Help
AoI The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.
ref The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:
groups and rows Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points Clicking the white area beneath the suspension point name
nom The nominal length between suspension point and main riser loop.
rdg The actual reading from your measurement device. When measuring, rdg is the input field.
diff The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.
colors Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.
status Color coded dots are shown for manual, imported & laser values
Also take a look at the Manual

Result

2026-03-30 00:31 UTC

Niviuk Artik R 27 (2023)

General Information
ManufacturerNiviuk Paragliders
ModelArtik R
Year2023
Size27
Line chartOpen
Total airtime141h
Line set airtime141h
Tolerance +/- 10mm (Review)
Data integrity & access
    Wing as seen from above in flight

    3A1

    a1
    a2
    a3
    a4
    b1
    b2
    b3
    b4

    3C1

    c1
    c2
    c3
    c4
    d1
    d2
    d3
    d4

    3A2

    a5
    a6
    a7
    a8
    b5
    b6
    b7
    b8

    3C2

    c5
    c6
    c7
    c8
    d5
    d6
    d7
    d8

    3A3

    a9
    a10
    a11
    a12
    a13
    a14

    3C3

    c9
    c10
    c11
    c12
    c13
    c14
    d9
    d10
    d11
    d12
    d13
    d14

    stab

    a15
    a16
    c15
    c16

    3A1

    a1
    a2
    a3
    a4
    b1
    b2
    b3
    b4

    3C1

    c1
    c2
    c3
    c4
    d1
    d2
    d3
    d4

    3A2

    a5
    a6
    a7
    a8
    b5
    b6
    b7
    b8

    3C2

    c5
    c6
    c7
    c8
    d5
    d6
    d7
    d8

    3A3

    a9
    a10
    a11
    a12
    a13
    a14

    3C3

    c9
    c10
    c11
    c12
    c13
    c14
    d9
    d10
    d11
    d12
    d13
    d14

    stab

    a15
    a16
    c15
    c16
    Offsets relative to median diff (-3)
    3A1
    3C1
    3A2
    3C2
    3A3
    3C3
    stab
    3A1
    3C1
    3A2
    3C2
    3A3
    3C3
    stab

    Left riser

    nom:
    7912.88
    rdg:
    diff:

    Averages of group 3A1

    Formula of calculation:

    sum(a1,a2,a3,a4,b1,b2,b3,b4) / 8

    Statistics of group 3A1

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    a1
    nom:
    7967
    rdg:
    7966
    diff:
    a2
    nom:
    7932
    rdg:
    7929
    diff:
    a3
    nom:
    7914
    rdg:
    7914
    diff:
    a4
    nom:
    7934
    rdg:
    7936
    diff:
    b1
    nom:
    7920
    rdg:
    7925
    diff:
    b2
    nom:
    7882
    rdg:
    7886
    diff:
    b3
    nom:
    7865
    rdg:
    7865
    diff:
    b4
    nom:
    7889
    rdg:
    7891
    diff:
    nom:
    7961.00
    rdg:
    diff:

    Averages of group 3C1

    Formula of calculation:

    sum(c1,c2,c3,c4,d1,d2,d3,d4) / 8

    Statistics of group 3C1

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    c1
    nom:
    7926
    rdg:
    7933
    diff:
    c2
    nom:
    7888
    rdg:
    7890
    diff:
    c3
    nom:
    7867
    rdg:
    7868
    diff:
    c4
    nom:
    7888
    rdg:
    7892
    diff:
    d1
    nom:
    8064
    rdg:
    8055
    diff:
    d2
    nom:
    8032
    rdg:
    8025
    diff:
    d3
    nom:
    8006
    rdg:
    7996
    diff:
    d4
    nom:
    8017
    rdg:
    8010
    diff:
    nom:
    7776.50
    rdg:
    diff:

    Averages of group 3A2

    Formula of calculation:

    sum(a5,a6,a7,a8,b5,b6,b7,b8) / 8

    Statistics of group 3A2

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    a5
    nom:
    7863
    rdg:
    7862
    diff:
    a6
    nom:
    7822
    rdg:
    7821
    diff:
    a7
    nom:
    7752
    rdg:
    7747
    diff:
    a8
    nom:
    7751
    rdg:
    7744
    diff:
    b5
    nom:
    7821
    rdg:
    7824
    diff:
    b6
    nom:
    7778
    rdg:
    7781
    diff:
    b7
    nom:
    7711
    rdg:
    7713
    diff:
    b8
    nom:
    7714
    rdg:
    7713
    diff:
    nom:
    7799.13
    rdg:
    diff:

    Averages of group 3C2

    Formula of calculation:

    sum(c5,c6,c7,c8,d5,d6,d7,d8) / 8

    Statistics of group 3C2

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    c5
    nom:
    7806
    rdg:
    7806
    diff:
    c6
    nom:
    7761
    rdg:
    7765
    diff:
    c7
    nom:
    7695
    rdg:
    7701
    diff:
    c8
    nom:
    7699
    rdg:
    7702
    diff:
    d5
    nom:
    7931
    rdg:
    7918
    diff:
    d6
    nom:
    7888
    rdg:
    7873
    diff:
    d7
    nom:
    7812
    rdg:
    7806
    diff:
    d8
    nom:
    7801
    rdg:
    7797
    diff:
    nom:
    7434.50
    rdg:
    diff:

    Averages of group 3A3

    Formula of calculation:

    sum(a9,a10,a11,a12,a13,a14) / 6

    Statistics of group 3A3

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    a9
    nom:
    7587
    rdg:
    7580
    diff:
    a10
    nom:
    7530
    rdg:
    7521
    diff:
    a11
    nom:
    7394
    rdg:
    7393
    diff:
    a12
    nom:
    7369
    rdg:
    7367
    diff:
    a13
    nom:
    7351
    rdg:
    7340
    diff:
    a14
    nom:
    7376
    rdg:
    7359
    diff:
    nom:
    7470.92
    rdg:
    diff:

    Averages of group 3C3

    Formula of calculation:

    sum(c9,c10,c11,c12,c13,c14,d9,d10,d11,d12,d13,d14) / 12

    Statistics of group 3C3

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    c9
    nom:
    7556
    rdg:
    7549
    diff:
    c10
    nom:
    7499
    rdg:
    7494
    diff:
    c11
    nom:
    7380
    rdg:
    7376
    diff:
    c12
    nom:
    7355
    rdg:
    7350
    diff:
    c13
    nom:
    7346
    rdg:
    7344
    diff:
    c14
    nom:
    7371
    rdg:
    7356
    diff:
    d9
    nom:
    7700
    rdg:
    7693
    diff:
    d10
    nom:
    7643
    rdg:
    7633
    diff:
    d11
    nom:
    7487
    rdg:
    7475
    diff:
    d12
    nom:
    7455
    rdg:
    7447
    diff:
    d13
    nom:
    7424
    rdg:
    7408
    diff:
    d14
    nom:
    7435
    rdg:
    7422
    diff:
    nom:
    7132.50
    rdg:
    diff:

    Averages of group stab

    Formula of calculation:

    sum(a15,a16,c15,c16) / 4

    Statistics of group stab

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    a15
    nom:
    7153
    rdg:
    7128
    diff:
    a16
    nom:
    7100
    rdg:
    7076
    diff:
    c15
    nom:
    7150
    rdg:
    7137
    diff:
    c16
    nom:
    7127
    rdg:
    7105
    diff:

    Right riser

    nom:
    7912.88
    rdg:
    diff:

    Averages of group 3A1

    Formula of calculation:

    sum(a1,a2,a3,a4,b1,b2,b3,b4) / 8

    Statistics of group 3A1

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    a1
    nom:
    7967
    rdg:
    7966
    diff:
    a2
    nom:
    7932
    rdg:
    7929
    diff:
    a3
    nom:
    7914
    rdg:
    7913
    diff:
    a4
    nom:
    7934
    rdg:
    7934
    diff:
    b1
    nom:
    7920
    rdg:
    7917
    diff:
    b2
    nom:
    7882
    rdg:
    7880
    diff:
    b3
    nom:
    7865
    rdg:
    7864
    diff:
    b4
    nom:
    7889
    rdg:
    7889
    diff:
    nom:
    7961.00
    rdg:
    diff:

    Averages of group 3C1

    Formula of calculation:

    sum(c1,c2,c3,c4,d1,d2,d3,d4) / 8

    Statistics of group 3C1

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    c1
    nom:
    7926
    rdg:
    7927
    diff:
    c2
    nom:
    7888
    rdg:
    7896
    diff:
    c3
    nom:
    7867
    rdg:
    7869
    diff:
    c4
    nom:
    7888
    rdg:
    7893
    diff:
    d1
    nom:
    8064
    rdg:
    8055
    diff:
    d2
    nom:
    8032
    rdg:
    8023
    diff:
    d3
    nom:
    8006
    rdg:
    7996
    diff:
    d4
    nom:
    8017
    rdg:
    8006
    diff:
    nom:
    7776.50
    rdg:
    diff:

    Averages of group 3A2

    Formula of calculation:

    sum(a5,a6,a7,a8,b5,b6,b7,b8) / 8

    Statistics of group 3A2

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    a5
    nom:
    7863
    rdg:
    7869
    diff:
    a6
    nom:
    7822
    rdg:
    7825
    diff:
    a7
    nom:
    7752
    rdg:
    7750
    diff:
    a8
    nom:
    7751
    rdg:
    7750
    diff:
    b5
    nom:
    7821
    rdg:
    7825
    diff:
    b6
    nom:
    7778
    rdg:
    7781
    diff:
    b7
    nom:
    7711
    rdg:
    7704
    diff:
    b8
    nom:
    7714
    rdg:
    7717
    diff:
    nom:
    7799.13
    rdg:
    diff:

    Averages of group 3C2

    Formula of calculation:

    sum(c5,c6,c7,c8,d5,d6,d7,d8) / 8

    Statistics of group 3C2

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    c5
    nom:
    7806
    rdg:
    7807
    diff:
    c6
    nom:
    7761
    rdg:
    7768
    diff:
    c7
    nom:
    7695
    rdg:
    7705
    diff:
    c8
    nom:
    7699
    rdg:
    7707
    diff:
    d5
    nom:
    7931
    rdg:
    7922
    diff:
    d6
    nom:
    7888
    rdg:
    7883
    diff:
    d7
    nom:
    7812
    rdg:
    7808
    diff:
    d8
    nom:
    7801
    rdg:
    7797
    diff:
    nom:
    7434.50
    rdg:
    diff:

    Averages of group 3A3

    Formula of calculation:

    sum(a9,a10,a11,a12,a13,a14) / 6

    Statistics of group 3A3

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    a9
    nom:
    7587
    rdg:
    7583
    diff:
    a10
    nom:
    7530
    rdg:
    7532
    diff:
    a11
    nom:
    7394
    rdg:
    7394
    diff:
    a12
    nom:
    7369
    rdg:
    7364
    diff:
    a13
    nom:
    7351
    rdg:
    7347
    diff:
    a14
    nom:
    7376
    rdg:
    7364
    diff:
    nom:
    7470.92
    rdg:
    diff:

    Averages of group 3C3

    Formula of calculation:

    sum(c9,c10,c11,c12,c13,c14,d9,d10,d11,d12,d13,d14) / 12

    Statistics of group 3C3

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    c9
    nom:
    7556
    rdg:
    7557
    diff:
    c10
    nom:
    7499
    rdg:
    7498
    diff:
    c11
    nom:
    7380
    rdg:
    7384
    diff:
    c12
    nom:
    7355
    rdg:
    7359
    diff:
    c13
    nom:
    7346
    rdg:
    7344
    diff:
    c14
    nom:
    7371
    rdg:
    7363
    diff:
    d9
    nom:
    7700
    rdg:
    7692
    diff:
    d10
    nom:
    7643
    rdg:
    7633
    diff:
    d11
    nom:
    7487
    rdg:
    7492
    diff:
    d12
    nom:
    7455
    rdg:
    7453
    diff:
    d13
    nom:
    7424
    rdg:
    7412
    diff:
    d14
    nom:
    7435
    rdg:
    7428
    diff:
    nom:
    7132.50
    rdg:
    diff:

    Averages of group stab

    Formula of calculation:

    sum(a15,a16,c15,c16) / 4

    Statistics of group stab

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    a15
    nom:
    7153
    rdg:
    7141
    diff:
    a16
    nom:
    7100
    rdg:
    7083
    diff:
    c15
    nom:
    7150
    rdg:
    7135
    diff:
    c16
    nom:
    7127
    rdg:
    7110
    diff:

    Continue trimming procedure

    inject html