Help
AoI The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.
ref The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:
groups and rows Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points Clicking the white area beneath the suspension point name
nom The nominal length between suspension point and main riser loop.
rdg The actual reading from your measurement device. When measuring, rdg is the input field.
diff The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.
colors Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.
status Color coded dots are shown for manual, imported & laser values
Also take a look at the Manual

Result

2026-04-14 20:46 UTC

Ozone Zeno 2 ML (2022)

General Information
ManufacturerOzone Paragliders LTD
ModelZeno 2
Year2022
SizeML
Production date2022-09
Line chartOpen
Total airtime60h
Line set airtime60h
Tolerance +/- 10mm (Review)
Data integrity & access
  • Contains manual values

Settings

The deviation of the measured values from the nominal values is between 0 and -37mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

AR1

A1a
A2a
A3a
A4a
A1b
A2b
A3b
A4b

BR1

B1
B2
B3
B4
C1
C2
C3
C4

AR2

A5a
A6a
A7a
A8a
A5b
A6b
A7b
A8b

BR2

B5
B6
B7
B8
C5
C6
C7
C8

AR3

A9
A10
A11
A12
A13
A14
B12
B13
B14

BR3

B9
B10
B11

AR1

A1a
A2a
A3a
A4a
A1b
A2b
A3b
A4b

BR1

B1
B2
B3
B4
C1
C2
C3
C4

AR2

A5a
A6a
A7a
A8a
A5b
A6b
A7b
A8b

BR2

B5
B6
B7
B8
C5
C6
C7
C8

AR3

A9
A10
A11
A12
A13
A14
B12
B13
B14

BR3

B9
B10
B11
Offsets relative to median diff (-19)
AR1
BR1
AR2
BR2
AR3
BR3
AR1
BR1
AR2
BR2
AR3
BR3

Left riser

nom:
7819.88
rdg:
diff:

Averages of group AR1

Formula of calculation:

sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

Statistics of "edelrid-800X-360-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
257 11 1.89 31/100 high
59 17 1.76 36/100 high
 
From
To Count Median Spread Quality Evidence
83 6 1.56 32/100 high
7 13 2.49 28/100 medium
 
From
To Count Median Spread Quality Evidence
8 6 3.6 27/100 medium
 
A1a
nom:
7921
rdg:
7912
diff:
A2a
nom:
7810
rdg:
7801
diff:
A3a
nom:
7771
rdg:
7753
diff:
A4a
nom:
7805
rdg:
7789
diff:
A1b
nom:
7906
rdg:
7897
diff:
A2b
nom:
7795
rdg:
7784
diff:
A3b
nom:
7758
rdg:
7739
diff:
A4b
nom:
7793
rdg:
7774
diff:
nom:
7828.38
rdg:
diff:

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4,C1,C2,C3,C4) / 8

Statistics of "edelrid-800X-190-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
340 10 1.92 33/100 high
85 14 2.57 32/100 high
11 20 2.5 30/100 high
6 24 3.79 30/100 medium
 
From
To Count Median Spread Quality Evidence
287 4 1.53 34/100 high
19 12 2.7 30/100 high
5 14 1.41 31/100 medium
 
From
To Count Median Spread Quality Evidence
38 7 2.71 34/100 high
22 9 2.58 36/100 high
15 10 2.35 41/100 high
 
From
To Count Median Spread Quality Evidence
27 4 1.27 33/100 high
4 7 3.05 30/100 medium
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
B1
nom:
7883
rdg:
7859
diff:
B2
nom:
7782
rdg:
7761
diff:
B3
nom:
7746
rdg:
7727
diff:
B4
nom:
7767
rdg:
7748
diff:
C1
nom:
7951
rdg:
7933
diff:
C2
nom:
7853
rdg:
7834
diff:
C3
nom:
7814
rdg:
7794
diff:
C4
nom:
7831
rdg:
7815
diff:
nom:
7542.75
rdg:
diff:

Averages of group AR2

Formula of calculation:

sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

Statistics of "edelrid-800X-360-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
257 11 1.89 31/100 high
59 17 1.76 36/100 high
 
