Result

^{2026-09-16 23:49 UTC}

Flow XCRacer 2 ML (2023)

General Information

Manufacturer	Flow Paragliders
Model	XCRacer 2
Year	2023
Size	ML
Production date	2023-12
Line chart	Open
Total airtime	149h
Line set airtime	149h
Tolerance	+/- 10mm (Review)

Data integrity & access	Contains manual values

Settings

Manufacturer tolerance

Correction value

The deviation of the measured values from the nominal values is between 15 and 47mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

Amain1

ab1

ab2

ab3

ab4

Bmain1

Amain2

ab5

ab6

ab7

ab8

Bmain2

Amain3

a10

a11

a12

a13

ab9

b12

b13

Bmain3

b10

b11

Amain1

ab1

ab2

ab3

ab4

Bmain1

Amain2

ab5

ab6

ab7

ab8

Bmain2

Amain3

a10

a11

a12

a13

ab9

b12

b13

Bmain3

b10

b11

Offsets relative to median diff (30)

Amain1

Bmain1

Amain2

Bmain2

Amain3

Bmain3

Amain1

Bmain1

Amain2

Bmain2

Amain3

Bmain3

Left riser

Amain1

nom:

7555.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group Amain1

Formula of calculation:

sum(a1,a2,a3,a4,ab1,ab2,ab3,ab4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7655

rdg:

7683

diff:

nom:

7543

rdg:

7571

diff:

nom:

7516

rdg:

7547

diff:

nom:

7577

rdg:

7610

diff:

ab1

nom:

7618

rdg:

7652

diff:

ab2

nom:

7507

rdg:

7539

diff:

ab3

nom:

7481

rdg:

7511

diff:

ab4

nom:

7545

rdg:

7575

diff:

Bmain1

nom:

7587.13

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group Bmain1

Formula of calculation:

sum(b1,b2,b3,b4,c1,c2,c3,c4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7660

rdg:

7689

diff:

nom:

7527

rdg:

7553

diff:

nom:

7471

rdg:

7497

diff:

nom:

7505

rdg:

7540

diff:

nom:

7753

rdg:

7781

diff:

nom:

7623

rdg:

7651

diff:

nom:

7567

rdg:

7602

diff:

nom:

7591

rdg:

7622

diff:

Amain2

nom:

7333.63

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group Amain2

Formula of calculation:

sum(a5,a6,a7,a8,ab5,ab6,ab7,ab8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7480

rdg:

7518

diff:

nom:

7334

rdg:

7369

diff:

nom:

7266

rdg:

7297

diff:

nom:

7296

rdg:

7332

diff:

ab5

nom:

7458

rdg:

7492

diff:

ab6

nom:

7311

rdg:

7343

diff:

ab7

nom:

7245

rdg:

7278

diff:

ab8

nom:

7279

rdg:

7316

diff:

Bmain2

nom:

7388.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group Bmain2

Formula of calculation:

sum(b5,b6,b7,b8,c5,c6,c7,c8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7475

rdg:

7513

diff:

nom:

7337

rdg:

7376

diff:

nom:

7278

rdg:

7316

diff:

nom:

7303

rdg:

7350

diff:

nom:

7568

rdg:

7602

diff:

nom:

7425

rdg:

7463

diff:

nom:

7359

rdg:

7386

diff:

nom:

7366

rdg:

7403

diff:

Amain3

nom:

7011.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group Amain3

Formula of calculation:

sum(a9,a10,a11,ab9) / 4

Amain3 contains suspension points that are excluded from the average:

a12,a13,b12,b13

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7061

rdg:

7085

diff:

a10

nom:

6983

rdg:

7006

diff:

a11

nom:

6956

rdg:

6981

diff:

a12

nom:

6871

rdg:

6891

diff:

a13

nom:

6914

rdg:

6940

diff:

ab9

nom:

7045

rdg:

7072

diff:

b12

nom:

6916

rdg:

6931

diff:

b13

nom:

6971

rdg:

6988

diff:

Bmain3

nom:

7013.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group Bmain3

Formula of calculation:

sum(b9,b10,b11) / 3

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7086

rdg:

7120

diff:

b10

nom:

6995

rdg:

7022

diff:

b11

nom:

6960

rdg:

6992

diff:

Right riser

Amain1

nom:

7555.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group Amain1

Formula of calculation:

sum(a1,a2,a3,a4,ab1,ab2,ab3,ab4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7655

rdg:

7690

diff:

nom:

7543

rdg:

7571

diff:

nom:

7516

rdg:

7542

diff:

nom:

7577

rdg:

7606

diff:

ab1

nom:

7618

rdg:

7642

diff:

ab2

nom:

7507

rdg:

7533

diff:

ab3

nom:

7481

rdg:

7504

diff:

ab4

nom:

7545

rdg:

7572

diff:

Bmain1

nom:

7587.13

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group Bmain1

Formula of calculation:

sum(b1,b2,b3,b4,c1,c2,c3,c4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7660

rdg:

7686

diff:

nom:

7527

rdg:

7551

diff:

nom:

7471

rdg:

7500

diff:

nom:

7505

rdg:

7539

diff:

nom:

7753

rdg:

7778

diff:

nom:

7623

rdg:

7654

diff:

nom:

7567

rdg:

7593

diff:

nom:

7591

rdg:

7628

diff:

Amain2

nom:

7333.63

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group Amain2

Formula of calculation:

sum(a5,a6,a7,a8,ab5,ab6,ab7,ab8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7480

rdg:

7514

diff:

nom:

7334

rdg:

7364

diff:

nom:

7266

rdg:

7289

diff:

nom:

7296

rdg:

7325

diff:

ab5

nom:

7458

rdg:

7487

diff:

ab6

nom:

7311

rdg:

7335

diff:

ab7

nom:

7245

rdg:

7277

diff:

ab8

nom:

7279

rdg:

7308

diff:

Bmain2

nom:

7388.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group Bmain2

Formula of calculation:

sum(b5,b6,b7,b8,c5,c6,c7,c8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7475

rdg:

7509

diff:

nom:

7337

rdg:

7368

diff:

nom:

7278

rdg:

7312

diff:

nom:

7303

rdg:

7340

diff:

nom:

7568

rdg:

7600

diff:

nom:

7425

rdg:

7459

diff:

nom:

7359

rdg:

7391

diff:

nom:

7366

rdg:

7400

diff:

Amain3

nom:

7011.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group Amain3

Formula of calculation:

sum(a9,a10,a11,ab9) / 4

Amain3 contains suspension points that are excluded from the average:

a12,a13,b12,b13

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7061

rdg:

7087

diff:

a10

nom:

6983

rdg:

7003

diff:

a11

nom:

6956

rdg:

6986

diff:

a12

nom:

6871

rdg:

6886

diff:

a13

nom:

6914

rdg:

6934

diff:

ab9

nom:

7045

rdg:

7075

diff:

b12

nom:

6916

rdg:

6931

diff:

b13

nom:

6971

rdg:

6987

diff:

Bmain3

nom:

7013.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group Bmain3

Formula of calculation:

sum(b9,b10,b11) / 3

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7086

rdg:

7115

diff:

b10

nom:

6995

rdg:

7019

diff:

b11

nom:

6960

rdg:

6990

diff:

Help

AoI

The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.

ref

The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:

groups and rows	Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points	Clicking the white area beneath the suspension point name

nom

The nominal length between suspension point and main riser loop.

rdg

The actual reading from your measurement device. When measuring, rdg is the input field.

diff

The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.

colors

Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.

status

Color coded dots are shown for manual, imported & laser values

Also take a look at the Manual

Continue trimming procedure

inject html