Result

2025-12-22 17:15 UTC

Nova Vortex XS (2025)

General Information
ManufacturerNOVA Vertriebsgesellschaft m.b.H.
ModelVortex
Year2025
SizeXS
Production date2025-09
Line chartOpen
Total airtime15h
Line set airtime15h
Tolerance +/- 10mm (Review)

Settings

The deviation of the measured values from the nominal values is between -15 and -36mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

A1

AG1
AG2
AG3
AG4
AAG1
AAG2
AAG3
AAG4

B1

BG1
BG2
BG3
BG4
CG1
CG2
CG3
CG4

A2

AG5
AG6
AG7
AG8
AAG5
AAG6
AAG7
AAG8

B2

BG5
BG6
BG7
BG8
CG5
CG6
CG7
CG8

S-A3

AG9
AG10
AG11
AG12
AG13
AG14
SAG1
SAG2
SG1
SBG1
SBG2
SG2
SCG1
SCG2
SG3

B3

BG9
BG10
BG11
BG12
BG13
BG14

Brake

FG1
FG2
FG3
FG4
FG5
FG6
FG7
FG8
FG9
FG10
FG11
FG12

A1

AG1
AG2
AG3
AG4
AAG1
AAG2
AAG3
AAG4

B1

BG1
BG2
BG3
BG4
CG1
CG2
CG3
CG4

A2

AG5
AG6
AG7
AG8
AAG5
AAG6
AAG7
AAG8

B2

BG5
BG6
BG7
BG8
CG5
CG6
CG7
CG8

S-A3

AG9
AG10
AG11
AG12
AG13
AG14
SAG1
SAG2
SG1
SBG1
SBG2
SG2
SCG1
SCG2
SG3

B3

BG9
BG10
BG11
BG12
BG13
BG14

Brake

FG1
FG2
FG3
FG4
FG5
FG6
FG7
FG8
FG9
FG10
FG11
FG12
Offsets relative to median diff (-26)
A1
B1
A2
B2
S-A3
B3
A1
B1
A2
B2
S-A3
B3

Left riser

nom:
7094.75
rdg:
diff:

Averages of group A1

Formula of calculation:

sum(AG1,AG2,AG3,AG4,AAG1,AAG2,AAG3,AAG4) / 8

Statistics of "54-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG1
nom:
7144
rdg:
7121
diff:
AG2
nom:
7098
rdg:
7071
diff:
AG3
nom:
7067
rdg:
7039
diff:
AG4
nom:
7094
rdg:
7065
diff:
AAG1
nom:
7132
rdg:
7106
diff:
AAG2
nom:
7085
rdg:
7057
diff:
AAG3
nom:
7054
rdg:
7028
diff:
AAG4
nom:
7084
rdg:
7056
diff:
nom:
7134.88
rdg:
diff:

Averages of group B1

Formula of calculation:

sum(BG1,BG2,BG3,BG4,CG1,CG2,CG3,CG4) / 8

Statistics of "51-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG1
nom:
7094
rdg:
7071
diff:
BG2
nom:
7046
rdg:
7019
diff:
BG3
nom:
7025
rdg:
7005
diff:
BG4
nom:
7057
rdg:
7033
diff:
CG1
nom:
7246
rdg:
7223
diff:
CG2
nom:
7210
rdg:
7184
diff:
CG3
nom:
7190
rdg:
7166
diff:
CG4
nom:
7211
rdg:
7185
diff:
nom:
6978.38
rdg:
diff:

Averages of group A2

Formula of calculation:

sum(AG5,AG6,AG7,AG8,AAG5,AAG6,AAG7,AAG8) / 8

Statistics of "54-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG5
nom:
7039
rdg:
7015
diff:
AG6
nom:
6993
rdg:
6963
diff:
AG7
nom:
6942
rdg:
6914
diff:
AG8
nom:
6961
rdg:
6929
diff:
AAG5
nom:
7027
rdg:
7001
diff:
AAG6
nom:
6981
rdg:
6951
diff:
AAG7
nom:
6931
rdg:
6903
diff:
AAG8
nom:
6953
rdg:
6922
diff:
nom:
7015.38
rdg:
diff:

