Help
AoI The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.
ref The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:
groups and rows Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points Clicking the white area beneath the suspension point name
nom The nominal length between suspension point and main riser loop.
rdg The actual reading from your measurement device. When measuring, rdg is the input field.
diff The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.
colors Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.
status Color coded dots are shown for manual, imported & laser values
Also take a look at the Manual

Result

 …  2026-05-09 14:57 UTC 2025-04-18 16:13 UTC

Ozone Photon S (2023)

General Information
ManufacturerOzone Paragliders LTD
ModelPhoton
Year2023
SizeS
Production date2024-10
Line chartOpen
Total airtime10h
Line set airtime10h
Tolerance +/- 10mm (Review)
Data integrity & access
  • Checksum valid

Settings

The deviation of the measured values from the nominal values is between 0 and -28mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

AR1

A1a
A2a
A3a
A4a
A1b
A2b
A3b
A4b

BR1

B1
B2
B3
B4
C1
C2
C3
C4

AR2

A5a
A6a
A7a
A8a
A5b
A6b
A7b
A8b

BR2

B5
B6
B7
B8
C5
C6
C7
C8

AR3

A9
A10
A11
A12
A13
B12
B13

BR3

B9
B10
B11

AR1

A1a
A2a
A3a
A4a
A1b
A2b
A3b
A4b

BR1

B1
B2
B3
B4
C1
C2
C3
C4

AR2

A5a
A6a
A7a
A8a
A5b
A6b
A7b
A8b

BR2

B5
B6
B7
B8
C5
C6
C7
C8

AR3

A9
A10
A11
A12
A13
B12
B13

BR3

B9
B10
B11
Offsets relative to median diff (-19)
AR1
BR1
AR2
BR2
AR3
BR3
AR1
BR1
AR2
BR2
AR3
BR3

Left riser

nom:
6889.50
rdg:
diff:

Averages of group AR1

Formula of calculation:

sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

Statistics of "edelrid-800X-360-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
282 11 1.9 32/100 high
70 16 1.73 33/100 high
 
From
To Count Median Spread Quality Evidence
83 6 1.56 32/100 high
7 13 2.49 28/100 medium
 
From
To Count Median Spread Quality Evidence
8 6 3.6 27/100 medium
 
A1a
nom:
6979
rdg:
6966
diff:
A2a
nom:
6882
rdg:
6865
diff:
A3a
nom:
6847
rdg:
6830
diff:
A4a
nom:
6878
rdg:
6860
diff:
A1b
nom:
6965
rdg:
6952
diff:
A2b
nom:
6867
rdg:
6853
diff:
A3b
nom:
6833
rdg:
6817
diff:
A4b
nom:
6865
rdg:
6849
diff:
nom:
6906.63
rdg:
diff:

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4,C1,C2,C3,C4) / 8

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
172 10 1.82 31/100 high
34 13 1.65 32/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
B1
nom:
6945
rdg:
6926
diff:
B2
nom:
6851
rdg:
6830
diff:
B3
nom:
6816
rdg:
6792
diff:
B4
nom:
6845
rdg:
6822
diff:
C1
nom:
7031
rdg:
7011
diff:
C2
nom:
6940
rdg:
6918
diff:
C3
nom:
6903
rdg:
6882
diff:
C4
nom:
6922
rdg:
6901
diff:
nom:
6676.50
rdg:
diff:

Averages of group AR2

Formula of calculation:

sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

Statistics of "edelrid-800X-360-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
282 11 1.9 32/100 high
70 16 1.73 33/100 high
 
From
To Count Median Spread Quality Evidence
83 6 1.56 32/100 high
7 13 2.49 28/100 medium
 
From
To Count Median Spread Quality Evidence
8 6 3.6 27/100 medium
 
A5a
nom:
6809
rdg:
6791
diff:
A6a
nom:
6678
rdg:
6660
diff:
A7a
nom:
6612
rdg:
6587
diff:
A8a
nom:
6623
rdg:
6596
diff:
A5b
nom:
6798
rdg:
6780
diff:
A6b
nom:
6668
rdg:
6651
diff:
A7b
nom:
6605
rdg:
6582
diff:
A8b
nom:
6619
rdg:
6595
diff:
nom:
6670.88
rdg:
diff:

Averages of group BR2

Formula of calculation:

sum(B5,B6,B7,B8,C5,C6,C7,C8) / 8

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
172 10 1.82 31/100 high
34 13 1.65 32/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
B5
nom:
6765
rdg:
6745
diff:
B6
nom:
6639
rdg:
6618
diff:
B7
nom:
6571
rdg:
6551
diff:
B8
nom:
6576
rdg:
6555
diff:
C5
nom:
6843
rdg:
6821
diff:
C6
nom:
6711
rdg:
6691
diff:
C7
nom:
6636
rdg:
6613
diff:
C8
nom:
6626
rdg:
6604
diff:
nom:
6345.67
rdg:
diff:

Averages of group AR3

Formula of calculation:

sum(A9,A10,A11) / 3

AR3 contains suspension points that are excluded from the average:

A12,A13,B12,B13

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
172 10 1.82 31/100 high
34 13 1.65 32/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
A9
nom:
6444
rdg:
6428
diff:
A10
nom:
6327
rdg:
6313
diff:
A11
nom:
6266
rdg:
6253
diff:
A12
nom:
6189
rdg:
6183
diff:
A13
nom:
6183
rdg:
6177
diff:
 
