Result

2026-07-04 15:32 UTC

SOL Paragliders Flexus 2 XXL (2021)

General Information
ManufacturerSOL Sports Ind & Com LTDA
ModelFlexus 2
Year2021
SizeXXL
Line chartOpen
Total airtimen/a
Line set airtimen/a
Tolerance +/- 10mm (Review)
Data integrity & access

    Settings

    The deviation of the measured values from the nominal values is between -27 and -76mm. Adjust the value according to your measuring set-up.
    Put a positive value if readings are too short.
    Put a negative value if readings are too long.

    Wing as seen from above in flight

    AR3

    A14
    A13
    A12
    A11

    BR3

    B14
    B13
    B12
    B11

    CR3

    C14
    C13
    C12
    C11
    D14
    D13
    D12
    D11

    AR2

    A10
    A9
    A8
    A7

    BR2

    B10
    B9
    B8
    B7

    CR2

    C10
    C9
    C8
    C7
    D10
    D9
    D8
    D7

    AR1

    A6
    A5
    A4
    A3

    BR1

    B6
    B5
    B4
    B3

    CR1

    C6
    C5
    C4
    C3

    SRB

    A2
    A1
    B2
    B1
    C2
    C1

    AR3

    A14
    A13
    A12
    A11

    BR3

    B14
    B13
    B12
    B11

    CR3

    C14
    C13
    C12
    C11
    D14
    D13
    D12
    D11

    AR2

    A10
    A9
    A8
    A7

    BR2

    B10
    B9
    B8
    B7

    CR2

    C10
    C9
    C8
    C7
    D10
    D9
    D8
    D7

    AR1

    A6
    A5
    A4
    A3

    BR1

    B6
    B5
    B4
    B3

    CR1

    C6
    C5
    C4
    C3

    SRB

    A2
    A1
    B2
    B1
    C2
    C1
    Offsets relative to median diff (-46)
    AR3
    BR3
    CR3
    AR2
    BR2
    CR2
    AR1
    BR1
    CR1
    SRB
    AR3
    BR3
    CR3
    AR2
    BR2
    CR2
    AR1
    BR1
    CR1
    SRB

    Left riser

    nom:
    7940.00
    rdg:
    diff:

    Averages of group AR3

    Formula of calculation:

    sum(A14,A13,A12,A11) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    A14
    nom:
    7984
    rdg:
    7935
    diff:
    A13
    nom:
    7935
    rdg:
    7886
    diff:
    A12
    nom:
    7909
    rdg:
    7855
    diff:
    A11
    nom:
    7932
    rdg:
    7879
    diff:
    nom:
    7852.75
    rdg:
    diff:

    Averages of group BR3

    Formula of calculation:

    sum(B14,B13,B12,B11) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    B14
    nom:
    7895
    rdg:
    7839
    diff:
    B13
    nom:
    7846
    rdg:
    7792
    diff:
    B12
    nom:
    7822
    rdg:
    7769
    diff:
    B11
    nom:
    7848
    rdg:
    7794
    diff:
    nom:
    8023.88
    rdg:
    diff:

    Averages of group CR3

    Formula of calculation:

    sum(C14,C13,C12,C11,D14,D13,D12,D11) / 8

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    C14
    nom:
    8011
    rdg:
    7972
    diff:
    C13
    nom:
    7962
    rdg:
    7924
    diff:
    C12
    nom:
    7937
    rdg:
    7897
    diff:
    C11
    nom:
    7960
    rdg:
    7923
    diff:
    D14
    nom:
    8124
    rdg:
    8080
    diff:
    D13
    nom:
    8077
    rdg:
    8034
    diff:
    D12
    nom:
    8050
    rdg:
    7999
    diff:
    D11
    nom:
    8070
    rdg:
    8019
    diff:
    nom:
    7877.75
    rdg:
    diff:

    Averages of group AR2

    Formula of calculation:

    sum(A10,A9,A8,A7) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    A10
    nom:
    7908
    rdg:
    7871
    diff:
    A9
    nom:
    7871
    rdg:
    7833
    diff:
    A8
    nom:
    7856
    rdg:
    7814
    diff:
    A7
    nom:
    7876
    rdg:
    7830
    diff:
    nom:
    7807.25
    rdg:
    diff:

    Averages of group BR2

    Formula of calculation:

    sum(B10,B9,B8,B7) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    B10
    nom:
    7829
    rdg:
    7778
    diff:
    B9
    nom:
    7796
    rdg:
    7747
    diff:
    B8
    nom:
    7790
    rdg:
    7734
    diff:
    B7
    nom:
    7814
    rdg:
    7755
    diff:
    nom:
    7954.88
    rdg:
    diff:

    Averages of group CR2

    Formula of calculation:

    sum(C10,C9,C8,C7,D10,D9,D8,D7) / 8

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    C10
    nom:
    7938
    rdg:
    7894
    diff:
    C9
    nom:
    7901
    rdg:
    7853
    diff:
    C8
    nom:
    7887
    rdg:
    7844
    diff:
    C7
    nom:
    7901
    rdg:
    7867
    diff:
    D10
    nom:
    8043
    rdg:
    7995
    diff:
    D9
    nom:
    8003
    rdg:
    7956
    diff:
    D8
    nom:
    7980
    rdg:
    7929
    diff:
    D7
    nom:
    7986
    rdg:
    7937
    diff:
    nom:
    7733.00
    rdg:
    diff:

    Averages of group AR1

    Formula of calculation:

    sum(A6,A5,A4,A3) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    A6
    nom:
    7830
    rdg:
    7775
    diff:
    A5
    nom:
    7774
    rdg:
    7719
    diff:
    A4
    nom:
    7684
    rdg:
    7627
    diff:
    A3
    nom:
    7644
    rdg:
    7591
    diff:
    nom:
    7690.50
    rdg:
    diff:

    Averages of group BR1

    Formula of calculation:

    sum(B6,B5,B4,B3) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    B6
    nom:
    7776
    rdg:
    7700
    diff:
    B5
    nom:
    7726
    rdg:
    7652
    diff:
    B4
    nom:
    7647
    rdg:
    7571
    diff:
    B3
    nom:
    7613
    rdg:
    7543
    diff:
    nom:
    7759.00
    rdg:
    diff:

    Averages of group CR1

    Formula of calculation:

    sum(C6,C5,C4,C3) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    C6
    nom:
    7861
    rdg:
    7811
    diff:
    C5
    nom:
    7801
    rdg:
    7748
    diff:
    C4
    nom:
    7709
    rdg:
    7658
    diff:
    C3
    nom:
    7665
    rdg:
    7616
    diff:
    nom:
    7339.00
    rdg:
    diff:

    Averages of group SRB

    Formula of calculation:

    sum(A2,A1,B2,B1,C2,C1) / 6

    Statistics of "SOL 1.0mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    11 8 1.5 46/100 high
    7 13 1.7 27/100 medium
     
    A2
    nom:
    7438
    rdg:
    7390
    diff:
    A1
    nom:
    7235
    rdg:
    7190
    diff:
    B2
    nom:
    7392
    rdg:
    7340
    diff:
    B1
    nom:
    7237
    rdg:
    7186
    diff:
    C2
    nom:
    7442
    rdg:
    7389
    diff:
    C1
    nom:
    7290
    rdg:
    7235
    diff:

    Right riser

    nom:
    7940.00
    rdg:
    diff:

    Averages of group AR3

    Formula of calculation:

    sum(A14,A13,A12,A11) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    A14
    nom:
    7984
    rdg:
    7937
    diff:
    A13
    nom:
    7935
    rdg:
    7890
    diff:
    A12
    nom:
    7909
    rdg:
    7862
    diff:
    A11
    nom:
    7932
    rdg:
    7885
    diff:
    nom:
    7852.75
    rdg:
    diff:

    Averages of group BR3

    Formula of calculation:

    sum(B14,B13,B12,B11) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    B14
    nom:
    7895
    rdg:
    7854
    diff:
    B13
    nom:
    7846
    rdg:
    7806
    diff:
    B12
    nom:
    7822
    rdg:
    7779
    diff:
    B11
    nom:
    7848
    rdg:
    7803
    diff:
    nom:
    8023.88
    rdg:
    diff:

    Averages of group CR3

    Formula of calculation:

    sum(C14,C13,C12,C11,D14,D13,D12,D11) / 8

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    C14
    nom:
    8011
    rdg:
    7963
    diff:
    C13
    nom:
    7962
    rdg:
    7912
    diff:
    C12
    nom:
    7937
    rdg:
    7895
    diff:
    C11
    nom:
    7960
    rdg:
    7911
    diff:
    D14
    nom:
    8124
    rdg:
    8066
    diff:
    D13
    nom:
    8077
    rdg:
    8021
    diff:
    D12
    nom:
    8050
    rdg:
    7992
    diff:
    D11
    nom:
    8070
    rdg:
    8012
    diff:
    nom:
    7877.75
    rdg:
    diff:

    Averages of group AR2

    Formula of calculation:

    sum(A10,A9,A8,A7) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    A10
    nom:
    7908
    rdg:
    7874
    diff:
    A9
    nom:
    7871
    rdg:
    7833
    diff:
    A8
    nom:
    7856
    rdg:
    7818
    diff:
    A7
    nom:
    7876
    rdg:
    7834
    diff:
    nom:
    7807.25
    rdg:
    diff:

    Averages of group BR2

    Formula of calculation:

    sum(B10,B9,B8,B7) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    B10
    nom:
    7829
    rdg:
    7795
    diff:
    B9
    nom:
    7796
    rdg:
    7765
    diff:
    B8
    nom:
    7790
    rdg:
    7753
    diff:
    B7
    nom:
    7814
    rdg:
    7776
    diff:
    nom:
    7954.88
    rdg:
    diff:

    Averages of group CR2

    Formula of calculation:

    sum(C10,C9,C8,C7,D10,D9,D8,D7) / 8

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    C10
    nom:
    7938
    rdg:
    7904
    diff:
    C9
    nom:
    7901
    rdg:
    7874
    diff:
    C8
    nom:
    7887
    rdg:
    7858
    diff:
    C7
    nom:
    7901
    rdg:
    7869
    diff:
    D10
    nom:
    8043
    rdg:
    8003
    diff:
    D9
    nom:
    8003
    rdg:
    7960
    diff:
    D8
    nom:
    7980
    rdg:
    7936
    diff:
    D7
    nom:
    7986
    rdg:
    7939
    diff:
    nom:
    7733.00
    rdg:
    diff:

    Averages of group AR1

    Formula of calculation:

    sum(A6,A5,A4,A3) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    A6
    nom:
    7830
    rdg:
    7786
    diff:
    A5
    nom:
    7774
    rdg:
    7728
    diff:
    A4
    nom:
    7684
    rdg:
    7641
    diff:
    A3
    nom:
    7644
    rdg:
    7601
    diff:
    nom:
    7690.50
    rdg:
    diff:

    Averages of group BR1

    Formula of calculation:

    sum(B6,B5,B4,B3) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    B6
    nom:
    7776
    rdg:
    7728
    diff:
    B5
    nom:
    7726
    rdg:
    7681
    diff:
    B4
    nom:
    7647
    rdg:
    7604
    diff:
    B3
    nom:
    7613
    rdg:
    7576
    diff:
    nom:
    7759.00
    rdg:
    diff:

    Averages of group CR1

    Formula of calculation:

    sum(C6,C5,C4,C3) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    C6
    nom:
    7861
    rdg:
    7820
    diff:
    C5
    nom:
    7801
    rdg:
    7758
    diff:
    C4
    nom:
    7709
    rdg:
    7667
    diff:
    C3
    nom:
    7665
    rdg:
    7628
    diff:
    nom:
    7339.00
    rdg:
    diff:

    Averages of group SRB

    Formula of calculation:

    sum(A2,A1,B2,B1,C2,C1) / 6

    Statistics of "SOL 1.0mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    11 8 1.5 46/100 high
    7 13 1.7 27/100 medium
     
    A2
    nom:
    7438
    rdg:
    7405
    diff:
    A1
    nom:
    7235
    rdg:
    7199
    diff:
    B2
    nom:
    7392
    rdg:
    7354
    diff:
    B1
    nom:
    7237
    rdg:
    7196
    diff:
    C2
    nom:
    7442
    rdg:
    7400
    diff:
    C1
    nom:
    7290
    rdg:
    7249
    diff:
     Help
    AoI The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.
    ref The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
    You can select/change the ref by:
    groups and rows Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
    points Clicking the white area beneath the suspension point name
    nom The nominal length between suspension point and main riser loop.
    rdg The actual reading from your measurement device. When measuring, rdg is the input field.
    diff The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.
    colors Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.
    status Color coded dots are shown for manual, imported & laser values
    Also take a look at the Manual

    Continue trimming procedure

    inject html