Help

AoI

The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.

ref

The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:

groups and rows	Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points	Clicking the white area beneath the suspension point name

nom

The nominal length between suspension point and main riser loop.

rdg

The actual reading from your measurement device. When measuring, rdg is the input field.

diff

The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.

colors

Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.

status

Color coded dots are shown for manual, imported & laser values

Also take a look at the Manual

Result

^{…
2026-05-14 22:39 UTC

2026-05-14 21:10 UTC}

Nova Mentor 5 XS (2017)

General Information

Manufacturer	NOVA Vertriebsgesellschaft m.b.H.
Model	Mentor 5
Year	2017
Size	XS
Production date	2017-11
Line chart	Open
Total airtime	80h
Line set airtime	80h
Tolerance	+/- 10mm (Review)

Data integrity & access	Checksum valid

Settings

Manufacturer tolerance

Correction value

The deviation of the measured values from the nominal values is between -444 and -470mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

A1

AG1

AG2

B1

BG1

BG2

C1

CG1

CG2

DG1

DG2

A2

AG3

AG4

B2

BG3

BG4

C2

CG3

CG4

DG3

DG4

A3

AG5

AG6

AG7

AG8

AG9

AG10

B3

BG5

BG6

BG7

BG8

BG9

BG10

C3

CG5

CG6

CG7

CG8

CG9

CG10

DG5

S

SAG1

SAG2

SG1

SBG1

SBG2

SG2

SG3

SG4

A1

AG1

AG2

B1

BG1

BG2

C1

CG1

CG2

DG1

DG2

A2

AG3

AG4

B2

BG3

BG4

C2

CG3

CG4

DG3

DG4

A3

AG5

AG6

AG7

AG8

AG9

AG10

B3

BG5

BG6

BG7

BG8

BG9

BG10

C3

CG5

CG6

CG7

CG8

CG9

CG10

DG5

S

SAG1

SAG2

SG1

SBG1

SBG2

SG2

SG3

SG4

Offsets relative to median diff (-453)

Left riser

nom:

6669.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A1

Formula of calculation:

sum(AG1,AG2) / 2

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG1

nom:

6685

rdg:

6231

diff:

AG2

nom:

6654

rdg:

6198

diff:

nom:

6586.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B1

Formula of calculation:

sum(BG1,BG2) / 2

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG1

nom:

6601

rdg:

6139

diff:

BG2

nom:

6572

rdg:

6110

diff:

nom:

6752.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group C1

Formula of calculation:

sum(CG1,CG2,DG1,DG2) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

CG1

nom:

6706

rdg:

6248

diff:

CG2

nom:

6675

rdg:

6213

diff:

DG1

nom:

6830

rdg:

6376

diff:

DG2

nom:

6799

rdg:

6348

diff:

nom:

6602.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A2

Formula of calculation:

sum(AG3,AG4) / 2

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG3

nom:

6616

rdg:

6162

diff:

AG4

nom:

6589

rdg:

6140

diff:

nom:

6527.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B2

Formula of calculation:

sum(BG3,BG4) / 2

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG3

nom:

6538

rdg:

6084

diff:

BG4

nom:

6517

rdg:

6067

diff:

nom:

6681.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group C2

Formula of calculation:

sum(CG3,CG4,DG3,DG4) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

CG3

nom:

6638

rdg:

6178

diff:

CG4

nom:

6610

rdg:

6157

diff:

DG3

nom:

6757

rdg:

6306

diff:

DG4

nom:

6720

rdg:

6272

diff:

nom:

6402.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A3

Formula of calculation:

sum(AG5,AG6,AG7,AG8,AG9,AG10) / 6

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG5

nom:

6563

rdg:

6109

diff:

AG6

nom:

6517

rdg:

6072

diff:

AG7

nom:

6398

rdg:

5952

diff:

AG8

nom:

6372

rdg:

5928

diff:

AG9

nom:

6291

rdg:

5838

diff:

AG10

nom:

6274

rdg:

5826

diff:

nom:

6342.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B3

Formula of calculation:

sum(BG5,BG6,BG7,BG8,BG9,BG10) / 6

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG5

nom:

6495

rdg:

6044

diff:

BG6

nom:

6452

rdg:

6000

diff:

BG7

nom:

6337

rdg:

5891

diff:

BG8

nom:

6312

rdg:

5868

diff:

BG9

nom:

6238

rdg:

5787

diff:

BG10

nom:

6222

rdg:

5774

diff:

nom:

6486.43

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group C3

Formula of calculation:

sum(CG5,CG6,CG7,CG8,CG9,CG10,DG5) / 7

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

CG5

nom:

6649

rdg:

6198

diff:

CG6

nom:

6555

rdg:

6110

diff:

CG7

nom:

6396

rdg:

5944

diff:

CG8

nom:

6388

rdg:

5938

diff:

CG9

nom:

6438

rdg:

5989

diff:

CG10

nom:

6483

rdg:

6027

diff:

DG5

nom:

6496

rdg:

6046

diff:

nom:

5889.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group S

Formula of calculation:

sum(SAG1,SAG2,SG1,SBG1,SBG2,SG2,SG3,SG4) / 8

Statistics of "04"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

SAG1

nom:

5982

rdg:

5525

diff:

SAG2

nom:

5907

rdg:

5452

diff:

SG1

nom:

5764

rdg:

5306

diff:

SBG1

nom:

6003

rdg:

5538

diff:

SBG2

nom:

5931

rdg:

5470

diff:

SG2

nom:

5768

rdg:

5312

diff:

SG3

nom:

5810

rdg:

5358

diff:

SG4

nom:

5947

rdg:

5489

diff:

Right riser

nom:

6669.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A1

Formula of calculation:

sum(AG1,AG2) / 2

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG1

nom:

6685

rdg:

6227

diff:

AG2

nom:

6654

rdg:

6193

diff:

nom:

6586.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B1

Formula of calculation:

sum(BG1,BG2) / 2

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG1

nom:

6601

rdg:

6138

diff:

BG2

nom:

6572

rdg:

6113

diff:

nom:

6752.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group C1

Formula of calculation:

sum(CG1,CG2,DG1,DG2) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

CG1

nom:

6706

rdg:

6246

diff:

CG2

nom:

6675

rdg:

6216

diff:

DG1

nom:

6830

rdg:

6374

diff:

DG2

nom:

6799

rdg:

6346

diff:

nom:

6602.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A2

Formula of calculation:

sum(AG3,AG4) / 2

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG3

nom:

6616

rdg:

6161

diff:

AG4

nom:

6589

rdg:

6136

diff:

nom:

6527.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B2

Formula of calculation:

sum(BG3,BG4) / 2

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG3

nom:

6538

rdg:

6084

diff:

BG4

nom:

6517

rdg:

6065

diff:

nom:

6681.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group C2

Formula of calculation:

sum(CG3,CG4,DG3,DG4) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

CG3

nom:

6638

rdg:

6178

diff:

CG4

nom:

6610

rdg:

6152

diff:

DG3

nom:

6757

rdg:

6308

diff:

DG4

nom:

6720

rdg:

6272

diff:

nom:

6402.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A3

Formula of calculation:

sum(AG5,AG6,AG7,AG8,AG9,AG10) / 6

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG5

nom:

6563

rdg:

6117

diff:

AG6

nom:

6517

rdg:

6069

diff:

AG7

nom:

6398

rdg:

5950

diff:

AG8

nom:

6372

rdg:

5921

diff:

AG9

nom:

6291

rdg:

5843

diff:

AG10

nom:

6274

rdg:

5817

diff:

nom:

6342.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B3

Formula of calculation:

sum(BG5,BG6,BG7,BG8,BG9,BG10) / 6

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG5

nom:

6495

rdg:

6043

diff:

BG6

nom:

6452

rdg:

6001

diff:

BG7

nom:

6337

rdg:

5883

diff:

BG8

nom:

6312

rdg:

5860

diff:

BG9

nom:

6238

rdg:

5788

diff:

BG10

nom:

6222

rdg:

5769

diff:

nom:

6486.43

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group C3

Formula of calculation:

sum(CG5,CG6,CG7,CG8,CG9,CG10,DG5) / 7

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

CG5

nom:

6649

rdg:

6199

diff:

CG6

nom:

6555

rdg:

6110

diff:

CG7

nom:

6396

rdg:

5945

diff:

CG8

nom:

6388

rdg:

5943

diff:

CG9

nom:

6438

rdg:

5991

diff:

CG10

nom:

6483

rdg:

6022

diff:

DG5

nom:

6496

rdg:

6047

diff:

nom:

5889.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group S

Formula of calculation:

sum(SAG1,SAG2,SG1,SBG1,SBG2,SG2,SG3,SG4) / 8

Statistics of "04"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

SAG1

nom:

5982

rdg:

5518

diff:

SAG2

nom:

5907

rdg:

5449

diff:

SG1

nom:

5764

rdg:

5303

diff:

SBG1

nom:

6003

rdg:

5533

diff:

SBG2

nom:

5931

rdg:

5467

diff:

SG2

nom:

5768

rdg:

5307

diff:

SG3

nom:

5810

rdg:

5353

diff:

SG4

nom:

5947

rdg:

5488

diff:

Continue trimming procedure

inject html