Result

^{2026-07-16 18:10 UTC}

Niviuk Peak 5 26 (2020)

General Information

Manufacturer	Niviuk Paragliders
Model	Peak 5
Year	2020
Size	26
Production date	2022-01
Line chart	Open
Total airtime	200h
Line set airtime	200h
Tolerance	+/- 10mm (Review)

Data integrity & access	Checksum valid

Settings

Manufacturer tolerance

Correction value

The deviation of the measured values from the nominal values is between 0 and -36mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

3a1

4c1

3a2

4c2

4a3

a10

a11

a12

a13

a14

c13

c14

4c3

c10

c11

c12

3a1

4c1

3a2

4c2

4a3

a10

a11

a12

a13

a14

c13

c14

4c3

c10

c11

c12

Offsets relative to median diff (-16)

3a1

4c1

3a2

4c2

4a3

4c3

3a1

4c1

3a2

4c2

4a3

4c3

Left riser

3a1

nom:

7968.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 3a1

Formula of calculation:

sum(a1,a2,a3,a4,b1,b2,b3,b4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

8067

rdg:

8055

diff:

nom:

7966

rdg:

7955

diff:

nom:

7941

rdg:

7922

diff:

nom:

7977

rdg:

7955

diff:

nom:

8030

rdg:

8022

diff:

nom:

7926

rdg:

7920

diff:

nom:

7901

rdg:

7885

diff:

nom:

7942

rdg:

7922

diff:

4c1

nom:

8013.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 4c1

Formula of calculation:

sum(c1,c2,c3,c4,d1,d2,d3,d4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

8052

rdg:

8043

diff:

nom:

7931

rdg:

7923

diff:

nom:

7909

rdg:

7899

diff:

nom:

7976

rdg:

7963

diff:

nom:

8147

rdg:

8126

diff:

nom:

8027

rdg:

8004

diff:

nom:

8003

rdg:

7977

diff:

nom:

8063

rdg:

8042

diff:

3a2

nom:

7703.63

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 3a2

Formula of calculation:

sum(a5,a6,a7,a8,b5,b6,b7,b8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7874

rdg:

7854

diff:

nom:

7731

rdg:

7712

diff:

nom:

7648

rdg:

7632

diff:

nom:

7627

rdg:

7609

diff:

nom:

7839

rdg:

7827

diff:

nom:

7697

rdg:

7683

diff:

nom:

7615

rdg:

7603

diff:

nom:

7598

rdg:

7580

diff:

4c2

nom:

7747.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 4c2

Formula of calculation:

sum(c5,c6,c7,c8,d5,d6,d7,d8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7843

rdg:

7830

diff:

nom:

7704

rdg:

7691

diff:

nom:

7639

rdg:

7625

diff:

nom:

7671

rdg:

7661

diff:

nom:

7918

rdg:

7898

diff:

nom:

7773

rdg:

7754

diff:

nom:

7702

rdg:

7676

diff:

nom:

7728

rdg:

7706

diff:

4a3

nom:

7293.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 4a3

Formula of calculation:

sum(a9,a10,a11,a12) / 4

4a3 contains suspension points that are excluded from the average:

a13,a14,c13,c14

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7437

rdg:

7422

diff:

a10

nom:

7301

rdg:

7287

diff:

a11

nom:

7216

rdg:

7214

diff:

a12

nom:

7218

rdg:

7200

diff:

a13

nom:

7121

rdg:

7100

diff:

a14

nom:

7108

rdg:

7086

diff:

c13

nom:

7130

rdg:

7118

diff:

c14

nom:

7141

rdg:

7126

diff:

4c3

nom:

7338.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 4c3

Formula of calculation:

sum(c9,c10,c11,c12) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7457

rdg:

7433

diff:

c10

nom:

7319

rdg:

7296

diff:

c11

nom:

7260

rdg:

7236

diff:

c12

nom:

7317

rdg:

7281

diff:

Right riser

3a1

nom:

7968.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 3a1

Formula of calculation:

sum(a1,a2,a3,a4,b1,b2,b3,b4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

8067

rdg:

8048

diff:

nom:

7966

rdg:

7950

diff:

nom:

7941

rdg:

7923

diff:

nom:

7977

rdg:

7959

diff:

nom:

8030

rdg:

8019

diff:

nom:

7926

rdg:

7911

diff:

nom:

7901

rdg:

7884

diff:

nom:

7942

rdg:

7930

diff:

4c1

nom:

8013.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 4c1

Formula of calculation:

sum(c1,c2,c3,c4,d1,d2,d3,d4) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

8052

rdg:

8041

diff:

nom:

7931

rdg:

7927

diff:

nom:

7909

rdg:

7901

diff:

nom:

7976

rdg:

7973

diff:

nom:

8147

rdg:

8130

diff:

nom:

8027

rdg:

8007

diff:

nom:

8003

rdg:

7985

diff:

nom:

8063

rdg:

8048

diff:

3a2

nom:

7703.63

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 3a2

Formula of calculation:

sum(a5,a6,a7,a8,b5,b6,b7,b8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7874

rdg:

7858

diff:

nom:

7731

rdg:

7719

diff:

nom:

7648

rdg:

7632

diff:

nom:

7627

rdg:

7611

diff:

nom:

7839

rdg:

7830

diff:

nom:

7697

rdg:

7689

diff:

nom:

7615

rdg:

7606

diff:

nom:

7598

rdg:

7583

diff:

4c2

nom:

7747.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 4c2

Formula of calculation:

sum(c5,c6,c7,c8,d5,d6,d7,d8) / 8

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7843

rdg:

7822

diff:

nom:

7704

rdg:

7685

diff:

nom:

7639

rdg:

7626

diff:

nom:

7671

rdg:

7662

diff:

nom:

7918

rdg:

7893

diff:

nom:

7773

rdg:

7748

diff:

nom:

7702

rdg:

7684

diff:

nom:

7728

rdg:

7709

diff:

4a3

nom:

7293.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 4a3

Formula of calculation:

sum(a9,a10,a11,a12) / 4

4a3 contains suspension points that are excluded from the average:

a13,a14,c13,c14

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7437

rdg:

7425

diff:

a10

nom:

7301

rdg:

7284

diff:

a11

nom:

7216

rdg:

7205

diff:

a12

nom:

7218

rdg:

7199

diff:

a13

nom:

7121

rdg:

7099

diff:

a14

nom:

7108

rdg:

7092

diff:

c13

nom:

7130

rdg:

7116

diff:

c14

nom:

7141

rdg:

7121

diff:

4c3

nom:

7338.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 4c3

Formula of calculation:

sum(c9,c10,c11,c12) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7457

rdg:

7433

diff:

c10

nom:

7319

rdg:

7295

diff:

c11

nom:

7260

rdg:

7235

diff:

c12

nom:

7317

rdg:

7281

diff:

Help

AoI

The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.

ref

The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:

groups and rows	Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points	Clicking the white area beneath the suspension point name

nom

The nominal length between suspension point and main riser loop.

rdg

The actual reading from your measurement device. When measuring, rdg is the input field.

diff

The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.

colors

Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.

status

Color coded dots are shown for manual, imported & laser values

Also take a look at the Manual

Continue trimming procedure

inject html