From
To Count Median Spread Quality Evidence
83 6 1.56 32/100 high
7 13 2.49 28/100 medium
 
From
To Count Median Spread Quality Evidence
8 6 3.6 27/100 medium
 
A5a
nom:
7697
rdg:
7681
diff:
A6a
nom:
7538
rdg:
7521
diff:
A7a
nom:
7461
rdg:
7438
diff:
A8a
nom:
7488
rdg:
7463
diff:
A5b
nom:
7687
rdg:
7664
diff:
A6b
nom:
7529
rdg:
7509
diff:
A7b
nom:
7456
rdg:
7432
diff:
A8b
nom:
7486
rdg:
7457
diff:
nom:
7553.63
rdg:
diff:

Averages of group BR2

Formula of calculation:

sum(B5,B6,B7,B8,C5,C6,C7,C8) / 8

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
168 10 1.91 30/100 high
28 13 1.37 34/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
B5
nom:
7661
rdg:
7640
diff:
B6
nom:
7519
rdg:
7502
diff:
B7
nom:
7441
rdg:
7422
diff:
B8
nom:
7451
rdg:
7430
diff:
C5
nom:
7738
rdg:
7720
diff:
C6
nom:
7595
rdg:
7579
diff:
C7
nom:
7512
rdg:
7494
diff:
C8
nom:
7512
rdg:
7493
diff:
nom:
7131.00
rdg:
diff:

Averages of group AR3

Formula of calculation:

sum(A9,A10,A11) / 3

AR3 contains suspension points that are excluded from the average:

A12,A13,A14,B12,B13,B14

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
168 10 1.91 30/100 high
28 13 1.37 34/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
A9
nom:
7238
rdg:
7215
diff:
A10
nom:
7112
rdg:
7090
diff:
A11
nom:
7043
rdg:
7020
diff:
A12
nom:
6996
rdg:
6973
diff:
A13
nom:
6976
rdg:
6951
diff:
A14
nom:
7018
rdg:
6981
diff:
 
 
 
B12
nom:
7005
rdg:
6983
diff:
B13
nom:
7013
rdg:
6990
diff:
B14
nom:
7041
rdg:
7004
diff:
nom:
7155.33
rdg:
diff:

Averages of group BR3

Formula of calculation:

sum(B9,B10,B11) / 3

Statistics of "liros-dsl-140/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
132 10 2.35 37/100 high
19 13 2.46 35/100 high
 
From
To Count Median Spread Quality Evidence
25 4 1.87 36/100 high
5 15 2.1 72/100 high
 
From
To Count Median Spread Quality Evidence
3 10 1.35 34/100 medium
 
From
To Count Median Spread Quality Evidence
 
B9
nom:
7238
rdg:
7218
diff:
B10
nom:
7135
rdg:
7116
diff:
B11
nom:
7093
rdg:
7074
diff:

Right riser

nom:
7819.88
rdg:
diff:

Averages of group AR1

Formula of calculation:

sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

Statistics of "edelrid-800X-360-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
257 11 1.89 31/100 high
59 17 1.76 36/100 high
 
From
To Count Median Spread Quality Evidence
83 6 1.56 32/100 high
7 13 2.49 28/100 medium
 
From
To Count Median Spread Quality Evidence
8 6 3.6 27/100 medium
 
A1a
nom:
7921
rdg:
7908
diff:
A2a
nom:
7810
rdg:
7793
diff:
A3a
nom:
7771
rdg:
7754
diff:
A4a
nom:
7805
rdg:
7788
diff:
A1b
nom:
7906
rdg:
7889
diff:
A2b
nom:
7795
rdg:
7778
diff:
A3b
nom:
7758
rdg:
7738
diff:
A4b
nom:
7793
rdg:
7775
diff:
nom:
7828.38
rdg:
diff:

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4,C1,C2,C3,C4) / 8

Statistics of "edelrid-800X-190-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
340 10 1.92 33/100 high
85 14 2.57 32/100 high
11 20 2.5 30/100 high
6 24 3.79 30/100 medium
 