Averages of group B2

Formula of calculation:

sum(BG5,BG6,BG7,BG8,CG5,CG6,CG7,CG8) / 8

Statistics of "51-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG5
nom:
6997
rdg:
6980
diff:
BG6
nom:
6942
rdg:
6926
diff:
BG7
nom:
6900
rdg:
6880
diff:
BG8
nom:
6908
rdg:
6885
diff:
CG5
nom:
7149
rdg:
7126
diff:
CG6
nom:
7108
rdg:
7088
diff:
CG7
nom:
7058
rdg:
7032
diff:
CG8
nom:
7061
rdg:
7038
diff:
nom:
6701.83
rdg:
diff:

Averages of group S-A3

Formula of calculation:

sum(AG9,AG10,AG11,AG12,AG13,AG14) / 6

S-A3 contains suspension points that are excluded from the average:

SAG1,SAG2,SG1,SBG1,SBG2,SG2,SCG1,SCG2,SG3

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "51-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG9
nom:
6886
rdg:
6855
diff:
AG10
nom:
6817
rdg:
6788
diff:
AG11
nom:
6678
rdg:
6642
diff:
AG12
nom:
6672
rdg:
6640
diff:
AG13
nom:
6578
rdg:
6546
diff:
AG14
nom:
6580
rdg:
6552
diff:
SAG1
nom:
6351
rdg:
6320
diff:
SAG2
nom:
6318
rdg:
6290
diff:
SG1
nom:
6292
rdg:
6264
diff:
 
 
 
 
 
 
SBG1
nom:
6351
rdg:
6318
diff:
SBG2
nom:
6320
rdg:
6287
diff:
SG2
nom:
6307
rdg:
6278
diff:
 
 
 
 
 
 
SCG1
nom:
6380
rdg:
6347
diff:
SCG2
nom:
6348
rdg:
6319
diff:
SG3
nom:
6332
rdg:
6303
diff:
nom:
6672.00
rdg:
diff:

Averages of group B3

Formula of calculation:

sum(BG9,BG10,BG11,BG12,BG13,BG14) / 6

Statistics of "51-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG9
nom:
6805
rdg:
6789
diff:
BG10
nom:
6744
rdg:
6729
diff:
BG11
nom:
6644
rdg:
6624
diff:
BG12
nom:
6652
rdg:
6630
diff:
BG13
nom:
6580
rdg:
6557
diff:
BG14
nom:
6607
rdg:
6584
diff:

Left brake

nom:
6767.42
rdg:
diff:

Averages of group Brake

Formula of calculation:

sum(FG1,FG2,FG3,FG4,FG5,FG6,FG7,FG8,FG9,FG10,FG11,FG12) / 12
FG1
nom:
7344
rdg:
7384
diff:
FG2
nom:
7118
rdg:
7160
diff:
FG3
nom:
6984
rdg:
7025
diff:
FG4
nom:
7018
rdg:
7065
diff:
FG5
nom:
6999
rdg:
7042
diff:
FG6
nom:
6819
rdg:
6870
diff:
FG7
nom:
6612
rdg:
6659
diff:
FG8
nom:
6615
rdg:
6666
diff:
FG9
nom:
6440
rdg:
6497
diff:
FG10
nom:
6424
rdg:
6468
diff:
FG11
nom:
6373
rdg:
6418
diff:
FG12
nom:
6463
rdg:
6515
diff:

Right riser

nom:
7094.75
rdg:
diff:

Averages of group A1

Formula of calculation:

sum(AG1,AG2,AG3,AG4,AAG1,AAG2,AAG3,AAG4) / 8

Statistics of "54-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG1
nom:
7144
rdg:
7119
diff:
AG2
nom:
7098
rdg:
7070
diff:
AG3
nom:
7067
rdg:
7041
diff:
AG4
nom:
7094
rdg:
7067
diff:
AAG1
nom:
7132
rdg:
7105
diff:
AAG2
nom:
7085
rdg:
7058
diff:
AAG3
nom:
7054
rdg:
7027
diff:
AAG4
nom:
7084
rdg:
7056
diff:
nom:
7134.88
rdg:
diff:

Averages of group B1

Formula of calculation:

sum(BG1,BG2,BG3,BG4,CG1,CG2,CG3,CG4) / 8

Statistics of "51-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG1
nom:
7094
rdg:
7070
diff:
BG2
nom:
7046
rdg:
7021
diff:
BG3
nom:
7025
rdg:
7004
diff:
BG4
nom:
7057
rdg:
7034
diff:
CG1
nom:
7246
rdg:
7221
diff:
CG2
nom:
7210
rdg:
7188
diff:
CG3
nom:
7190
rdg:
7167
diff:
CG4
nom:
7211
rdg:
7186
diff:
nom:
6978.38
rdg:
diff:

Averages of group A2

Formula of calculation:

sum(AG5,AG6,AG7,AG8,AAG5,AAG6,AAG7,AAG8) / 8

Statistics of "54-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG5
nom:
7039
rdg:
7013
diff:
AG6
nom:
6993
rdg:
6964
diff:
AG7
nom:
6942
rdg:
6916
diff:
AG8
nom:
6961
rdg:
6933
diff:
AAG5
nom:
7027
rdg:
7003
diff:
AAG6
nom:
6981
rdg:
6953
diff:
AAG7
nom:
6931
rdg:
6906
diff:
AAG8
nom:
6953
rdg:
6926
diff:
nom:
7015.38
rdg:
diff:

Averages of group B2

Formula of calculation:

sum(BG5,BG6,BG7,BG8,CG5,CG6,CG7,CG8) / 8

Statistics of "51-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG5
nom:
6997
rdg:
6975
diff:
BG6
nom:
6942
rdg:
6924
diff:
BG7
nom:
6900
rdg:
6876
diff:
BG8
nom:
6908
rdg:
6883
diff:
CG5
nom:
7149
rdg:
7124
diff:
CG6
nom:
7108
rdg:
7087
diff:
CG7
nom:
7058
rdg:
7035
diff:
CG8
nom:
7061
rdg:
7038
diff:
nom:
6701.83
rdg:
diff:

Averages of group S-A3

Formula of calculation:

sum(AG9,AG10,AG11,AG12,AG13,AG14) / 6

S-A3 contains suspension points that are excluded from the average:

SAG1,SAG2,SG1,SBG1,SBG2,SG2,SCG1,SCG2,SG3

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "51-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG9
nom:
6886
rdg:
6868
diff:
AG10
nom:
6817
rdg:
6800
diff:
AG11
nom:
6678
rdg:
6657
diff:
AG12
nom:
6672
rdg:
6651
diff:
AG13
nom:
6578
rdg:
6548
diff:
AG14
nom:
6580
rdg:
6553
diff:
SAG1
nom:
6351
rdg:
6325
diff:
SAG2
nom:
6318
rdg:
6293
diff:
SG1
nom:
6292
rdg:
6266
diff:
 
 
 
 
 
 
SBG1
nom:
6351
rdg:
6328
diff:
SBG2
nom:
6320
rdg:
6295
diff:
SG2
nom:
6307
rdg:
6286
diff:
 
 
 
 
 
 
SCG1
nom:
6380
rdg:
6352
diff:
SCG2
nom:
6348
rdg:
6322
diff:
SG3
nom:
6332
rdg:
6307
diff:
nom:
6672.00
rdg:
diff:

Averages of group B3

Formula of calculation:

sum(BG9,BG10,BG11,BG12,BG13,BG14) / 6

Statistics of "51-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG9
nom:
6805
rdg:
6785
diff:
BG10
nom:
6744
rdg:
6725
diff:
BG11
nom:
6644
rdg:
6617
diff:
BG12
nom:
6652
rdg:
6627
diff:
BG13
nom:
6580
rdg:
6556
diff:
BG14
nom:
6607
rdg:
6581
diff:

Right brake

nom:
6767.42
rdg:
diff:

Averages of group Brake

Formula of calculation:

sum(FG1,FG2,FG3,FG4,FG5,FG6,FG7,FG8,FG9,FG10,FG11,FG12) / 12
FG1
nom:
7344
rdg:
7389
diff:
FG2
nom:
7118
rdg:
7161
diff:
FG3
nom:
6984
rdg:
7030
diff:
FG4
nom:
7018
rdg:
7060
diff:
FG5
nom:
6999
rdg:
7045
diff:
FG6
nom:
6819
rdg:
6872
diff:
FG7
nom:
6612
rdg:
6663
diff:
FG8
nom:
6615
rdg:
6666
diff:
FG9
nom:
6440
rdg:
6487
diff:
FG10
nom:
6424
rdg:
6471
diff:
FG11
nom:
6373
rdg:
6423
diff:
FG12
nom:
6463
rdg:
6515
diff:
 Help
AoI The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.
ref The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:
groups and rows Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points Clicking the white area beneath the suspension point name
nom The nominal length between suspension point and main riser loop.
rdg The actual reading from your measurement device. When measuring, rdg is the input field.
diff The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.
colors Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.
status Color coded dots are shown for manual, imported & laser values
Also take a look at the Manual

Continue trimming procedure

inject html