:

AR2

nom:

6622.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR2

Formula of calculation:

sum(A5,A6,A7,A8) / 4

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6645

rdg:

6604

diff:

nom:

6621

rdg:

6578

diff:

nom:

6604

rdg:

6562

diff:

nom:

6619

rdg:

6577

diff:

BR2

nom:

6548.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR2

Formula of calculation:

sum(B5,B6,B7,B8) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6568

rdg:

6532

diff:

nom:

6546

rdg:

6509

diff:

nom:

6531

rdg:

6490

diff:

nom:

6547

rdg:

6507

diff:

CR2

nom:

6631.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CR2

Formula of calculation:

sum(C5,C6,C7,C8,D5,D6,D7,D8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6623

rdg:

6584

diff:

nom:

6596

rdg:

6558

diff:

nom:

6573

rdg:

6533

diff:

nom:

6584

rdg:

6543

diff:

nom:

6709

rdg:

6668

diff:

nom:

6675

rdg:

6636

diff:

nom:

6644

rdg:

6607

diff:

nom:

6650

rdg:

6612

diff:

AR3

nom:

6423.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR3

Formula of calculation:

sum(A9,A10,A11,A12) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6507

rdg:

6467

diff:

A10

nom:

6463

rdg:

6423

diff:

A11

nom:

6378

rdg:

6337

diff:

A12

nom:

6344

rdg:

6302

diff:

BR3

nom:

6371.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR3

Formula of calculation:

sum(B9,B10,B11,B12) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6449

rdg:

6406

diff:

B10

nom:

6410

rdg:

6366

diff:

B11

nom:

6329

rdg:

6288

diff:

B12

nom:

6298

rdg:

6258

diff:

CR3

nom:

6413.13

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CR3

Formula of calculation:

sum(C9,C10,C11,C12,D9,D10,D11,D12) / 8

Statistics of "04"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6469

rdg:

6427

diff:

C10

nom:

6427

rdg:

6387

diff:

C11

nom:

6342

rdg:

6305

diff:

C12

nom:

6308

rdg:

6271

diff:

nom:

6532

rdg:

6490

diff:

D10

nom:

6484

rdg:

6440

diff:

D11

nom:

6391

rdg:

6349

diff:

D12

nom:

6352

rdg:

6311

diff:

CRL4

nom:

5982.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CRL4

Formula of calculation:

sum(A13,A14,B13,B14,C14) / 5

Statistics of "04"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A13

nom:

6072

rdg:

6030

diff:

A14

nom:

5863

rdg:

5821

diff:

B13

nom:

6057

rdg:

6016

diff:

B14

nom:

5913

rdg:

5868

diff:

C14

nom:

6005

rdg:

5962

diff:

Help

AoI

The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.

ref

The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:

groups and rows	Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points	Clicking the white area beneath the suspension point name

nom

The nominal length between suspension point and main riser loop.

rdg

The actual reading from your measurement device. When measuring, rdg is the input field.

diff

The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.

colors

Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.

status

Color coded dots are shown for manual, imported & laser values

Also take a look at the Manual

Continue trimming procedure

inject html