Result

^{2025-02-15 15:39 UTC

2025-02-15 10:35 UTC
…}

Nova Mentor 6 Light M (2019)

General Information

Manufacturer	NOVA Vertriebsgesellschaft m.b.H.
Model	Mentor 6 Light
Year	2019
Size	M
Production date	2019-07
Line chart	Open
Total airtime	120h
Line set airtime	120h
Tolerance	+/- 10mm (Review)

Data integrity & access	Checksum valid

Settings

Manufacturer tolerance

Correction value

The deviation of the measured values from the nominal values is between 0 and -7mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

A1

AG1

AG2

B1

BG1

BG2

BG1.2

BG2.2

C1

CG1

CG2

DG1

DG2

A2

AG3

AG4

B2

BG3

BG4

BG3.2

BG4.2

C2

CG3

CG4

A3

AG5

AG6

AG7

AG8

AG9

AG10

BR3

BG5

BG6

BG7

BG8

BG9

BG10

C3

CG5

CG6

CG7

CG8

CG9

CG10

S

SAG1

SAG2

SG1

SBG1

SBG2

SG2

SCG1

SCG2

SG3

SG4

A1

AG1

AG2

B1

BG1

BG2

BG1.2

BG2.2

C1

CG1

CG2

DG1

DG2

A2

AG3

AG4

B2

BG3

BG4

BG3.2

BG4.2

C2

CG3

CG4

A3

AG5

AG6

AG7

AG8

AG9

AG10

BR3

BG5

BG6

BG7

BG8

BG9

BG10

C3

CG5

CG6

CG7

CG8

CG9

CG10

S

SAG1

SAG2

SG1

SBG1

SBG2

SG2

SCG1

SCG2

SG3

SG4

Offsets relative to median diff (-1)

BR3

Left riser

nom:

7252.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A1

Formula of calculation:

sum(AG1,AG2) / 2

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG1

nom:

7267

rdg:

7267

diff:

AG2

nom:

7237

rdg:

7238

diff:

nom:

7157.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B1

Formula of calculation:

sum(BG1,BG2,BG1.2,BG2.2) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG1

nom:

7172

rdg:

7166

diff:

BG2

nom:

7142

rdg:

7138

diff:

BG1.2

nom:

7172

rdg:

7173

diff:

BG2.2

nom:

7142

rdg:

7139

diff:

nom:

7351.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group C1

Formula of calculation:

sum(CG1,CG2,DG1,DG2) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

CG1

nom:

7273

rdg:

7274

diff:

CG2

nom:

7242

rdg:

7244

diff:

DG1

nom:

7462

rdg:

7462

diff:

DG2

nom:

7429

rdg:

7430

diff:

nom:

7193.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

2025-02-15 15:39Corrected input (Pile Hitch Plus is correct)

Averages of group A2

Formula of calculation:

sum(AG3,AG4) / 2

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG3

nom:

7207

rdg:

7204

diff:

AG4

nom:

7180

rdg:

7179

diff:

nom:

7101.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

2025-02-15 15:39Corrected input

Averages of group B2

Formula of calculation:

sum(BG3,BG4,BG3.2,BG4.2) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG3

nom:

7114

rdg:

7112

diff:

BG4

nom:

7088

rdg:

7089

diff:

BG3.2

nom:

7114

rdg:

7113

diff:

BG4.2

nom:

7089

rdg:

7090

diff:

nom:

7194.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group C2

Formula of calculation:

sum(CG3,CG4) / 2

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

CG3

nom:

7210

rdg:

7209

diff:

CG4

nom:

7178

rdg:

7178

diff:

nom:

6989.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A3

Formula of calculation:

sum(AG5,AG6,AG7,AG8,AG9,AG10) / 6

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG5

nom:

7158

rdg:

7160

diff:

AG6

nom:

7105

rdg:

7105

diff:

AG7

nom:

6980

rdg:

6981

diff:

AG8

nom:

6953

rdg:

6955

diff:

AG9

nom:

6875

rdg:

6872

diff:

AG10

nom:

6863

rdg:

6858

diff:

BR3

nom:

6923.83

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR3

Formula of calculation:

sum(BG5,BG6,BG7,BG8,BG9,BG10) / 6

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG5

nom:

7084

rdg:

7082

diff:

BG6

nom:

7035

rdg:

7031

diff:

BG7

nom:

6915

rdg:

6919

diff:

BG8

nom:

6893

rdg:

6898

diff:

BG9

nom:

6815

rdg:

6812

diff:

BG10

nom:

6801

rdg:

6797

diff:

nom:

6980.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group C3

Formula of calculation:

sum(CG5,CG6,CG7,CG8,CG9,CG10) / 6

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

CG5

nom:

7158

rdg:

7155

diff:

CG6

nom:

7104

rdg:

7099

diff:

CG7

nom:

6977

rdg:

6971

diff:

CG8

nom:

6950

rdg:

6943

diff:

CG9

nom:

6859

rdg:

6859

diff:

CG10

nom:

6836

rdg:

6831

diff:

nom:

