Result

^{2026-10-03 14:02 UTC}

Nova Xenon 3 S (2026)

General Information

Manufacturer	NOVA Vertriebsgesellschaft m.b.H.
Model	Xenon 3
Year	2026
Size	S
Production date	2026-09
Line chart	Open
Total airtime	12h
Line set airtime	12h
Tolerance	+/- 10mm (Review)

Data integrity & access	Checksum valid

Settings

Manufacturer tolerance

Correction value

The deviation of the measured values from the nominal values is between 0 and 30mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

A1

AG1

AG2

AG3

AG4

AAG1

AAG2

AAG3

AAG4

B1

BG1

BG2

BG3

BG4

CG1

CG2

CG3

CG4

A2

AG5

AG6

AG7

AG8

AAG5

AAG6

AAG7

AAG8

B2

BG5

BG6

BG7

BG8

CG5

CG6

CG7

CG8

S-A3

AG9

AG10

AG11

B3

BG9

BG10

BG11

S-A3

SAG

SBG

F

FG1

FG2

FG3

FG4

FG5

FG6

FG7

FG8

FG9

FG10

FG11

FG12

FG13

A1

AG1

AG2

AG3

AG4

AAG1

AAG2

AAG3

AAG4

B1

BG1

BG2

BG3

BG4

CG1

CG2

CG3

CG4

A2

AG5

AG6

AG7

AG8

AAG5

AAG6

AAG7

AAG8

B2

BG5

BG6

BG7

BG8

CG5

CG6

CG7

CG8

S-A3

AG9

AG10

AG11

B3

BG9

BG10

BG11

S-A3

SAG

SBG

F

FG1

FG2

FG3

FG4

FG5

FG6

FG7

FG8

FG9

FG10

FG11

FG12

FG13

Offsets relative to median diff (14)

S-A3

Left riser

nom:

7350.38

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A1

Formula of calculation:

sum(AG1,AG2,AG3,AG4,AAG1,AAG2,AAG3,AAG4) / 8

Statistics of "55-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG1

nom:

7456

rdg:

7477

diff:

AG2

nom:

7329

rdg:

7356

diff:

AG3

nom:

7293

rdg:

7323

diff:

AG4

nom:

7348

rdg:

7372

diff:

AAG1

nom:

7446

rdg:

7466

diff:

AAG2

nom:

7315

rdg:

7341

diff:

AAG3

nom:

7279

rdg:

7307

diff:

AAG4

nom:

7337

rdg:

7360

diff:

nom:

7370.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B1

Formula of calculation:

sum(BG1,BG2,BG3,BG4,CG1,CG2,CG3,CG4) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG1

nom:

7411

rdg:

7418

diff:

BG2

nom:

7286

rdg:

7300

diff:

BG3

nom:

7250

rdg:

7268

diff:

BG4

nom:

7301

rdg:

7315

diff:

CG1

nom:

7531

rdg:

7530

diff:

CG2

nom:

7408

rdg:

7412

diff:

CG3

nom:

7368

rdg:

7377

diff:

CG4

nom:

7411

rdg:

7415

diff:

nom:

7119.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A2

Formula of calculation:

sum(AG5,AG6,AG7,AG8,AAG5,AAG6,AAG7,AAG8) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG5

nom:

7261

rdg:

7287

diff:

AG6

nom:

7126

rdg:

7153

diff:

AG7

nom:

7058

rdg:

7074

diff:

AG8

nom:

7058

rdg:

7075

diff:

AAG5

nom:

7248

rdg:

7270

diff:

AAG6

nom:

7115

rdg:

7139

diff:

AAG7

nom:

7047

rdg:

7062

diff:

AAG8

nom:

7045

rdg:

7058

diff:

nom:

7137.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B2

Formula of calculation:

sum(BG5,BG6,BG7,BG8,CG5,CG6,CG7,CG8) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG5

nom:

7225

rdg:

7243

diff:

BG6

nom:

7080

rdg:

7093

diff:

BG7

nom:

7018

rdg:

7027

diff:

BG8

nom:

7047

rdg:

7060

diff:

CG5

nom:

7328

rdg:

7339

diff:

CG6

nom:

7177

rdg:

7191

diff:

CG7

nom:

7106

rdg:

7119

diff:

CG8

nom:

7122

rdg:

7137

diff:

S-A3

nom:

6776.33

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group S-A3

Formula of calculation:

sum(AG9,AG10,AG11) / 3

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG9

nom:

6863

rdg:

6854

diff:

AG10

nom:

6753

rdg:

6746

diff:

AG11

nom:

6713

rdg:

6707

diff:

nom:

6765.33

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B3

Formula of calculation:

sum(BG9,BG10,BG11) / 3

Statistics of "51-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG9

nom:

6853

rdg:

6862

diff:

BG10

nom:

6742

rdg:

6752

diff:

BG11

nom:

6701

rdg:

6713

diff:

S-A3

nom:

6560.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group S-A3

Formula of calculation:

sum(SAG,S1,SBG,S2) / 4

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

SAG

nom:

6569

rdg:

6576

diff:

nom:

6515

rdg:

6525

diff:

SBG

nom:

6597

rdg:

6603

diff:

nom:

6560

rdg:

6566

diff:

Left brake

nom:

6963.54

rdg:

diff:

Re-measure

Comment

Averages of group F

Formula of calculation:

sum(FG1,FG2,FG3,FG4,FG5,FG6,FG7,FG8,FG9,FG10,FG11,FG12,FG13) / 13

FG1

nom:

7857

rdg:

5538

diff:

FG2

nom:

7508

rdg:

5190

diff:

FG3

nom:

7260

rdg:

4945

diff:

FG4

nom:

7249

rdg:

4934

diff:

FG5

nom:

7096

rdg:

4779

diff:

FG6

nom:

6954

rdg:

4637

diff:

FG7

nom:

6774

rdg:

4458

diff:

FG8

nom:

6808

rdg:

4497

diff:

FG9

nom:

6692

rdg:

4373

diff:

FG10

nom:

6588

rdg:

4271

diff:

FG11

nom:

6542

rdg:

4225

diff:

FG12

nom:

6548

rdg:

4232

diff:

FG13

nom:

6650

rdg:

4334

diff:

Right riser

nom:

7350.38

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A1

Formula of calculation:

sum(AG1,AG2,AG3,AG4,AAG1,AAG2,AAG3,AAG4) / 8

Statistics of "55-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG1

nom:

7456

rdg:

7478

diff:

AG2

nom:

7329

rdg:

7354

diff:

AG3

nom:

7293

rdg:

7321

diff:

AG4

nom:

7348

rdg:

7370

diff:

AAG1

nom:

7446

rdg:

7467

diff:

AAG2

nom:

7315

rdg:

7339

diff:

AAG3

nom:

7279

rdg:

7307

diff:

AAG4

nom:

7337

rdg:

7361

diff:

nom:

7370.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B1

Formula of calculation:

sum(BG1,BG2,BG3,BG4,CG1,CG2,CG3,CG4) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG1

nom:

7411

rdg:

7420

diff:

BG2

nom:

7286

rdg:

7300

diff:

BG3

nom:

7250

rdg:

7267

diff:

BG4

nom:

7301

rdg:

7315

diff:

CG1

nom:

7531

rdg:

7533

diff:

CG2

nom:

7408

rdg:

7412

diff:

CG3

nom:

7368

rdg:

7375

diff:

CG4

nom:

7411

rdg:

7417

diff:

nom:

7119.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group A2

Formula of calculation:

sum(AG5,AG6,AG7,AG8,AAG5,AAG6,AAG7,AAG8) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG5

nom:

7261

rdg:

7285

diff:

AG6

nom:

7126

rdg:

7153

diff:

AG7

nom:

7058

rdg:

7078

diff:

AG8

nom:

7058

rdg:

7076

diff:

AAG5

nom:

7248

rdg:

7272

diff:

AAG6

nom:

7115

rdg:

7137

diff:

AAG7

nom:

7047

rdg:

7063

diff:

AAG8

nom:

7045

rdg:

7059

diff:

nom:

7137.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B2

Formula of calculation:

sum(BG5,BG6,BG7,BG8,CG5,CG6,CG7,CG8) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG5

nom:

7225

rdg:

7242

diff:

BG6

nom:

7080

rdg:

7090

diff:

BG7

nom:

7018

rdg:

7027

diff:

BG8

nom:

7047

rdg:

7057

diff:

CG5

nom:

7328

rdg:

7339

diff:

CG6

nom:

7177

rdg:

7189

diff:

CG7

nom:

7106

rdg:

7117

diff:

CG8

nom:

7122

rdg:

7134

diff:

S-A3

nom:

6776.33

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group S-A3

Formula of calculation:

sum(AG9,AG10,AG11) / 3

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

AG9

nom:

6863

rdg:

6859

diff:

AG10

nom:

6753

rdg:

6747

diff:

AG11

nom:

6713

rdg:

6712

diff:

nom:

6765.33

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group B3

Formula of calculation:

sum(BG9,BG10,BG11) / 3

Statistics of "51-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

BG9

nom:

6853

rdg:

6862

diff:

BG10

nom:

6742

rdg:

6749

diff:

BG11

nom:

6701

rdg:

6715

diff:

S-A3

nom:

6560.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group S-A3

Formula of calculation:

sum(SAG,S1,SBG,S2) / 4

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

SAG

nom:

6569

rdg:

6579

diff:

nom:

6515

rdg:

6524

diff:

SBG

nom:

6597

rdg:

6601

diff:

nom:

6560

rdg:

6570

diff:

Right brake

nom:

6963.54

rdg:

diff:

Re-measure

Comment

Averages of group F

Formula of calculation:

sum(FG1,FG2,FG3,FG4,FG5,FG6,FG7,FG8,FG9,FG10,FG11,FG12,FG13) / 13

FG1

nom:

7857

rdg:

5541

diff:

FG2

nom:

7508

rdg:

5192

diff:

FG3

nom:

7260

rdg:

4950

diff:

FG4

nom:

7249

rdg:

4935

diff:

FG5

nom:

7096

rdg:

4780

diff:

FG6

nom:

6954

rdg:

4631

diff:

FG7

nom:

6774

rdg:

4454

diff:

FG8

nom:

6808

rdg:

4488

diff:

FG9

nom:

6692

rdg:

4374

diff:

FG10

nom:

6588

rdg:

4274

diff:

FG11

nom:

6542

rdg:

4230

diff:

FG12

nom:

6548

rdg:

4234

diff:

FG13

nom:

6650

rdg:

4335

diff:

Help

AoI

The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.

ref

The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:

groups and rows	Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points	Clicking the white area beneath the suspension point name

nom

The nominal length between suspension point and main riser loop.

rdg

The actual reading from your measurement device. When measuring, rdg is the input field.

diff

The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.

colors

Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.

status

Color coded dots are shown for manual, imported & laser values

Also take a look at the Manual

Continue trimming procedure

inject html