Result

 …  2025-03-24 11:25 UTC 2024-09-21 19:41 UTC 2024-07-10 09:37 UTC  … 

Swing Libra RS L (2023)

General Information
ManufacturerSWING FlugsportgerÃĪte GmbH
ModelLibra RS
Year2023
SizeL
Production date2023-06
Line chartOpen
Total airtime10h
Line set airtime10h
Tolerance +/- 10mm (Review)
Data integrity & access
  • Checksum valid

Settings

The deviation of the measured values from the nominal values is between 0 and 27mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.
Wing as seen from above in flight

AM1

aa1
aa2
aa3
aa4
ab1
ab2
ab3
ab4

BM1

bb1
bb2
bb3
bb4
bc1
bc2
bc3
bc4

AM2

aa5
aa6
aa7
aa8
ab5
ab6
ab7
ab8

BM2

bb5
bb6
bb7
bb8
bc5
bc6
bc7
bc8

AM3

aa9
aa10
af11
af12
af13
af14
ab9
ab10
aa11
aa12
aa13
aa14

BM3

bb9
bb10
bb11
bb12
bb13
bb14
bc9
bc10
bc11
bc12
bc13
bc14

ST1

aa15
aa16
aa17
bb15
bb16
bb17

AM1

aa1
aa2
aa3
aa4
ab1
ab2
ab3
ab4

BM1

bb1
bb2
bb3
bb4
bc1
bc2
bc3
bc4

AM2

aa5
aa6
aa7
aa8
ab5
ab6
ab7
ab8

BM2

bb5
bb6
bb7
bb8
bc5
bc6
bc7
bc8

AM3

aa9
aa10
af11
af12
af13
af14
ab9
ab10
aa11
aa12
aa13
aa14

BM3

bb9
bb10
bb11
bb12
bb13
bb14
bc9
bc10
bc11
bc12
bc13
bc14

ST1

aa15
aa16
aa17
bb15
bb16
bb17
Offsets relative to median diff (13)
AM1
BM1
AM2
BM2
AM3
BM3
ST1
AM1
BM1
AM2
BM2
AM3
BM3
ST1

Left riser

nom:
8118.13
rdg:
diff:

Averages of group AM1

Formula of calculation:

sum(aa1,aa2,aa3,aa4,ab1,ab2,ab3,ab4) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
aa1
nom:
8175
rdg:
8186
diff:
aa2
nom:
8130
rdg:
8138
diff:
aa3
nom:
8100
rdg:
8113
diff:
aa4
nom:
8130
rdg:
8140
diff:
ab1
nom:
8145
rdg:
8153
diff:
ab2
nom:
8095
rdg:
8107
diff:
ab3
nom:
8065
rdg:
8077
diff:
ab4
nom:
8105
rdg:
8112
diff:
nom:
8119.38
rdg:
diff:

Averages of group BM1

Formula of calculation:

sum(bb1,bb2,bb3,bb4,bc1,bc2,bc3,bc4) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
bb1
nom:
8105
rdg:
8114
diff:
bb2
nom:
8055
rdg:
8066
diff:
bb3
nom:
8035
rdg:
8043
diff:
bb4
nom:
8065
rdg:
8074
diff:
bc1
nom:
8210
rdg:
8218
diff:
bc2
nom:
8170
rdg:
8183
diff:
bc3
nom:
8145
rdg:
8151
diff:
bc4
nom:
8170
rdg:
8177
diff:
nom:
7996.88
rdg:
diff:

Averages of group AM2

Formula of calculation:

sum(aa5,aa6,aa7,aa8,ab5,ab6,ab7,ab8) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
aa5
nom:
8070
rdg:
8076
diff:
aa6
nom:
8020
rdg:
8030
diff:
aa7
nom:
7965
rdg:
7976
diff:
aa8
nom:
7985
rdg:
7995
diff:
ab5
nom:
8040
rdg:
8047
diff:
ab6
nom:
7995
rdg:
8007
diff:
ab7
nom:
7940
rdg:
7956
diff:
ab8
nom:
7960
rdg:
7971
diff:
nom:
8009.38
rdg:
diff:

Averages of group BM2

Formula of calculation:

sum(bb5,bb6,bb7,bb8,bc5,bc6,bc7,bc8) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
bb5
nom:
8010
rdg:
8016
diff:
bb6
nom:
7965
rdg:
7974
diff:
bb7
nom:
7920
rdg:
7933
diff:
bb8
nom:
7945
rdg:
7961
diff:
bc5
nom:
8110
rdg:
8121
diff:
bc6
nom:
8070
rdg:
8082
diff:
bc7
nom:
8020
rdg:
8035
diff:
bc8
nom:
8035
rdg:
8048
diff:
nom:
7766.67
rdg:
diff:

Averages of group AM3

Formula of calculation:

sum(aa9,aa10,af11,af12,af13,af14,ab9,ab10,aa11,aa12,aa13,aa14) / 12

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
aa9
nom:
7885
rdg:
7903
diff:
aa10
nom:
7845
rdg:
7865
diff:
af11
nom:
7800
rdg:
7824
diff:
af12
nom:
7780
rdg:
7804
diff:
af13
nom:
7730
rdg:
7754
diff:
af14
nom:
7700
rdg:
7722
diff:
ab9
nom:
7870
rdg:
7887
diff:
ab10
nom:
7830
rdg:
7852
diff:
aa11
nom:
7730
rdg:
7745
diff:
aa12
nom:
7705
rdg:
7722
diff:
aa13
nom:
7660
rdg:
7675
diff:
aa14
nom:
7665
rdg:
7680
diff:
nom:
7769.17
rdg:
diff:

Averages of group BM3

Formula of calculation:

sum(bb9,bb10,bb11,bb12,bb13,bb14,bc9,bc10,bc11,bc12,bc13,bc14) / 12

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
bb9
nom:
7880
rdg:
7897
diff:
bb10
nom:
7845
rdg:
7872
diff:
bb11
nom:
7705
rdg:
7725
diff:
bb12
nom:
7680
rdg:
7699
diff:
bb13
nom:
7635
rdg:
7651
diff:
bb14
nom:
7625
rdg:
7643
diff:
bc9
nom:
7975
rdg:
7996
diff:
bc10
nom:
7930
rdg:
7951
diff:
bc11
nom:
7795
rdg:
7814
diff:
bc12
nom:
7765
rdg:
7783
diff:
bc13
nom:
7705
rdg:
7725
diff:
bc14
nom:
7690
rdg:
7710
diff:
nom:
7404.17
rdg:
diff:

Averages of group ST1

Formula of calculation:

sum(aa15,aa16,aa17,bb15,bb16,bb17) / 6

Statistics of "04"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
aa15
nom:
7440
rdg:
7449
diff:
aa16
nom:
7395
rdg:
7404
diff:
aa17
nom:
7340
rdg:
7348
diff:
bb15
nom:
7450
rdg:
7458
diff:
bb16
nom:
7430
rdg:
7441
diff:
bb17
nom:
7370
rdg:
7378
diff:

Right riser

nom:
8118.13
rdg:
diff:

Averages of group AM1

Formula of calculation:

sum(aa1,aa2,aa3,aa4,ab1,ab2,ab3,ab4) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
aa1
nom:
8175
rdg:
8190
diff:
aa2
nom:
8130
rdg:
8143
diff:
aa3
nom:
8100
rdg:
8111
diff:
aa4
nom:
8130
rdg:
8139
diff:
ab1
nom:
8145
rdg:
8159
diff:
ab2
nom:
8095
rdg:
8109
diff:
ab3
nom:
8065
rdg:
8076
diff:
ab4
nom:
8105
rdg:
8114
diff:
nom:
8119.38
rdg:
diff:

Averages of group BM1

Formula of calculation:

sum(bb1,bb2,bb3,bb4,bc1,bc2,bc3,bc4) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
bb1
nom:
8105
rdg:
8118
diff:
bb2
nom:
8055
rdg:
8070
diff:
bb3
nom:
8035
rdg:
8045
diff:
bb4
nom:
8065
rdg:
8073
diff:
bc1
nom:
8210
rdg:
8224
diff:
bc2
nom:
8170
rdg:
8184
diff:
bc3
nom:
8145
rdg:
8155
diff:
bc4
nom:
8170
rdg:
8181
diff:
nom:
7996.88
rdg:
diff:

Averages of group AM2

Formula of calculation:

sum(aa5,aa6,aa7,aa8,ab5,ab6,ab7,ab8) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
aa5
nom:
8070
rdg:
8081
diff:
aa6
nom:
8020
rdg:
8031
diff:
aa7
nom:
7965
rdg:
7971
diff:
aa8
nom:
7985
rdg:
7991
diff:
ab5
nom:
8040
rdg:
8048
diff:
ab6
nom:
7995
rdg:
8000
diff:
ab7
nom:
7940
rdg:
7947
diff:
ab8
nom:
7960
rdg:
7971
diff:
nom:
8009.38
rdg:
diff:

Averages of group BM2

Formula of calculation:

sum(bb5,bb6,bb7,bb8,bc5,bc6,bc7,bc8) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
bb5
nom:
8010
rdg:
8023
diff:
bb6
nom:
7965
rdg:
7977
diff:
bb7
nom:
7920
rdg:
7929
diff:
bb8
nom:
7945
rdg:
7957
diff:
bc5
nom:
8110
rdg:
8125
diff:
bc6
nom:
8070
rdg:
8085
diff:
bc7
nom:
8020
rdg:
8033
diff:
bc8
nom:
8035
rdg:
8047
diff:
nom:
7766.67
rdg:
diff:

Averages of group AM3

Formula of calculation:

sum(aa9,aa10,af11,af12,af13,af14,ab9,ab10,aa11,aa12,aa13,aa14) / 12

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
aa9
nom:
7885
rdg:
7898
diff:
aa10
nom:
7845
rdg:
7863
diff:
af11
nom:
7800
rdg:
7822
diff:
af12
nom:
7780
rdg:
7807
diff:
af13
nom:
7730
rdg:
7752
diff:
af14
nom:
7700
rdg:
7722
diff:
ab9
nom:
7870
rdg:
7890
diff:
ab10
nom:
7830
rdg:
7851
diff:
aa11
nom:
7730
rdg:
7750
diff:
aa12
nom:
7705
rdg:
7724
diff:
aa13
nom:
7660
rdg:
7677
diff:
aa14
nom:
7665
rdg:
7681
diff:
nom:
7769.17
rdg:
diff:

Averages of group BM3

Formula of calculation:

sum(bb9,bb10,bb11,bb12,bb13,bb14,bc9,bc10,bc11,bc12,bc13,bc14) / 12

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
bb9
nom:
7880
rdg:
7898
diff:
bb10
nom:
7845
rdg:
7863
diff:
bb11
nom:
7705
rdg:
7726
diff:
bb12
nom:
7680
rdg:
7694
diff:
bb13
nom:
7635
rdg:
7653
diff:
bb14
nom:
7625
rdg:
7643
diff:
bc9
nom:
7975
rdg:
7994
diff:
bc10
nom:
7930
rdg:
7949
diff:
bc11
nom:
7795
rdg:
7813
diff:
bc12
nom:
7765
rdg:
7784
diff:
bc13
nom:
7705
rdg:
7722
diff:
bc14
nom:
7690
rdg:
7709
diff:
nom:
7404.17
rdg:
diff:

Averages of group ST1

Formula of calculation:

sum(aa15,aa16,aa17,bb15,bb16,bb17) / 6

Statistics of "04"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
aa15
nom:
7440
rdg:
7451
diff:
aa16
nom:
7395
rdg:
7405
diff:
aa17
nom:
7340
rdg:
7348
diff:
bb15
nom:
7450
rdg:
7463
diff:
bb16
nom:
7430
rdg:
7446
diff:
bb17
nom:
7370
rdg:
7381
diff:
 Help
AoI The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.
ref The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:
groups and rows Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points Clicking the white area beneath the suspension point name
nom The nominal length between suspension point and main riser loop.
rdg The actual reading from your measurement device. When measuring, rdg is the input field.
diff The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.
colors Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.
status Color coded dots are shown for manual, imported & laser values
Also take a look at the Manual

Continue trimming procedure

inject html