From
To Count Median Spread Quality Evidence
287 4 1.53 34/100 high
19 12 2.7 30/100 high
5 14 1.41 31/100 medium
 
From
To Count Median Spread Quality Evidence
38 7 2.71 34/100 high
22 9 2.58 36/100 high
15 10 2.35 41/100 high
 
From
To Count Median Spread Quality Evidence
27 4 1.27 33/100 high
4 7 3.05 30/100 medium
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
B1
nom:
7883
rdg:
7860
diff:
B2
nom:
7782
rdg:
7763
diff:
B3
nom:
7746
rdg:
7725
diff:
B4
nom:
7767
rdg:
7744
diff:
C1
nom:
7951
rdg:
7932
diff:
C2
nom:
7853
rdg:
7835
diff:
C3
nom:
7814
rdg:
7795
diff:
C4
nom:
7831
rdg:
7810
diff:
nom:
7542.75
rdg:
diff:

Averages of group AR2

Formula of calculation:

sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

Statistics of "edelrid-800X-360-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
257 11 1.89 31/100 high
59 17 1.76 36/100 high
 
From
To Count Median Spread Quality Evidence
83 6 1.56 32/100 high
7 13 2.49 28/100 medium
 
From
To Count Median Spread Quality Evidence
8 6 3.6 27/100 medium
 
A5a
nom:
7697
rdg:
7682
diff:
A6a
nom:
7538
rdg:
7530
diff:
A7a
nom:
7461
rdg:
7447
diff:
A8a
nom:
7488
rdg:
7477
diff:
A5b
nom:
7687
rdg:
7669
diff:
A6b
nom:
7529
rdg:
7519
diff:
A7b
nom:
7456
rdg:
7440
diff:
A8b
nom:
7486
rdg:
7467
diff:
nom:
7553.63
rdg:
diff:

Averages of group BR2

Formula of calculation:

sum(B5,B6,B7,B8,C5,C6,C7,C8) / 8

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
168 10 1.91 30/100 high
28 13 1.37 34/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
B5
nom:
7661
rdg:
7643
diff:
B6
nom:
7519
rdg:
7504
diff:
B7
nom:
7441
rdg:
7421
diff:
B8
nom:
7451
rdg:
7430
diff:
C5
nom:
7738
rdg:
7725
diff:
C6
nom:
7595
rdg:
7582
diff:
C7
nom:
7512
rdg:
7497
diff:
C8
nom:
7512
rdg:
7494
diff:
nom:
7131.00
rdg:
diff:

Averages of group AR3

Formula of calculation:

sum(A9,A10,A11) / 3

AR3 contains suspension points that are excluded from the average:

A12,A13,A14,B12,B13,B14

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
168 10 1.91 30/100 high
28 13 1.37 34/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
A9
nom:
7238
rdg:
7221
diff:
A10
nom:
7112
rdg:
7094
diff:
A11
nom:
7043
rdg:
7021
diff:
A12
nom:
6996
rdg:
6970
diff:
A13
nom:
6976
rdg:
6952
diff:
A14
nom:
7018
rdg:
6993
diff:
 
 
 
B12
nom:
7005
rdg:
6983
diff:
B13
nom:
7013
rdg:
6991
diff:
B14
nom:
7041
rdg:
7014
diff:
nom:
7155.33
rdg:
diff:

Averages of group BR3

Formula of calculation:

sum(B9,B10,B11) / 3

Statistics of "liros-dsl-140/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
132 10 2.35 37/100 high
19 13 2.46 35/100 high
 
From
To Count Median Spread Quality Evidence
25 4 1.87 36/100 high
5 15 2.1 72/100 high
 
From
To Count Median Spread Quality Evidence
3 10 1.35 34/100 medium
 
From
To Count Median Spread Quality Evidence
 
B9
nom:
7238
rdg:
7221
diff:
B10
nom:
7135
rdg:
7116
diff:
B11
nom:
7093
rdg:
7076
diff:

Continue trimming procedure

inject html