6447.20

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group S

Formula of calculation:

sum(SAG1,SAG2,SG1,SBG1,SBG2,SG2,SCG1,SCG2,SG3,SG4) / 10

Statistics of "04"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

SAG1

nom:

6508

rdg:

6509

diff:

SAG2

nom:

6440

rdg:

6440

diff:

SG1

nom:

6301

rdg:

6303

diff:

SBG1

nom:

6518

rdg:

6517

diff:

SBG2

nom:

6447

rdg:

6448

diff:

SG2

nom:

6321

rdg:

6323

diff:

SCG1

nom:

6597

rdg:

6597

diff:

SCG2

nom:

6519

rdg:

6523

diff:

SG3

nom:

6367

rdg:

6371

diff:

SG4

nom:

6454

rdg:

6454

diff:

Right riser

nom:

7252.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A1

Formula of calculation:

sum(AG1,AG2) / 2

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG1

nom:

7267

rdg:

7270

diff:

AG2

nom:

7237

rdg:

7236

diff:

nom:

7157.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B1

Formula of calculation:

sum(BG1,BG2,BG1.2,BG2.2) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG1

nom:

7172

rdg:

7172

diff:

BG2

nom:

7142

rdg:

7142

diff:

BG1.2

nom:

7172

rdg:

7171

diff:

BG2.2

nom:

7142

rdg:

7142

diff:

nom:

7351.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group C1

Formula of calculation:

sum(CG1,CG2,DG1,DG2) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

CG1

nom:

7273

rdg:

7269

diff:

CG2

nom:

7242

rdg:

7241

diff:

DG1

nom:

7462

rdg:

7456

diff:

DG2

nom:

7429

rdg:

7423

diff:

nom:

7193.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A2

Formula of calculation:

sum(AG3,AG4) / 2

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG3

nom:

7207

rdg:

7205

diff:

AG4

nom:

7180

rdg:

7183

diff:

nom:

7101.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B2

Formula of calculation:

sum(BG3,BG4,BG3.2,BG4.2) / 4

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG3

nom:

7114

rdg:

7115

diff:

BG4

nom:

7088

rdg:

7089

diff:

BG3.2

nom:

7114

rdg:

7116

diff:

BG4.2

nom:

7089

rdg:

7088

diff:

nom:

7194.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group C2

Formula of calculation:

sum(CG3,CG4) / 2

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

CG3

nom:

7210

rdg:

7212

diff:

CG4

nom:

7178

rdg:

7182

diff:

nom:

6989.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A3

Formula of calculation:

sum(AG5,AG6,AG7,AG8,AG9,AG10) / 6

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG5

nom:

7158

rdg:

7161

diff:

AG6

nom:

7105

rdg:

7107

diff:

AG7

nom:

6980

rdg:

6980

diff:

AG8

nom:

6953

rdg:

6953

diff:

AG9

nom:

6875

rdg:

6875

diff:

AG10

nom:

6863

rdg:

6862

diff:

BR3

nom:

6923.83

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR3

Formula of calculation:

sum(BG5,BG6,BG7,BG8,BG9,BG10) / 6

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG5

nom:

7084

rdg:

7081

diff:

BG6

nom:

7035

rdg:

7030

diff:

BG7

nom:

6915

rdg:

6911

diff:

BG8

nom:

6893

rdg:

6889

diff:

BG9

nom:

6815

rdg:

6815

diff:

BG10

nom:

6801

rdg:

6798

diff:

nom:

6980.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

2025-02-15 15:39Corrected input

Averages of group C3

Formula of calculation:

sum(CG5,CG6,CG7,CG8,CG9,CG10) / 6

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

CG5

nom:

7158

rdg:

7159

diff:

CG6

nom:

7104

rdg:

7108

diff:

CG7

nom:

6977

rdg:

6975

diff:

CG8

nom:

6950

rdg:

6947

diff:

CG9

nom:

6859

rdg:

6855

diff:

CG10

nom:

6836

rdg:

6834

diff:

nom:

6447.20

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group S

Formula of calculation:

sum(SAG1,SAG2,SG1,SBG1,SBG2,SG2,SCG1,SCG2,SG3,SG4) / 10

Statistics of "04"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

SAG1

nom:

6508

rdg:

6509

diff:

SAG2

nom:

6440

rdg:

6438

diff:

SG1

nom:

6301

rdg:

6299

diff:

SBG1

nom:

6518

rdg:

6516

diff:

SBG2

nom:

6447

rdg:

6452

diff:

SG2

nom:

6321

rdg:

6316

diff:

SCG1

nom:

6597

rdg:

6592

diff:

SCG2

nom:

6519

rdg:

6517

diff:

SG3

nom:

6367

rdg:

6364

diff:

SG4

nom:

6454

rdg:

6450

diff:

Help

AoI

The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.

ref

The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:

groups and rows	Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points	Clicking the white area beneath the suspension point name

nom

The nominal length between suspension point and main riser loop.

rdg

The actual reading from your measurement device. When measuring, rdg is the input field.

diff

The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.

colors

Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.

status

Color coded dots are shown for manual, imported & laser values

Also take a look at the Manual

Continue trimming procedure

inject html