Result

^{…
2026-06-26 22:39 UTC

2026-06-26 21:25 UTC}

Ozone Zeolite 2 GT ML (2023)

General Information

Manufacturer	Ozone Paragliders LTD
Model	Zeolite 2 GT
Year	2023
Size	ML
Production date	2023-11
Line chart	Open
Total airtime	n/a
Line set airtime	n/a
Tolerance	+/- 10mm (Review)

Data integrity & access	Contains imported values Contains manual values

Settings

Manufacturer tolerance

Correction value

The deviation of the measured values from the nominal values is between -22 and -41mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

AR1

A1a

A2a

A3a

A4a

A1b

A2b

A3b

A4b

BR1

AR2

A5a

A6a

A7a

A8a

A5b

A6b

A7b

A8b

BR2

AR3

A10

A11

A12

A13

B12

B13

BR3

B10

B11

AR1

A1a

A2a

A3a

A4a

A1b

A2b

A3b

A4b

BR1

AR2

A5a

A6a

A7a

A8a

A5b

A6b

A7b

A8b

BR2

AR3

A10

A11

A12

A13

B12

B13

BR3

B10

B11

Offsets relative to median diff (-29)

AR1

BR1

AR2

BR2

AR3

BR3

AR1

BR1

AR2

BR2

AR3

BR3

Left riser

AR1

nom:

7567.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR1

Formula of calculation:

sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A1a

nom:

7664

rdg:

7630

diff:

A2a

nom:

7557

rdg:

7525

diff:

A3a

nom:

7520

rdg:

7491

diff:

A4a

nom:

7554

rdg:

7520

diff:

A1b

nom:

7651

rdg:

7620

diff:

A2b

nom:

7542

rdg:

7510

diff:

A3b

nom:

7507

rdg:

7477

diff:

A4b

nom:

7543

rdg:

7508

diff:

BR1

nom:

7563.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4,C1,C2,C3,C4) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7616

rdg:

7576

diff:

nom:

7508

rdg:

7481

diff:

nom:

7473

rdg:

7446

diff:

nom:

7506

rdg:

7475

diff:

nom:

7692

rdg:

7666

diff:

nom:

7589

rdg:

7562

diff:

nom:

7550

rdg:

7521

diff:

nom:

7577

rdg:

7543

diff:

AR2

nom:

7320.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR2

Formula of calculation:

sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A5a

nom:

7467

rdg:

7444

diff:

A6a

nom:

7321

rdg:

7294

diff:

A7a

nom:

7249

rdg:

7225

diff:

A8a

nom:

7261

rdg:

7236

diff:

A5b

nom:

7457

rdg:

7431

diff:

A6b

nom:

7312

rdg:

7289

diff:

A7b

nom:

7242

rdg:

7217

diff:

A8b

nom:

7258

rdg:

7232

diff:

BR2

nom:

7336.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR2

Formula of calculation:

sum(B5,B6,B7,B8,C5,C6,C7,C8) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7431

rdg:

7401

diff:

nom:

7288

rdg:

7259

diff:

nom:

7216

rdg:

7187

diff:

nom:

7229

rdg:

7200

diff:

nom:

7527

rdg:

7498

diff:

nom:

7382

rdg:

7352

diff:

nom:

7304

rdg:

7273

diff:

nom:

7311

rdg:

7281

diff:

AR3

nom:

6957.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR3

Formula of calculation:

sum(A9,A10,A11) / 3

AR3 contains suspension points that are excluded from the average:

A12,A13,B12,B13

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7070

rdg:

7044

diff:

A10

nom:

6938

rdg:

6916

diff:

A11

nom:

6865

rdg:

6834

diff:

A12

nom:

6767

rdg:

6736

diff:

A13

nom:

6746

rdg:

6715

diff:

B12

nom:

6789

rdg:

6755

diff:

B13

nom:

6771

rdg:

6738

diff:

BR3

nom:

6972.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR3

Formula of calculation:

sum(B9,B10,B11) / 3

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7063

rdg:

7031

diff:

B10

nom:

6952

rdg:

6924

diff:

B11

nom:

6901

rdg:

6868

diff:

Right riser

AR1

nom:

7567.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR1

Formula of calculation:

sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A1a

nom:

7664

rdg:

7634

diff:

A2a

nom:

7557

rdg:

7527

diff:

A3a

nom:

7520

rdg:

7491

diff:

A4a

nom:

7554

rdg:

7518

diff:

A1b

nom:

7651

rdg:

7614

diff:

A2b

nom:

7542

rdg:

7510

diff:

A3b

nom:

7507

rdg:

7475

diff:

A4b

nom:

7543

rdg:

7506

diff:

BR1

nom:

7563.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4,C1,C2,C3,C4) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7616

rdg:

7582

diff:

nom:

7508

rdg:

7480

diff:

nom:

7473

rdg:

7446

diff:

nom:

7506

rdg:

7479

diff:

nom:

7692

rdg:

7666

diff:

nom:

7589

rdg:

7567

diff:

nom:

7550

rdg:

7524

diff:

nom:

7577

rdg:

7552

diff:

AR2

nom:

7320.88

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR2

Formula of calculation:

sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A5a

nom:

7467

rdg:

7439

diff:

A6a

nom:

7321

rdg:

7294

diff:

A7a

nom:

7249

rdg:

7221

diff:

A8a

nom:

7261

rdg:

7231

diff:

A5b

nom:

7457

rdg:

7431

diff:

A6b

nom:

7312

rdg:

7287

diff:

A7b

nom:

7242

rdg:

7215

diff:

A8b

nom:

7258

rdg:

7228

diff:

BR2

nom:

7336.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR2

Formula of calculation:

sum(B5,B6,B7,B8,C5,C6,C7,C8) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7431

rdg:

7401

diff:

nom:

7288

rdg:

7261

diff:

nom:

7216

rdg:

7187

diff:

nom:

7229

rdg:

7202

diff:

nom:

7527

rdg:

7503

diff:

nom:

7382

rdg:

7354

diff:

nom:

7304

rdg:

7276

diff:

nom:

7311

rdg:

7282

diff:

AR3

nom:

6957.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR3

Formula of calculation:

sum(A9,A10,A11) / 3

AR3 contains suspension points that are excluded from the average:

A12,A13,B12,B13

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7070

rdg:

7035

diff:

A10

nom:

6938

rdg:

6911

diff:

A11

nom:

6865

rdg:

6828

diff:

A12

nom:

6767

rdg:

6726

diff:

A13

nom:

6746

rdg:

6705

diff:

B12

nom:

6789

rdg:

6753

diff:

B13

nom:

6771

rdg:

6731

diff:

BR3

nom:

6972.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR3

Formula of calculation:

sum(B9,B10,B11) / 3

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7063

rdg:

7032

diff:

B10

nom:

6952

rdg:

6920

diff:

B11

nom:

6901

rdg:

6864

diff:

Help

AoI

The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.

ref

The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:

groups and rows	Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points	Clicking the white area beneath the suspension point name

nom

The nominal length between suspension point and main riser loop.

rdg

The actual reading from your measurement device. When measuring, rdg is the input field.

diff

The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.

colors

Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.

status

Color coded dots are shown for manual, imported & laser values

Also take a look at the Manual

Continue trimming procedure

inject html