Result

^{…
2026-08-29 17:56 UTC

2026-08-26 20:11 UTC}

Ozone Lyght ML (2024)

General Information

Manufacturer	Ozone Paragliders LTD
Model	Lyght
Year	2024
Size	ML
Production date	2024-09
Line chart	Open
Total airtime	n/a
Line set airtime	n/a
Tolerance	+/- 10mm (Review)

Data integrity & access	Contains imported values

Settings

Manufacturer tolerance

Correction value

The deviation of the measured values from the nominal values is between 0 and -25mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

AR1

A1a

A2a

A3a

A4a

A1b

A2b

A3b

A4b

BR1

AR2

A5a

A6a

A7a

A8a

A5b

A6b

A7b

A8b

BR2

AR3

A10

A11

A12

A13

B12

B13

BR3

B10

B11

AR1

A1a

A2a

A3a

A4a

A1b

A2b

A3b

A4b

BR1

AR2

A5a

A6a

A7a

A8a

A5b

A6b

A7b

A8b

BR2

AR3

A10

A11

A12

A13

B12

B13

BR3

B10

B11

Offsets relative to median diff (-16)

AR1

BR1

AR2

BR2

AR3

BR3

AR1

BR1

AR2

BR2

AR3

BR3

Left riser

AR1

nom:

7424.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR1

Formula of calculation:

sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A1a

nom:

7521

rdg:

7518

diff:

A2a

nom:

7415

rdg:

7410

diff:

A3a

nom:

7378

rdg:

7372

diff:

A4a

nom:

7412

rdg:

7409

diff:

A1b

nom:

7506

rdg:

7504

diff:

A2b

nom:

7400

rdg:

7391

diff:

A3b

nom:

7364

rdg:

7356

diff:

A4b

nom:

7400

rdg:

7396

diff:

BR1

nom:

7436.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4,C1,C2,C3,C4) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7476

rdg:

7458

diff:

nom:

7376

rdg:

7356

diff:

nom:

7338

rdg:

7316

diff:

nom:

7369

rdg:

7352

diff:

nom:

7570

rdg:

7554

diff:

nom:

7472

rdg:

7455

diff:

nom:

7433

rdg:

7415

diff:

nom:

7454

rdg:

7435

diff:

AR2

nom:

7187.63

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR2

Formula of calculation:

sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A5a

nom:

7331

rdg:

7330

diff:

A6a

nom:

7190

rdg:

7184

diff:

A7a

nom:

7117

rdg:

7111

diff:

A8a

nom:

7128

rdg:

7120

diff:

A5b

nom:

7321

rdg:

7314

diff:

A6b

nom:

7180

rdg:

7177

diff:

A7b

nom:

7110

rdg:

7105

diff:

A8b

nom:

7124

rdg:

7117

diff:

BR2

nom:

7187.63

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR2

Formula of calculation:

sum(B5,B6,B7,B8,C5,C6,C7,C8) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7289

rdg:

7273

diff:

nom:

7153

rdg:

7137

diff:

nom:

7079

rdg:

7063

diff:

nom:

7084

rdg:

7066

diff:

nom:

7374

rdg:

7353

diff:

nom:

7232

rdg:

7212

diff:

nom:

7151

rdg:

7131

diff:

nom:

7139

rdg:

7121

diff:

AR3

nom:

6836.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR3

Formula of calculation:

sum(A9,A10,A11) / 3

AR3 contains suspension points that are excluded from the average:

A12,A13,B12,B13

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6946

rdg:

6935

diff:

A10

nom:

6818

rdg:

6811

diff:

A11

nom:

6746

rdg:

6737

diff:

A12

nom:

6670

rdg:

6659

diff:

A13

nom:

6663

rdg:

6647

diff:

B12

nom:

6691

rdg:

6677

diff:

B13

nom:

6690

rdg:

6677

diff:

BR3

nom:

6836.33

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR3

Formula of calculation:

sum(B9,B10,B11) / 3

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6925

rdg:

6906

diff:

B10

nom:

6817

rdg:

6798

diff:

B11

nom:

6767

rdg:

6744

diff:

Right riser

AR1

nom:

7424.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR1

Formula of calculation:

sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A1a

nom:

7521

rdg:

7518

diff:

A2a

nom:

7415

rdg:

7413

diff:

A3a

nom:

7378

rdg:

7374

diff:

A4a

nom:

7412

rdg:

7407

diff:

A1b

nom:

7506

rdg:

7507

diff:

A2b

nom:

7400

rdg:

7396

diff:

A3b

nom:

7364

rdg:

7360

diff:

A4b

nom:

7400

rdg:

7394

diff:

BR1

nom:

7436.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4,C1,C2,C3,C4) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7476

rdg:

7459

diff:

nom:

7376

rdg:

7359

diff:

nom:

7338

rdg:

7317

diff:

nom:

7369

rdg:

7348

diff:

nom:

7570

rdg:

7553

diff:

nom:

7472

rdg:

7451

diff:

nom:

7433

rdg:

7414

diff:

nom:

7454

rdg:

7435

diff:

AR2

nom:

7187.63

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR2

Formula of calculation:

sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A5a

nom:

7331

rdg:

7318

diff:

A6a

nom:

7190

rdg:

7178

diff:

A7a

nom:

7117

rdg:

7105

diff:

A8a

nom:

7128

rdg:

7112

diff:

A5b

nom:

7321

rdg:

7313

diff:

A6b

nom:

7180

rdg:

7172

diff:

A7b

nom:

7110

rdg:

7096

diff:

A8b

nom:

7124

rdg:

7112

diff:

BR2

nom:

7187.63

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR2

Formula of calculation:

sum(B5,B6,B7,B8,C5,C6,C7,C8) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7289

rdg:

7272

diff:

nom:

7153

rdg:

7136

diff:

nom:

7079

rdg:

7059

diff:

nom:

7084

rdg:

7059

diff:

nom:

7374

rdg:

7353

diff:

nom:

7232

rdg:

7210

diff:

nom:

7151

rdg:

7128

diff:

nom:

7139

rdg:

7116

diff:

AR3

nom:

6836.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR3

Formula of calculation:

sum(A9,A10,A11) / 3

AR3 contains suspension points that are excluded from the average:

A12,A13,B12,B13

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6946

rdg:

6936

diff:

A10

nom:

6818

rdg:

6814

diff:

A11

nom:

6746

rdg:

6736

diff:

A12

nom:

6670

rdg:

6653

diff:

A13

nom:

6663

rdg:

6646

diff:

B12

nom:

6691

rdg:

6675

diff:

B13

nom:

6690

rdg:

6672

diff:

BR3

nom:

6836.33

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR3

Formula of calculation:

sum(B9,B10,B11) / 3

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6925

rdg:

6910

diff:

B10

nom:

6817

rdg:

6798

diff:

B11

nom:

6767

rdg:

6743

diff:

Help

AoI

The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.

ref

The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:

groups and rows	Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points	Clicking the white area beneath the suspension point name

nom

The nominal length between suspension point and main riser loop.

rdg

The actual reading from your measurement device. When measuring, rdg is the input field.

diff

The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.

colors

Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.

status

Color coded dots are shown for manual, imported & laser values

Also take a look at the Manual

Continue trimming procedure

inject html