Result

^{2026-07-14 19:16 UTC}

Gin GTO 3 M (2025)

General Information

Manufacturer	Gin Gliders Inc.
Model	GTO 3
Year	2025
Size	M
Production date	2025-01
Line chart	Open
Total airtime	n/a
Line set airtime	n/a
Tolerance	+/- 10mm (Review)

Data integrity & access	Backdated during import

Settings

Manufacturer tolerance

Correction value

The deviation of the measured values from the nominal values is between 0 and 23mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

MAIN A1

a2/1

a2/2

a2/3

a2/4

MAIN B1

MAIN A2

a2/5

a2/6

a2/7

a2/8

MAIN B2

MAIN A3

a10

a11

a12

a13

a14

b13

b14

MAIN B3

b10

b11

b12

MAIN A1

a2/1

a2/2

a2/3

a2/4

MAIN B1

MAIN A2

a2/5

a2/6

a2/7

a2/8

MAIN B2

MAIN A3

a10

a11

a12

a13

a14

b13

b14

MAIN B3

b10

b11

b12

Offsets relative to median diff (11)

MAIN A1

MAIN B1

MAIN A2

MAIN B2

MAIN A3

MAIN B3

MAIN A1

MAIN B1

MAIN A2

MAIN B2

MAIN A3

MAIN B3

Left riser

MAIN A1

nom:

7884.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN A1

Formula of calculation:

sum(a1,a2,a3,a4,a2/1,a2/2,a2/3,a2/4) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

8003

rdg:

8012

diff:

nom:

7883

rdg:

7894

diff:

nom:

7843

rdg:

7857

diff:

nom:

7893

rdg:

7906

diff:

a2/1

nom:

7963

rdg:

7972

diff:

a2/2

nom:

7838

rdg:

7852

diff:

a2/3

nom:

7803

rdg:

7819

diff:

a2/4

nom:

7853

rdg:

7867

diff:

MAIN B1

nom:

7914.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN B1

Formula of calculation:

sum(b1,b2,b3,b4,c1,c2,c3,c4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7954

rdg:

7971

diff:

nom:

7829

rdg:

7847

diff:

nom:

7794

rdg:

7812

diff:

nom:

7849

rdg:

7862

diff:

nom:

8069

rdg:

8075

diff:

nom:

7949

rdg:

7957

diff:

nom:

7914

rdg:

7919

diff:

nom:

7954

rdg:

7961

diff:

MAIN A2

nom:

7652.38

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN A2

Formula of calculation:

sum(a5,a6,a7,a8,a2/5,a2/6,a2/7,a2/8) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7818

rdg:

7831

diff:

nom:

7673

rdg:

7691

diff:

nom:

7598

rdg:

7616

diff:

nom:

7588

rdg:

7609

diff:

a2/5

nom:

7778

rdg:

7795

diff:

a2/6

nom:

7638

rdg:

7659

diff:

a2/7

nom:

7568

rdg:

7589

diff:

a2/8

nom:

7558

rdg:

7579

diff:

MAIN B2

nom:

7674.63

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN B2

Formula of calculation:

sum(b5,b6,b7,b8,c5,c6,c7,c8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7764

rdg:

7785

diff:

nom:

7624

rdg:

7647

diff:

nom:

7559

rdg:

7581

diff:

nom:

7564

rdg:

7585

diff:

nom:

7864

rdg:

7873

diff:

nom:

7729

rdg:

7744

diff:

nom:

7649

rdg:

7650

diff:

nom:

7644

rdg:

7654

diff:

MAIN A3

nom:

7247.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN A3

Formula of calculation:

sum(a9,a10,a11,a12) / 4

MAIN A3 contains suspension points that are excluded from the average:

a13,a14,b13,b14

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7381

rdg:

7388

diff:

a10

nom:

7266

rdg:

7271

diff:

a11

nom:

7181

rdg:

7192

diff:

a12

nom:

7161

rdg:

7169

diff:

a13

nom:

7018

rdg:

7007

diff:

a14

nom:

6988

rdg:

6977

diff:

b13

nom:

7023

rdg:

7014

diff:

b14

nom:

7003

rdg:

6996

diff:

MAIN B3

nom:

7248.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN B3

Formula of calculation:

sum(b9,b10,b11,b12) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7378

rdg:

7390

diff:

b10

nom:

7268

rdg:

7281

diff:

b11

nom:

7188

rdg:

7199

diff:

b12

nom:

7158

rdg:

7166

diff:

Right riser

MAIN A1

nom:

7884.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN A1

Formula of calculation:

sum(a1,a2,a3,a4,a2/1,a2/2,a2/3,a2/4) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

8003

rdg:

8006

diff:

nom:

7883

rdg:

7892

diff:

nom:

7843

rdg:

7852

diff:

nom:

7893

rdg:

7898

diff:

a2/1

nom:

7963

rdg:

7970

diff:

a2/2

nom:

7838

rdg:

7849

diff:

a2/3

nom:

7803

rdg:

7811

diff:

a2/4

nom:

7853

rdg:

7859

diff:

MAIN B1

nom:

7914.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN B1

Formula of calculation:

sum(b1,b2,b3,b4,c1,c2,c3,c4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7954

rdg:

7963

diff:

nom:

7829

rdg:

7839

diff:

nom:

7794

rdg:

7805

diff:

nom:

7849

rdg:

7857

diff:

nom:

8069

rdg:

8069

diff:

nom:

7949

rdg:

7955

diff:

nom:

7914

rdg:

7915

diff:

nom:

7954

rdg:

7954

diff:

MAIN A2

nom:

7652.38

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN A2

Formula of calculation:

sum(a5,a6,a7,a8,a2/5,a2/6,a2/7,a2/8) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7818

rdg:

7833

diff:

nom:

7673

rdg:

7687

diff:

nom:

7598

rdg:

7613

diff:

nom:

7588

rdg:

7603

diff:

a2/5

nom:

7778

rdg:

7792

diff:

a2/6

nom:

7638

rdg:

7656

diff:

a2/7

nom:

7568

rdg:

7583

diff:

a2/8

nom:

7558

rdg:

7574

diff:

MAIN B2

nom:

7674.63

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN B2

Formula of calculation:

sum(b5,b6,b7,b8,c5,c6,c7,c8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7764

rdg:

7783

diff:

nom:

7624

rdg:

7642

diff:

nom:

7559

rdg:

7580

diff:

nom:

7564

rdg:

7584

diff:

nom:

7864

rdg:

7873

diff:

nom:

7729

rdg:

7745

diff:

nom:

7649

rdg:

7663

diff:

nom:

7644

rdg:

7658

diff:

MAIN A3

nom:

7247.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN A3

Formula of calculation:

sum(a9,a10,a11,a12) / 4

MAIN A3 contains suspension points that are excluded from the average:

a13,a14,b13,b14

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7381

rdg:

7387

diff:

a10

nom:

7266

rdg:

7274

diff:

a11

nom:

7181

rdg:

7187

diff:

a12

nom:

7161

rdg:

7170

diff:

a13

nom:

7018

rdg:

7007

diff:

a14

nom:

6988

rdg:

6975

diff:

b13

nom:

7023

rdg:

7018

diff:

b14

nom:

7003

rdg:

6994

diff:

MAIN B3

nom:

7248.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group MAIN B3

Formula of calculation:

sum(b9,b10,b11,b12) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7378

rdg:

7386

diff:

b10

nom:

7268

rdg:

7276

diff:

b11

nom:

7188

rdg:

7196

diff:

b12

nom:

7158

rdg:

7160

diff:

Help

AoI

The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.

ref

The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:

groups and rows	Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points	Clicking the white area beneath the suspension point name

nom

The nominal length between suspension point and main riser loop.

rdg

The actual reading from your measurement device. When measuring, rdg is the input field.

diff

The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.

colors

Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.

status

Color coded dots are shown for manual, imported & laser values

Also take a look at the Manual

Continue trimming procedure

inject html