Result

2026-08-18 16:44 UTC 2026-08-18 16:07 UTC  … 

Ozone Alpina 5 MS (2025)

General Information
ManufacturerOzone Paragliders LTD
ModelAlpina 5
Year2025
SizeMS
Production date2025-10
Line chartOpen
Total airtime60h
Line set airtime60h
Tolerance +/- 10mm (Review)
Data integrity & access

    Settings

    The deviation of the measured values from the nominal values is between 0 and 13mm. Adjust the value according to your measuring set-up.
    Put a positive value if readings are too short.
    Put a negative value if readings are too long.

    Wing as seen from above in flight

    AR1

    A1a
    A2a
    A3a
    A4a
    A1b
    A2b
    A3b
    A4b

    BR1

    B1
    B2
    B3
    B4
    B5
    B6
    C1
    C2
    C3
    C4
    C5
    C6

    AR2

    A5a
    A6a
    A7a
    A8a
    A5b
    A6b
    A7b
    A8b

    BR2

    B7
    B8
    B9
    B10
    B11
    B12
    C7
    C8
    C9
    C10
    C11
    C12

    ARL3

    A9
    A10
    A11
    A12
    A13
    A14
    A15
    B17
    B18
    B19

    BRL3

    B13
    B14
    B15
    B16

    AR1

    A1a
    A2a
    A3a
    A4a
    A1b
    A2b
    A3b
    A4b

    BR1

    B1
    B2
    B3
    B4
    B5
    B6
    C1
    C2
    C3
    C4
    C5
    C6

    AR2

    A5a
    A6a
    A7a
    A8a
    A5b
    A6b
    A7b
    A8b

    BR2

    B7
    B8
    B9
    B10
    B11
    B12
    C7
    C8
    C9
    C10
    C11
    C12

    ARL3

    A9
    A10
    A11
    A12
    A13
    A14
    A15
    B17
    B18
    B19

    BRL3

    B13
    B14
    B15
    B16
    Offsets relative to median diff (-1)
    AR1
    BR1
    AR2
    BR2
    ARL3
    BRL3
    AR1
    BR1
    AR2
    BR2
    ARL3
    BRL3

    Left riser

    nom:
    7002.63
    rdg:
    diff:

    Averages of group AR1

    Formula of calculation:

    sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

    Statistics of "56-Softlink"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    A1a
    nom:
    7078
    rdg:
    7081
    diff:
    A2a
    nom:
    7005
    rdg:
    7008
    diff:
     
    A3a
    nom:
    6966
    rdg:
    6965
    diff:
    A4a
    nom:
    6987
    rdg:
    6991
    diff:
    A1b
    nom:
    7065
    rdg:
    7066
    diff:
    A2b
    nom:
    6991
    rdg:
    6989
    diff:
     
    A3b
    nom:
    6953
    rdg:
    6950
    diff:
    A4b
    nom:
    6976
    rdg:
    6973
    diff:
    nom:
    7016.42
    rdg:
    diff:

    Averages of group BR1

    Formula of calculation:

    sum(B1,B2,B3,B4,B5,B6,C1,C2,C3,C4,C5,C6) / 12

    Statistics of "52-Softlink"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    B1
    nom:
    7043
    rdg:
    7042
    diff:
    B2
    nom:
    6971
    rdg:
    6964
    diff:
    B3
    nom:
    6959
    rdg:
    6957
    diff:
    B4
    nom:
    6926
    rdg:
    6926
    diff:
    B5
    nom:
    6945
    rdg:
    6944
    diff:
    B6
    nom:
    6968
    rdg:
    6967
    diff:
    C1
    nom:
    7140
    rdg:
    7142
    diff:
    C2
    nom:
    7070
    rdg:
    7072
    diff:
    C3
    nom:
    7058
    rdg:
    7062
    diff:
    C4
    nom:
    7023
    rdg:
    7027
    diff:
    C5
    nom:
    7036
    rdg:
    7034
    diff:
    C6
    nom:
    7058
    rdg:
    7056
    diff:
    nom:
    6800.75
    rdg:
    diff:

    Averages of group AR2

    Formula of calculation:

    sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

    Statistics of "56-Softlink"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    A5a
    nom:
    6910
    rdg:
    6911
    diff:
    A6a
    nom:
    6817
    rdg:
    6819
    diff:
     
