Help
AoI The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.
ref The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:
groups and rows Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points Clicking the white area beneath the suspension point name
nom The nominal length between suspension point and main riser loop.
rdg The actual reading from your measurement device. When measuring, rdg is the input field.
diff The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.
colors Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.
status Color coded dots are shown for manual, imported & laser values
Also take a look at the Manual

Result

 …  2026-04-21 17:53 UTC 2026-04-21 17:16 UTC

Ozone Lyght ML (2024)

General Information
ManufacturerOzone Paragliders LTD
ModelLyght
Year2024
SizeML
Production date2025-05
Line chartOpen
Total airtime107h
Line set airtime70h
Tolerance +/- 10mm (Review)
Data integrity & access
  • Contains manual values

Settings

The deviation of the measured values from the nominal values is between 0 and -17mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

AR1

A1a
A2a
A3a
A4a
A1b
A2b
A3b
A4b

BR1

B1
B2
B3
B4
C1
C2
C3
C4

AR2

A5a
A6a
A7a
A8a
A5b
A6b
A7b
A8b

BR2

B5
B6
B7
B8
C5
C6
C7
C8

AR3

A9
A10
A11
A12
A13
B12
B13

BR3

B9
B10
B11

KRL1

K1
K2
K3
K4
K5
K6
K7
K8
K9
K10
K11
K12

AR1

A1a
A2a
A3a
A4a
A1b
A2b
A3b
A4b

BR1

B1
B2
B3
B4
C1
C2
C3
C4

AR2

A5a
A6a
A7a
A8a
A5b
A6b
A7b
A8b

BR2

B5
B6
B7
B8
C5
C6
C7
C8

AR3

A9
A10
A11
A12
A13
B12
B13

BR3

B9
B10
B11

KRL1

K1
K2
K3
K4
K5
K6
K7
K8
K9
K10
K11
K12
Offsets relative to median diff (-6)
AR1
BR1
AR2
BR2
AR3
BR3
AR1
BR1
AR2
BR2
AR3
BR3

Left riser

nom:
7424.50
rdg:
diff:

Averages of group AR1

Formula of calculation:

sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A1a
nom:
7521
rdg:
7519
diff:
A2a
nom:
7415
rdg:
7409
diff:
A3a
nom:
7378
rdg:
7375
diff:
A4a
nom:
7412
rdg:
7406
diff:
A1b
nom:
7506
rdg:
7500
diff:
A2b
nom:
7400
rdg:
7396
diff:
A3b
nom:
7364
rdg:
7359
diff:
A4b
nom:
7400
rdg:
7391
diff:
nom:
7436.00
rdg:
diff:

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4,C1,C2,C3,C4) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

B1
nom:
7476
rdg:
7471
diff:
B2
nom:
7376
rdg:
7368
diff:
B3
nom:
7338
rdg:
7333
diff:
B4
nom:
7369
rdg:
7360
diff:
C1
nom:
7570
rdg:
7565
diff:
C2
nom:
7472
rdg:
7468
diff:
C3
nom:
7433
rdg:
7423
diff:
C4
nom:
7454
rdg:
7446
diff:
nom:
7187.63
rdg:
diff:

Averages of group AR2

Formula of calculation:

sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A5a
nom:
7331
rdg:
7327
diff:
A6a
nom:
7190
rdg:
7193
diff:
A7a
nom:
7117
rdg:
7117
diff:
A8a
nom:
7128
rdg:
7126
diff:
A5b
nom:
7321
rdg:
7318
diff:
A6b
nom:
7180
rdg:
7181
diff:
A7b
nom:
7110
rdg:
7105
diff:
A8b
nom:
7124
rdg:
7118
diff:
nom:
7187.63
rdg:
diff:

Averages of group BR2

Formula of calculation:

sum(B5,B6,B7,B8,C5,C6,C7,C8) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

B5
nom:
7289
rdg:
7276
diff:
B6
nom:
7153
rdg:
7144
diff:
B7
nom:
7079
rdg:
7065
diff:
B8
nom:
7084
rdg:
7074
diff:
C5
nom:
7374
rdg:
7364
diff:
C6
nom:
7232
rdg:
7222
diff:
C7
nom:
7151
rdg:
7137
diff:
C8
nom:
7139
rdg:
7126
diff:
nom:
6836.67
rdg:
diff:

Averages of group AR3

Formula of calculation:

sum(A9,A10,A11) / 3

AR3 contains suspension points that are excluded from the average:

A12,A13,B12,B13

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A9
nom:
6946
rdg:
6939
diff:
A10
nom:
6818
rdg:
6814
diff:
A11
nom:
6746
rdg:
6743
diff:
A12
nom:
6670
rdg:
6668
diff:
A13
nom:
6663
rdg:
6660
diff:
 
 
 
B12
nom:
6691
rdg:
6682
diff:
B13
nom:
6690
rdg:
6679
diff:
nom:
6836.33
rdg:
diff:

Averages of group BR3

Formula of calculation:

sum(B9,B10,B11) / 3

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

B9
nom:
6925
rdg:
6916
diff:
B10
nom:
6817
rdg:
6811
diff:
B11
nom:
6767
rdg:
6760
diff:

Left brake

nom:
7282.17
rdg:
diff:

Averages of group KRL1

Formula of calculation:

sum(K1,K2,K3,K4,K5,K6,K7,K8,K9,K10,K11,K12) / 12
K1
nom:
8094
rdg:
8056
diff:
K2
nom:
7699
rdg:
7667
diff:
K3
nom:
7485
rdg:
7454
diff:
K4
nom:
7406
rdg:
7374
diff:
K5
nom:
7269
rdg:
7239
diff:
K6
nom:
7076
rdg:
7046
diff:
K7
nom:
7009
rdg:
6975
diff:
K8
nom:
7114
rdg:
7082
diff:
K9
nom:
6994
rdg:
6966
diff:
K10
nom:
7030
rdg:
6999
diff:
K11
nom:
7000
rdg:
6972
diff:
K12
nom:
7210
rdg:
7182
diff:

Right riser

nom:
7424.50
rdg:
diff:

Averages of group AR1

Formula of calculation:

sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A1a
nom:
7521
rdg:
7515
diff:
A2a
nom:
7415
rdg:
7407
diff:
A3a
nom:
7378
rdg:
7372
diff:
A4a
nom:
7412
rdg:
7406
diff:
A1b
nom:
7506
rdg:
7503
diff:
A2b
nom:
7400
rdg:
7394
diff:
A3b
nom:
7364
rdg:
7360
diff:
A4b
nom:
7400
rdg:
7394
diff:
nom:
7436.00
rdg:
diff:

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4,C1,C2,C3,C4) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

B1
nom:
7476
rdg:
7467
diff:
B2
nom:
7376
rdg:
7363
diff:
B3
nom:
7338
rdg:
7326
diff:
B4
nom:
7369
rdg:
7358
diff:
C1
nom:
7570
rdg:
7559
diff:
C2
nom:
7472
rdg:
7459
diff:
C3
nom:
7433
rdg:
7420
diff:
C4
nom:
7454
rdg:
7441
diff:
nom:
7187.63
rdg:
diff:

Averages of group AR2

Formula of calculation:

sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A5a
nom:
7331
rdg:
7330
diff:
A6a
nom:
7190
rdg:
7188
diff:
A7a
nom:
7117
rdg:
7118
diff:
A8a
nom:
7128
rdg:
7123
diff:
A5b
nom:
7321
rdg:
7318
diff:
A6b
nom:
7180
rdg:
7177
diff:
A7b
nom:
7110
rdg:
7109
diff:
A8b
nom:
7124
rdg:
7118
diff:
nom:
7187.63
rdg:
diff:

Averages of group BR2

Formula of calculation:

sum(B5,B6,B7,B8,C5,C6,C7,C8) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

B5
nom:
7289
rdg:
7275
diff:
B6
nom:
7153
rdg:
7141
diff:
B7
nom:
7079
rdg:
7062
diff:
B8
nom:
7084
rdg:
7072
diff:
C5
nom:
7374
rdg:
7361
diff:
C6
nom:
7232
rdg:
7220
diff:
C7
nom:
7151
rdg:
7137
diff:
C8
nom:
7139
rdg:
7122
diff:
nom:
6836.67
rdg:
diff:

Averages of group AR3

Formula of calculation:

sum(A9,A10,A11) / 3

AR3 contains suspension points that are excluded from the average:

A12,A13,B12,B13

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A9
nom:
6946
rdg:
6941
diff:
A10
nom:
6818
rdg:
6814
diff:
A11
nom:
6746
rdg:
6745
diff:
A12
nom:
6670
rdg:
6664
diff:
A13
nom:
6663
rdg:
6655
diff:
 
 
 
B12
nom:
6691
rdg:
6681
diff:
B13
nom:
6690
rdg:
6683
diff:
nom:
6836.33
rdg:
diff:

Averages of group BR3

Formula of calculation:

sum(B9,B10,B11) / 3

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

B9
nom:
6925
rdg:
6915
diff:
B10
nom:
6817
rdg:
6808
diff:
B11
nom:
6767
rdg:
6755
diff:

Right brake

nom:
7282.17
rdg:
diff:

Averages of group KRL1

Formula of calculation:

sum(K1,K2,K3,K4,K5,K6,K7,K8,K9,K10,K11,K12) / 12
K1
nom:
8094
rdg:
8066
diff:
K2
nom:
7699
rdg:
7677
diff:
K3
nom:
7485
rdg:
7462
diff:
K4
nom:
7406
rdg:
7384
diff:
K5
nom:
7269
rdg:
7250
diff:
K6
nom:
7076
rdg:
7056
diff:
K7
nom:
7009
rdg:
6989
diff:
K8
nom:
7114
rdg:
7095
diff:
K9
nom:
6994
rdg:
6980
diff:
K10
nom:
7030
rdg:
7013
diff:
K11
nom:
7000
rdg:
6984
diff:
K12
nom:
7210
rdg:
7190
diff:

Continue trimming procedure

inject html