 
 
B12
nom:
6208
rdg:
6201
diff:
B13
nom:
6209
rdg:
6202
diff:
nom:
6349.00
rdg:
diff:

Averages of group BR3

Formula of calculation:

sum(B9,B10,B11) / 3

Statistics of "liros-dsl-140/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
139 9 2.35 37/100 high
22 13 2.35 36/100 high
 
From
To Count Median Spread Quality Evidence
25 4 1.87 36/100 high
5 15 2.1 72/100 high
 
From
To Count Median Spread Quality Evidence
3 10 1.35 34/100 medium
 
From
To Count Median Spread Quality Evidence
 
B9
nom:
6431
rdg:
6412
diff:
B10
nom:
6330
rdg:
6312
diff:
B11
nom:
6286
rdg:
6267
diff:

Right riser

nom:
6889.50
rdg:
diff:

Averages of group AR1

Formula of calculation:

sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

Statistics of "edelrid-800X-360-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
282 11 1.9 32/100 high
70 16 1.73 33/100 high
 
From
To Count Median Spread Quality Evidence
83 6 1.56 32/100 high
7 13 2.49 28/100 medium
 
From
To Count Median Spread Quality Evidence
8 6 3.6 27/100 medium
 
A1a
nom:
6979
rdg:
6959
diff:
A2a
nom:
6882
rdg:
6860
diff:
A3a
nom:
6847
rdg:
6825
diff:
A4a
nom:
6878
rdg:
6857
diff:
A1b
nom:
6965
rdg:
6946
diff:
A2b
nom:
6867
rdg:
6847
diff:
A3b
nom:
6833
rdg:
6813
diff:
A4b
nom:
6865
rdg:
6845
diff:
nom:
6906.63
rdg:
diff:

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4,C1,C2,C3,C4) / 8

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
172 10 1.82 31/100 high
34 13 1.65 32/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
B1
nom:
6945
rdg:
6924
diff:
B2
nom:
6851
rdg:
6833
diff:
B3
nom:
6816
rdg:
6795
diff:
B4
nom:
6845
rdg:
6823
diff:
C1
nom:
7031
rdg:
7009
diff:
C2
nom:
6940
rdg:
6919
diff:
C3
nom:
6903
rdg:
6881
diff:
C4
nom:
6922
rdg:
6902
diff:
nom:
6676.50
rdg:
diff:

Averages of group AR2

Formula of calculation:

sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

Statistics of "edelrid-800X-360-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
282 11 1.9 32/100 high
70 16 1.73 33/100 high
 
From
To Count Median Spread Quality Evidence
83 6 1.56 32/100 high
7 13 2.49 28/100 medium
 
From
To Count Median Spread Quality Evidence
8 6 3.6 27/100 medium
 
A5a
nom:
6809
rdg:
6786
diff:
A6a
nom:
6678
rdg:
6654
diff:
A7a
nom:
6612
rdg:
6584
diff:
A8a
nom:
6623
rdg:
6595
diff:
A5b
nom:
6798
rdg:
6776
diff:
A6b
nom:
6668
rdg:
6646
diff:
A7b
nom:
6605
rdg:
6579
diff:
A8b
nom:
6619
rdg:
6592
diff:
nom:
6670.88
rdg:
diff:

Averages of group BR2

Formula of calculation:

sum(B5,B6,B7,B8,C5,C6,C7,C8) / 8

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
172 10 1.82 31/100 high
34 13 1.65 32/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
B5
nom:
6765
rdg:
6747
diff:
B6
nom:
6639
rdg:
6623
diff:
B7
nom:
6571
rdg:
6556
diff:
B8
nom:
6576
rdg:
6558
diff:
C5
nom:
6843
rdg:
6825
diff:
C6
nom:
6711
rdg:
6695
diff:
C7
nom:
6636
rdg:
6622
diff:
C8
nom:
6626
rdg:
6610
diff:
nom:
6345.67
rdg:
diff:

Averages of group AR3

Formula of calculation:

sum(A9,A10,A11) / 3

AR3 contains suspension points that are excluded from the average:

A12,A13,B12,B13

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
172 10 1.82 31/100 high
34 13 1.65 32/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
A9
nom:
6444
rdg:
6429
diff:
A10
nom:
6327
rdg:
6313
diff:
A11
nom:
6266
rdg:
6249
diff:
A12
nom:
6189
rdg:
6178
diff:
A13
nom:
6183
rdg:
6174
diff:
 
 
 
B12
nom:
6208
rdg:
6194
diff:
B13
nom:
6209
rdg:
6195
diff:
nom:
6349.00
rdg:
diff:

Averages of group BR3

Formula of calculation:

sum(B9,B10,B11) / 3

Statistics of "liros-dsl-140/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
139 9 2.35 37/100 high
22 13 2.35 36/100 high
 
From
To Count Median Spread Quality Evidence
25 4 1.87 36/100 high
5 15 2.1 72/100 high
 
From
To Count Median Spread Quality Evidence
3 10 1.35 34/100 medium
 
From
To Count Median Spread Quality Evidence
 
B9
nom:
6431
rdg:
6413
diff:
B10
nom:
6330
rdg:
6315
diff:
B11
nom:
6286
rdg:
6274
diff:

Continue trimming procedure

inject html