Result

^{2026-06-26 23:44 UTC}

Gin GTO 3 L (2025)

General Information

Manufacturer	Gin Gliders Inc.
Model	GTO 3
Year	2025
Size	L
Production date	2025-01
Line chart	Open
Total airtime	150h
Line set airtime	150h
Tolerance	+/- 10mm (Review)

Data integrity & access	Contains manual values

Settings

Manufacturer tolerance

Correction value

The deviation of the measured values from the nominal values is between 0 and -24mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

MAIN A1

a2/1

a2/2

a2/3

a2/4

MAIN B1

MAIN A2

a2/5

a2/6

a2/7

a2/8

MAIN B2

MAIN A3

a10

a11

a12

a13

a14

b13

b14

MAIN B3

b10

b11

b12

MAIN A1

a2/1

a2/2

a2/3

a2/4

MAIN B1

MAIN A2

a2/5

a2/6

a2/7

a2/8

MAIN B2

MAIN A3

a10

a11

a12

a13

a14

b13

b14

MAIN B3

b10

b11

b12

Offsets relative to median diff (-3)

MAIN A1

MAIN B1

MAIN A2

MAIN B2

MAIN A3

MAIN B3

MAIN A1

MAIN B1

MAIN A2

MAIN B2

MAIN A3

MAIN B3

Left riser

MAIN A1

nom:

8159.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN A1

Formula of calculation:

sum(a1,a2,a3,a4,a2/1,a2/2,a2/3,a2/4) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

8283

rdg:

8278

diff:

nom:

8153

rdg:

8154

diff:

nom:

8113

rdg:

8110

diff:

nom:

8168

rdg:

8163

diff:

a2/1

nom:

8238

rdg:

8235

diff:

a2/2

nom:

8113

rdg:

8110

diff:

a2/3

nom:

8078

rdg:

8073

diff:

a2/4

nom:

8128

rdg:

8126

diff:

MAIN B1

nom:

8187.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN B1

Formula of calculation:

sum(b1,b2,b3,b4,c1,c2,c3,c4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

8229

rdg:

8234

diff:

nom:

8099

rdg:

8105

diff:

nom:

8064

rdg:

8071

diff:

nom:

8119

rdg:

8126

diff:

nom:

8344

rdg:

8343

diff:

nom:

8229

rdg:

8231

diff:

nom:

8189

rdg:

8188

diff:

nom:

8229

rdg:

8227

diff:

MAIN A2

nom:

7921.13

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN A2

Formula of calculation:

sum(a5,a6,a7,a8,a2/5,a2/6,a2/7,a2/8) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

8093

rdg:

8092

diff:

nom:

7943

rdg:

7946

diff:

nom:

7863

rdg:

7864

diff:

nom:

7853

rdg:

7848

diff:

a2/5

nom:

8053

rdg:

8054

diff:

a2/6

nom:

7908

rdg:

7913

diff:

a2/7

nom:

7833

rdg:

7831

diff:

a2/8

nom:

7823

rdg:

7820

diff:

MAIN B2

nom:

7944.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN B2

Formula of calculation:

sum(b5,b6,b7,b8,c5,c6,c7,c8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

8034

rdg:

8040

diff:

nom:

7894

rdg:

7904

diff:

nom:

7824

rdg:

7831

diff:

nom:

7829

rdg:

7836

diff:

nom:

8139

rdg:

8139

diff:

nom:

7999

rdg:

8002

diff:

nom:

7919

rdg:

7918

diff:

nom:

7914

rdg:

7910

diff:

MAIN A3

nom:

7501.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN A3

Formula of calculation:

sum(a9,a10,a11,a12) / 4

MAIN A3 contains suspension points that are excluded from the average:

a13,a14,b13,b14

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7641

rdg:

7644

diff:

a10

nom:

7521

rdg:

7524

diff:

a11

nom:

7431

rdg:

7434

diff:

a12

nom:

7411

rdg:

7413

diff:

a13

nom:

7263

rdg:

7251

diff:

a14

nom:

7233

rdg:

7209

diff:

b13

nom:

7273

rdg:

7260

diff:

b14

nom:

7248

rdg:

7226

diff:

MAIN B3

nom:

7501.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN B3

Formula of calculation:

sum(b9,b10,b11,b12) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7638

rdg:

7640

diff:

b10

nom:

7523

rdg:

7527

diff:

b11

nom:

7438

rdg:

7440

diff:

b12

nom:

7408

rdg:

7407

diff:

Right riser

MAIN A1

nom:

8159.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN A1

Formula of calculation:

sum(a1,a2,a3,a4,a2/1,a2/2,a2/3,a2/4) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

8283

rdg:

8280

diff:

nom:

8153

rdg:

8146

diff:

nom:

8113

rdg:

8108

diff:

nom:

8168

rdg:

8165

diff:

a2/1

nom:

8238

rdg:

8235

diff:

a2/2

nom:

8113

rdg:

8108

diff:

a2/3

nom:

8078

rdg:

8075

diff:

a2/4

nom:

8128

rdg:

8127

diff:

MAIN B1

nom:

8187.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN B1

Formula of calculation:

sum(b1,b2,b3,b4,c1,c2,c3,c4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

8229

rdg:

8238

diff:

nom:

8099

rdg:

8106

diff:

nom:

8064

rdg:

8069

diff:

nom:

8119

rdg:

8125

diff:

nom:

8344

rdg:

8344

diff:

nom:

8229

rdg:

8227

diff:

nom:

8189

rdg:

8182

diff:

nom:

8229

rdg:

8224

diff:

MAIN A2

nom:

7921.13

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN A2

Formula of calculation:

sum(a5,a6,a7,a8,a2/5,a2/6,a2/7,a2/8) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

8093

rdg:

8082

diff:

nom:

7943

rdg:

7938

diff:

nom:

7863

rdg:

7860

diff:

nom:

7853

rdg:

7845

diff:

a2/5

nom:

8053

rdg:

8050

diff:

a2/6

nom:

7908

rdg:

7905

diff:

a2/7

nom:

7833

rdg:

7834

diff:

a2/8

nom:

7823

rdg:

7820

diff:

MAIN B2

nom:

7944.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN B2

Formula of calculation:

sum(b5,b6,b7,b8,c5,c6,c7,c8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

8034

rdg:

8037

diff:

nom:

7894

rdg:

7898

diff:

nom:

7824

rdg:

7825

diff:

nom:

7829

rdg:

7828

diff:

nom:

8139

rdg:

8131

diff:

nom:

7999

rdg:

7992

diff:

nom:

7919

rdg:

7911

diff:

nom:

7914

rdg:

7901

diff:

MAIN A3

nom:

7501.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN A3

Formula of calculation:

sum(a9,a10,a11,a12) / 4

MAIN A3 contains suspension points that are excluded from the average:

a13,a14,b13,b14

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7641

rdg:

7637

diff:

a10

nom:

7521

rdg:

7515

diff:

a11

nom:

7431

rdg:

7424

diff:

a12

nom:

7411

rdg:

7404

diff:

a13

nom:

7263

rdg:

7245

diff:

a14

nom:

7233

rdg:

7209

diff:

b13

nom:

7273

rdg:

7255

diff:

b14

nom:

7248

rdg:

7227

diff:

MAIN B3

nom:

7501.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN B3

Formula of calculation:

sum(b9,b10,b11,b12) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7638

rdg:

7631

diff:

b10

nom:

7523

rdg:

7518

diff:

b11

nom:

7438

rdg:

7429

diff:

b12

nom:

7408

rdg:

7399

diff:

Help

AoI

The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.

ref

The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:

groups and rows	Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points	Clicking the white area beneath the suspension point name

nom

The nominal length between suspension point and main riser loop.

rdg

The actual reading from your measurement device. When measuring, rdg is the input field.

diff

The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.

colors

Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.

status

Color coded dots are shown for manual, imported & laser values

Also take a look at the Manual

Continue trimming procedure

inject html