Result

^{2026-09-30 13:32 UTC}

Gin GTO 3 S (2025)

General Information

Manufacturer	Gin Gliders Inc.
Model	GTO 3
Year	2025
Size	S
Production date	2025-06
Line chart	Open
Total airtime	120h
Line set airtime	120h
Tolerance	+/- 10mm (Review)

Data integrity & access	Checksum valid

Settings

Manufacturer tolerance

Correction value

The deviation of the measured values from the nominal values is between 0 and -35mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

MAIN A1

a2/1

a2/2

a2/3

a2/4

MAIN B1

MAIN A2

a2/5

a2/6

a2/7

a2/8

MAIN B2

MAIN A3

a10

a11

a12

a13

a14

b13

b14

MAIN B3

b10

b11

b12

MAIN A1

a2/1

a2/2

a2/3

a2/4

MAIN B1

MAIN A2

a2/5

a2/6

a2/7

a2/8

MAIN B2

MAIN A3

a10

a11

a12

a13

a14

b13

b14

MAIN B3

b10

b11

b12

Offsets relative to median diff (-5)

MAIN A1

MAIN B1

MAIN A2

MAIN B2

MAIN A3

MAIN B3

MAIN A1

MAIN B1

MAIN A2

MAIN B2

MAIN A3

MAIN B3

Left riser

MAIN A1

nom:

7616.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN A1

Formula of calculation:

sum(a1,a2,a3,a4,a2/1,a2/2,a2/3,a2/4) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7733

rdg:

7735

diff:

nom:

7613

rdg:

7617

diff:

nom:

7573

rdg:

7577

diff:

nom:

7623

rdg:

7621

diff:

a2/1

nom:

7693

rdg:

7695

diff:

a2/2

nom:

7573

rdg:

7574

diff:

a2/3

nom:

7538

rdg:

7535

diff:

a2/4

nom:

7588

rdg:

7584

diff:

MAIN B1

nom:

7644.63

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN B1

Formula of calculation:

sum(b1,b2,b3,b4,c1,c2,c3,c4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7684

rdg:

7679

diff:

nom:

7564

rdg:

7558

diff:

nom:

7529

rdg:

7523

diff:

nom:

7579

rdg:

7573

diff:

nom:

7794

rdg:

7780

diff:

nom:

7679

rdg:

7663

diff:

nom:

7644

rdg:

7616

diff:

nom:

7684

rdg:

7654

diff:

MAIN A2

nom:

7389.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN A2

Formula of calculation:

sum(a5,a6,a7,a8,a2/5,a2/6,a2/7,a2/8) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7553

rdg:

7557

diff:

nom:

7408

rdg:

7405

diff:

nom:

7338

rdg:

7336

diff:

nom:

7323

rdg:

7321

diff:

a2/5

nom:

7513

rdg:

7509

diff:

a2/6

nom:

7378

rdg:

7376

diff:

a2/7

nom:

7308

rdg:

7307

diff:

a2/8

nom:

7298

rdg:

7295

diff:

MAIN B2

nom:

7410.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN B2

Formula of calculation:

sum(b5,b6,b7,b8,c5,c6,c7,c8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7494

rdg:

7489

diff:

nom:

7364

rdg:

7363

diff:

nom:

7299

rdg:

7301

diff:

nom:

7304

rdg:

7303

diff:

nom:

7594

rdg:

7572

diff:

nom:

7464

rdg:

7447

diff:

nom:

7384

rdg:

7368

diff:

nom:

7384

rdg:

7365

diff:

MAIN A3

nom:

6996.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN A3

Formula of calculation:

sum(a9,a10,a11,a12) / 4

MAIN A3 contains suspension points that are excluded from the average:

a13,a14,b13,b14

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7126

rdg:

7114

diff:

a10

nom:

7016

rdg:

7003

diff:

a11

nom:

6931

rdg:

6925

diff:

a12

nom:

6911

rdg:

6896

diff:

a13

nom:

6773

rdg:

6742

diff:

a14

nom:

6753

rdg:

6720

diff:

b13

nom:

6783

rdg:

6754

diff:

b14

nom:

6763

rdg:

6728

diff:

MAIN B3

nom:

6999.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN B3

Formula of calculation:

sum(b9,b10,b11,b12) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7128

rdg:

7116

diff:

b10

nom:

7018

rdg:

7006

diff:

b11

nom:

6938

rdg:

6938

diff:

b12

nom:

6913

rdg:

6905

diff:

Right riser

MAIN A1

nom:

7616.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN A1

Formula of calculation:

sum(a1,a2,a3,a4,a2/1,a2/2,a2/3,a2/4) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7733

rdg:

7730

diff:

nom:

7613

rdg:

7611

diff:

nom:

7573

rdg:

7568

diff:

nom:

7623

rdg:

7622

diff:

a2/1

nom:

7693

rdg:

7693

diff:

a2/2

nom:

7573

rdg:

7573

diff:

a2/3

nom:

7538

rdg:

7539

diff:

a2/4

nom:

7588

rdg:

7591

diff:

MAIN B1

nom:

7644.63

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN B1

Formula of calculation:

sum(b1,b2,b3,b4,c1,c2,c3,c4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7684

rdg:

7676

diff:

nom:

7564

rdg:

7560

diff:

nom:

7529

rdg:

7525

diff:

nom:

7579

rdg:

7576

diff:

nom:

7794

rdg:

7778

diff:

nom:

7679

rdg:

7656

diff:

nom:

7644

rdg:

7621

diff:

nom:

7684

rdg:

7654

diff:

MAIN A2

nom:

7389.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN A2

Formula of calculation:

sum(a5,a6,a7,a8,a2/5,a2/6,a2/7,a2/8) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7553

rdg:

7552

diff:

nom:

7408

rdg:

7412

diff:

nom:

7338

rdg:

7335

diff:

nom:

7323

rdg:

7317

diff:

a2/5

nom:

7513

rdg:

7515

diff:

a2/6

nom:

7378

rdg:

7380

diff:

a2/7

nom:

7308

rdg:

7302

diff:

a2/8

nom:

7298

rdg:

7297

diff:

MAIN B2

nom:

7410.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN B2

Formula of calculation:

sum(b5,b6,b7,b8,c5,c6,c7,c8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7494

rdg:

7492

diff:

nom:

7364

rdg:

7360

diff:

nom:

7299

rdg:

7298

diff:

nom:

7304

rdg:

7304

diff:

nom:

7594

rdg:

7574

diff:

nom:

7464

rdg:

7452

diff:

nom:

7384

rdg:

7369

diff:

nom:

7384

rdg:

7368

diff:

MAIN A3

nom:

6996.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN A3

Formula of calculation:

sum(a9,a10,a11,a12) / 4

MAIN A3 contains suspension points that are excluded from the average:

a13,a14,b13,b14

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7126

rdg:

7118

diff:

a10

nom:

7016

rdg:

7012

diff:

a11

nom:

6931

rdg:

6924

diff:

a12

nom:

6911

rdg:

6909

diff:

a13

nom:

6773

rdg:

6757

diff:

a14

nom:

6753

rdg:

6723

diff:

b13

nom:

6783

rdg:

6766

diff:

b14

nom:

6763

rdg:

6744

diff:

MAIN B3

nom:

6999.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN B3

Formula of calculation:

sum(b9,b10,b11,b12) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7128

rdg:

7112

diff:

b10

nom:

7018

rdg:

7008

diff:

b11

nom:

6938

rdg:

6930

diff:

b12

nom:

6913

rdg:

6902

diff:

Help

AoI

The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.

ref

The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:

groups and rows	Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points	Clicking the white area beneath the suspension point name

nom

The nominal length between suspension point and main riser loop.

rdg

The actual reading from your measurement device. When measuring, rdg is the input field.

diff

The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.

colors

Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.

status

Color coded dots are shown for manual, imported & laser values

Also take a look at the Manual

Continue trimming procedure

inject html