    A7a
    nom:
    6744
    rdg:
    6744
    diff:
    A8a
    nom:
    6748
    rdg:
    6747
    diff:
    A5b
    nom:
    6899
    rdg:
    6896
    diff:
    A6b
    nom:
    6807
    rdg:
    6807
    diff:
     
    A7b
    nom:
    6736
    rdg:
    6734
    diff:
    A8b
    nom:
    6745
    rdg:
    6742
    diff:
    nom:
    6800.83
    rdg:
    diff:

    Averages of group BR2

    Formula of calculation:

    sum(B7,B8,B9,B10,B11,B12,C7,C8,C9,C10,C11,C12) / 12

    Statistics of "52-Softlink"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    B7
    nom:
    6898
    rdg:
    6901
    diff:
    B8
    nom:
    6798
    rdg:
    6800
    diff:
    B9
    nom:
    6775
    rdg:
    6776
    diff:
    B10
    nom:
    6710
    rdg:
    6710
    diff:
    B11
    nom:
    6691
    rdg:
    6696
    diff:
    B12
    nom:
    6703
    rdg:
    6708
    diff:
    C7
    nom:
    6986
    rdg:
    6990
    diff:
    C8
    nom:
    6882
    rdg:
    6882
    diff:
    C9
    nom:
    6858
    rdg:
    6859
    diff:
    C10
    nom:
    6785
    rdg:
    6792
    diff:
    C11
    nom:
    6766
    rdg:
    6770
    diff:
    C12
    nom:
    6758
    rdg:
    6763
    diff:
    nom:
    6483.50
    rdg:
    diff:

    Averages of group ARL3

    Formula of calculation:

    sum(A9,A10,A11,A12) / 4

    ARL3 contains suspension points that are excluded from the average:

    A13,A14,A15,B17,B18,B19

    Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

    Statistics of "52-Softlink"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    A9
    nom:
    6589
    rdg:
    6584
    diff:
    A10
    nom:
    6500
    rdg:
    6493
    diff:
    A11
    nom:
    6433
    rdg:
    6431
    diff:
    A12
    nom:
    6412
    rdg:
    6408
    diff:
    A13
    nom:
    6337
    rdg:
    6329
    diff:
    A14
    nom:
    6312
    rdg:
    6303
    diff:
    A15
    nom:
    6337
    rdg:
    6328
    diff:
     
     
     
     
    B17
    nom:
    6350
    rdg:
    6345
    diff:
    B18
    nom:
    6355
    rdg:
    6345
    diff:
    B19
    nom:
    6366
    rdg:
    6353
    diff:
    nom:
    6487.00
    rdg:
    diff:

    Averages of group BRL3

    Formula of calculation:

    sum(B13,B14,B15,B16) / 4

    Statistics of "51-Softlink"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    B13
    nom:
    6581
    rdg:
    6585
    diff:
    B14
    nom:
    6493
    rdg:
    6497
    diff:
    B15
    nom:
    6444
    rdg:
    6448
    diff:
    B16
    nom:
    6430
    rdg:
    6434
    diff:

    Right riser

    nom:
    7002.63
    rdg:
    diff:

    Averages of group AR1

    Formula of calculation:

    sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

    Statistics of "56-Softlink"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    A1a
    nom:
    7078
    rdg:
    7077
    diff:
    A2a
    nom:
    7005
    rdg:
    7004
    diff:
     
    A3a
    nom:
    6966
    rdg:
    6966
    diff:
    A4a
    nom:
    6987
    rdg:
    6986
    diff:
    A1b
    nom:
    7065
    rdg:
    7074
    diff:
    A2b
    nom:
    6991
    rdg:
    6989
    diff:
     
    A3b
    nom:
    6953
    rdg:
    6951
    diff:
    A4b
    nom:
    6976
    rdg:
    6972
    diff:
    nom:
    7016.42
    rdg:
    diff:

