Help

AoI

The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.

ref

The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:

groups and rows	Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points	Clicking the white area beneath the suspension point name

nom

The nominal length between suspension point and main riser loop.

rdg

The actual reading from your measurement device. When measuring, rdg is the input field.

diff

The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.

colors

Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.

status

Color coded dots are shown for manual, imported & laser values

Also take a look at the Manual

Result

^{2026-05-08 19:26 UTC}

BGD Base 2 XS (2021)

General Information

Manufacturer	BGD GmbH
Model	Base 2
Year	2021
Size	XS
Line chart	Open
Total airtime	9h
Line set airtime	9h
Tolerance	+/- 10mm (Review)

Data integrity & access	Contains manual values

Settings

Manufacturer tolerance

Correction value

The deviation of the measured values from the nominal values is between 0 and 11mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

AR1

BR1

CR1

AR2

BR2

CR2

AR3

a10

a11

a12

a13

BR3

b10

b11

CR3

c10

c11

BR4

a14

a15

b12

b13

c12

AR1

BR1

CR1

AR2

BR2

CR2

AR3

a10

a11

a12

a13

BR3

b10

b11

CR3

c10

c11

BR4

a14

a15

b12

b13

c12

Offsets relative to median diff (-2)

AR1

BR1

CR1

AR2

BR2

CR2

AR3

BR3

CR3

BR4

AR1

BR1

CR1

AR2

BR2

CR2

AR3

BR3

CR3

BR4

Left riser

AR1

nom:

6828.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR1

Formula of calculation:

sum(a1,a2,a3,a4) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6886

rdg:

6885

diff:

nom:

6842

rdg:

6841

diff:

nom:

6788

rdg:

6786

diff:

nom:

6799

rdg:

6800

diff:

BR1

nom:

6723.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR1

Formula of calculation:

sum(b1,b2,b3,b4) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6768

rdg:

6769

diff:

nom:

6734

rdg:

6734

diff:

nom:

6695

rdg:

6696

diff:

nom:

6697

rdg:

6698

diff:

CR1

nom:

6866.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CR1

Formula of calculation:

sum(c1,c2,c3,c4,d1,d2,d3,d4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6863

rdg:

6864

diff:

nom:

6803

rdg:

6802

diff:

nom:

6765

rdg:

6766

diff:

nom:

6796

rdg:

6793

diff:

nom:

6990

rdg:

6988

diff:

nom:

6930

rdg:

6928

diff:

nom:

6878

rdg:

6876

diff:

nom:

6905

rdg:

6903

diff:

AR2

nom:

6634.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR2

Formula of calculation:

sum(a5,a6,a7,a8) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6712

rdg:

6710

diff:

nom:

6667

rdg:

6667

diff:

nom:

6583

rdg:

6584

diff:

nom:

6577

rdg:

6575

diff:

BR2

nom:

6569.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

2026-05-10 00:06CLCascade loop

Averages of group BR2

Formula of calculation:

sum(b5,b6,b7,b8) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6649

rdg:

6653

diff:

nom:

6588

rdg:

6594

diff:

nom:

6513

rdg:

6517

diff:

nom:

6527

rdg:

6532

diff:

CR2

nom:

6674.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CR2

Formula of calculation:

sum(c5,c6,c7,c8,d5,d6,d7,d8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6711

rdg:

6708

diff:

nom:

6648

rdg:

6646

diff:

nom:

6574

rdg:

6572

diff:

nom:

6591

rdg:

6587

diff:

nom:

6805

rdg:

6800

diff:

nom:

6740

rdg:

6734

diff:

nom:

6663

rdg:

6660

diff:

nom:

6662

rdg:

6656

diff:

AR3

nom:

6329.20

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR3

Formula of calculation:

sum(a9,a10,a11,a12,a13) / 5

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6451

rdg:

6446

diff:

a10

nom:

6360

rdg:

6359

diff:

a11

nom:

6335

rdg:

6333

diff:

a12

nom:

6262

rdg:

6260

diff:

a13

nom:

6238

rdg:

6236

diff:

BR3

nom:

6291.33

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

2026-05-10 00:06CLCascade loop

Averages of group BR3

Formula of calculation:

sum(b9,b10,b11) / 3

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6388

rdg:

6390

diff:

b10

nom:

6270

rdg:

6270

diff:

b11

nom:

6216

rdg:

6218

diff:

CR3

nom:

6361.33

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CR3

Formula of calculation:

sum(c9,c10,c11) / 3

Statistics of "04"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6460

rdg:

6453

diff:

c10

nom:

6341

rdg:

6334

diff:

c11

nom:

6283

rdg:

6283

diff:

BR4

nom:

6104.40

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

2026-05-10 00:06Cascade loop dubble on line c12 only to balance out the diff

Averages of group BR4

Formula of calculation:

sum(a14,a15,b12,b13,c12) / 5

Statistics of "04"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

a14

nom:

6058

rdg:

6056

diff:

a15

nom:

6030

rdg:

6025

diff:

b12

nom:

6079

rdg:

6072

diff:

b13

nom:

6122

rdg:

6111

diff:

c12

nom:

6233

rdg:

6235

diff:

Right riser

AR1

nom:

6828.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR1

Formula of calculation:

sum(a1,a2,a3,a4) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6886

rdg:

6883

diff:

nom:

6842

rdg:

6842

diff:

nom:

6788

rdg:

6788

diff:

nom:

6799

rdg:

6796

diff:

BR1

nom:

6723.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR1

Formula of calculation:

sum(b1,b2,b3,b4) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6768

rdg:

6769

diff:

nom:

6734

rdg:

6736

diff:

nom:

6695

rdg:

6696

diff:

nom:

6697

rdg:

6695

diff:

CR1

nom:

6866.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CR1

Formula of calculation:

sum(c1,c2,c3,c4,d1,d2,d3,d4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6863

rdg:

6861

diff:

nom:

6803

rdg:

6802

diff:

nom:

6765

rdg:

6765

diff:

nom:

6796

rdg:

6795

diff:

nom:

6990

rdg:

6985

diff:

nom:

6930

rdg:

6929

diff:

nom:

6878

rdg:

6877

diff:

nom:

6905

rdg:

6903

diff:

AR2

nom:

6634.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR2

Formula of calculation:

sum(a5,a6,a7,a8) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6712

rdg:

6711

diff:

nom:

6667

rdg:

6666

diff:

nom:

6583

rdg:

6584

diff:

nom:

6577

rdg:

6579

diff:

BR2

nom:

6569.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

2026-05-10 00:06CLCascade loop

Averages of group BR2

Formula of calculation:

sum(b5,b6,b7,b8) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6649

rdg:

6654

diff:

nom:

6588

rdg:

6592

diff:

nom:

6513

rdg:

6516

diff:

nom:

6527

rdg:

6529

diff:

CR2

nom:

6674.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CR2

Formula of calculation:

sum(c5,c6,c7,c8,d5,d6,d7,d8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6711

rdg:

6710

diff:

nom:

6648

rdg:

6646

diff:

nom:

6574

rdg:

6569

diff:

nom:

6591

rdg:

6589

diff:

nom:

6805

rdg:

6799

diff:

nom:

6740

rdg:

6735

diff:

nom:

6663

rdg:

6660

diff:

nom:

6662

rdg:

6658

diff:

AR3

nom:

6329.20

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR3

Formula of calculation:

sum(a9,a10,a11,a12,a13) / 5

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6451

rdg:

6445

diff:

a10

nom:

6360

rdg:

6356

diff:

a11

nom:

6335

rdg:

6329

diff:

a12

nom:

6262

rdg:

6260

diff:

a13

nom:

6238

rdg:

6236

diff:

BR3

nom:

6291.33

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

2026-05-10 00:06CLCascade loop

Averages of group BR3

Formula of calculation:

sum(b9,b10,b11) / 3

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6388

rdg:

6388

diff:

b10

nom:

6270

rdg:

6272

diff:

b11

nom:

6216

rdg:

6217

diff:

CR3

nom:

6361.33

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CR3

Formula of calculation:

sum(c9,c10,c11) / 3

Statistics of "04"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6460

rdg:

6456

diff:

c10

nom:

6341

rdg:

6337

diff:

c11

nom:

6283

rdg:

6281

diff:

BR4

nom:

6104.40

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

2026-05-10 00:06Cascade loop dubble on line c12 only to balance out the diff

Averages of group BR4

Formula of calculation:

sum(a14,a15,b12,b13,c12) / 5

Statistics of "04"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

a14

nom:

6058

rdg:

6055

diff:

a15

nom:

6030

rdg:

6023

diff:

b12

nom:

6079

rdg:

6074

diff:

b13

nom:

6122

rdg:

6114

diff:

c12

nom:

6233

rdg:

6236

diff:

Continue trimming procedure

inject html