    Averages of group BR1

    Formula of calculation:

    sum(B1,B2,B3,B4,B5,B6,C1,C2,C3,C4,C5,C6) / 12

    Statistics of "52-Softlink"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    B1
    nom:
    7043
    rdg:
    7044
    diff:
    B2
    nom:
    6971
    rdg:
    6970
    diff:
    B3
    nom:
    6959
    rdg:
    6961
    diff:
    B4
    nom:
    6926
    rdg:
    6926
    diff:
    B5
    nom:
    6945
    rdg:
    6943
    diff:
    B6
    nom:
    6968
    rdg:
    6964
    diff:
    C1
    nom:
    7140
    rdg:
    7140
    diff:
    C2
    nom:
    7070
    rdg:
    7069
    diff:
    C3
    nom:
    7058
    rdg:
    7056
    diff:
    C4
    nom:
    7023
    rdg:
    7023
    diff:
    C5
    nom:
    7036
    rdg:
    7029
    diff:
    C6
    nom:
    7058
    rdg:
    7054
    diff:
    nom:
    6800.75
    rdg:
    diff:

    Averages of group AR2

    Formula of calculation:

    sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

    Statistics of "56-Softlink"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    A5a
    nom:
    6910
    rdg:
    6907
    diff:
    A6a
    nom:
    6817
    rdg:
    6811
    diff:
     
    A7a
    nom:
    6744
    rdg:
    6746
    diff:
    A8a
    nom:
    6748
    rdg:
    6743
    diff:
    A5b
    nom:
    6899
    rdg:
    6893
    diff:
    A6b
    nom:
    6807
    rdg:
    6804
    diff:
     
    A7b
    nom:
    6736
    rdg:
    6736
    diff:
    A8b
    nom:
    6745
    rdg:
    6743
    diff:
    nom:
    6800.83
    rdg:
    diff:

    Averages of group BR2

    Formula of calculation:

    sum(B7,B8,B9,B10,B11,B12,C7,C8,C9,C10,C11,C12) / 12

    Statistics of "52-Softlink"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    B7
    nom:
    6898
    rdg:
    6897
    diff:
    B8
    nom:
    6798
    rdg:
    6800
    diff:
    B9
    nom:
    6775
    rdg:
    6778
    diff:
    B10
    nom:
    6710
    rdg:
    6715
    diff:
    B11
    nom:
    6691
    rdg:
    6695
    diff:
    B12
    nom:
    6703
    rdg:
    6705
    diff:
    C7
    nom:
    6986
    rdg:
    6984
    diff:
    C8
    nom:
    6882
    rdg:
    6883
    diff:
    C9
    nom:
    6858
    rdg:
    6856
    diff:
    C10
    nom:
    6785
    rdg:
    6788
    diff:
    C11
    nom:
    6766
    rdg:
    6765
    diff:
    C12
    nom:
    6758
    rdg:
    6758
    diff:
    nom:
    6483.50
    rdg:
    diff:

    Averages of group ARL3

    Formula of calculation:

    sum(A9,A10,A11,A12) / 4

    ARL3 contains suspension points that are excluded from the average:

    A13,A14,A15,B17,B18,B19

    Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

    Statistics of "52-Softlink"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    A9
    nom:
    6589
    rdg:
    6588
    diff:
    A10
    nom:
    6500
    rdg:
    6503
    diff:
    A11
    nom:
    6433
    rdg:
    6435
    diff:
    A12
    nom:
    6412
    rdg:
    6414
    diff:
    A13
    nom:
    6337
    rdg:
    6333
    diff:
    A14
    nom:
    6312
    rdg:
    6307
    diff:
    A15
    nom:
    6337
    rdg:
    6333
    diff:
     
     
     
     
    B17
    nom:
    6350
    rdg:
    6343
    diff:
    B18
    nom:
    6355
    rdg:
    6345
    diff:
    B19
    nom:
    6366
    rdg:
    6360
    diff:
    nom:
    6487.00
    rdg:
    diff:

    Averages of group BRL3

    Formula of calculation:

    sum(B13,B14,B15,B16) / 4

    Statistics of "51-Softlink"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    B13
    nom:
    6581
    rdg:
    6588
    diff:
    B14
    nom:
    6493
    rdg:
    6496
    diff:
    B15
    nom:
    6444
    rdg:
    6445
    diff:
    B16
    nom:
    6430
    rdg:
    6432
    diff:
     Help
    AoI The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.
    ref The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
    You can select/change the ref by:
    groups and rows Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
    points Clicking the white area beneath the suspension point name
    nom The nominal length between suspension point and main riser loop.
    rdg The actual reading from your measurement device. When measuring, rdg is the input field.
    diff The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.
    colors Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.
    status Color coded dots are shown for manual, imported & laser values
    Also take a look at the Manual

    Continue trimming procedure

    inject html