Result

2026-07-17 17:16 UTC 2026-07-17 17:06 UTC  … 

SOL Paragliders Flexus 2 XL (2021)

General Information
ManufacturerSOL Sports Ind & Com LTDA
ModelFlexus 2
Year2021
SizeXL
Line chartOpen
Total airtimen/a
Line set airtimen/a
Tolerance +/- 10mm (Review)
Data integrity & access

    Settings

    The deviation of the measured values from the nominal values is between -27 and -60mm. Adjust the value according to your measuring set-up.
    Put a positive value if readings are too short.
    Put a negative value if readings are too long.

    Wing as seen from above in flight

    AR3

    A14
    A13
    A12
    A11

    BR3

    B14
    B13
    B12
    B11

    CR3

    C14
    C13
    C12
    C11
    D14
    D13
    D12
    D11

    AR2

    A10
    A9
    A8
    A7

    BR2

    B10
    B9
    B8
    B7

    CR2

    C10
    C9
    C8
    C7
    D10
    D9
    D8
    D7

    AR1

    A6
    A5
    A4
    A3

    BR1

    B6
    B5
    B4
    B3

    CR1

    C6
    C5
    C4
    C3

    SRB

    A2
    A1
    B2
    B1
    C2
    C1

    AR3

    A14
    A13
    A12
    A11

    BR3

    B14
    B13
    B12
    B11

    CR3

    C14
    C13
    C12
    C11
    D14
    D13
    D12
    D11

    AR2

    A10
    A9
    A8
    A7

    BR2

    B10
    B9
    B8
    B7

    CR2

    C10
    C9
    C8
    C7
    D10
    D9
    D8
    D7

    AR1

    A6
    A5
    A4
    A3

    BR1

    B6
    B5
    B4
    B3

    CR1

    C6
    C5
    C4
    C3

    SRB

    A2
    A1
    B2
    B1
    C2
    C1
    Offsets relative to median diff (-37)
    AR3
    BR3
    CR3
    AR2
    BR2
    CR2
    AR1
    BR1
    CR1
    SRB
    AR3
    BR3
    CR3
    AR2
    BR2
    CR2
    AR1
    BR1
    CR1
    SRB

    Left riser

    nom:
    7662.50
    rdg:
    diff:

    Averages of group AR3

    Formula of calculation:

    sum(A14,A13,A12,A11) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    A14
    nom:
    7706
    rdg:
    7675
    diff:
    A13
    nom:
    7658
    rdg:
    7626
    diff:
    A12
    nom:
    7632
    rdg:
    7601
    diff:
    A11
    nom:
    7654
    rdg:
    7627
    diff:
    nom:
    7578.50
    rdg:
    diff:

    Averages of group BR3

    Formula of calculation:

    sum(B14,B13,B12,B11) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    B14
    nom:
    7620
    rdg:
    7588
    diff:
    B13
    nom:
    7572
    rdg:
    7539
    diff:
    B12
    nom:
    7549
    rdg:
    7517
    diff:
    B11
    nom:
    7573
    rdg:
    7541
    diff:
    nom:
    7743.00
    rdg:
    diff:

    Averages of group CR3

    Formula of calculation:

    sum(C14,C13,C12,C11,D14,D13,D12,D11) / 8

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    C14
    nom:
    7731
    rdg:
    7691
    diff:
    C13
    nom:
    7684
    rdg:
    7649
    diff:
    C12
    nom:
    7659
    rdg:
    7622
    diff:
    C11
    nom:
    7681
    rdg:
    7651
    diff:
    D14
    nom:
    7840
    rdg:
    7787
    diff:
    D13
    nom:
    7794
    rdg:
    7752
    diff:
    D12
    nom:
    7768
    rdg:
    7731
    diff:
    D11
    nom:
    7787
    rdg:
    7748
    diff:
    nom:
    7601.75
    rdg:
    diff:

    Averages of group AR2

    Formula of calculation:

    sum(A10,A9,A8,A7) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    A10
    nom:
    7631
    rdg:
    7597
    diff:
    A9
    nom:
    7595
    rdg:
    7561
    diff:
    A8
    nom:
    7581
    rdg:
    7539
    diff:
    A7
    nom:
    7600
    rdg:
    7561
    diff:
    nom:
    7533.50
    rdg:
    diff:

    Averages of group BR2

    Formula of calculation:

    sum(B10,B9,B8,B7) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    B10
    nom:
    7555
    rdg:
    7517
    diff:
    B9
    nom:
    7522
    rdg:
    7486
    diff:
    B8
    nom:
    7517
    rdg:
    7477
    diff:
    B7
    nom:
    7540
    rdg:
    7501
    diff:
    nom:
    7674.63
    rdg:
    diff:

    Averages of group CR2

    Formula of calculation:

    sum(C10,C9,C8,C7,D10,D9,D8,D7) / 8

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    C10
    nom:
    7659
    rdg:
    7622
    diff:
    C9
    nom:
    7623
    rdg:
    7590
    diff:
    C8
    nom:
    7609
    rdg:
    7573
    diff:
    C7
    nom:
    7622
    rdg:
    7589
    diff:
    D10
    nom:
    7760
    rdg:
    7723
    diff:
    D9
    nom:
    7721
    rdg:
    7686
    diff:
    D8
    nom:
    7699
    rdg:
    7655
    diff:
    D7
    nom:
    7704
    rdg:
    7664
    diff:
    nom:
    7461.50
    rdg:
    diff:

    Averages of group AR1

    Formula of calculation:

    sum(A6,A5,A4,A3) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    A6
    nom:
    7555
    rdg:
    7521
    diff:
    A5
    nom:
    7501
    rdg:
    7464
    diff:
    A4
    nom:
    7414
    rdg:
    7377
    diff:
    A3
    nom:
    7376
    rdg:
    7339
    diff:
    nom:
    7420.25
    rdg:
    diff:

    Averages of group BR1

    Formula of calculation:

    sum(B6,B5,B4,B3) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    B6
    nom:
    7503
    rdg:
    7464
    diff:
    B5
    nom:
    7454
    rdg:
    7415
    diff:
    B4
    nom:
    7378
    rdg:
    7336
    diff:
    B3
    nom:
    7346
    rdg:
    7306
    diff:
    nom:
    7485.50
    rdg:
    diff:

    Averages of group CR1

    Formula of calculation:

    sum(C6,C5,C4,C3) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    C6
    nom:
    7584
    rdg:
    7541
    diff:
    C5
    nom:
    7526
    rdg:
    7485
    diff:
    C4
    nom:
    7437
    rdg:
    7399
    diff:
    C3
    nom:
    7395
    rdg:
    7363
    diff:
    nom:
    7080.67
    rdg:
    diff:

    Averages of group SRB

    Formula of calculation:

    sum(A2,A1,B2,B1,C2,C1) / 6

    Statistics of "SOL 1.0mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    11 8 1.5 46/100 high
    7 13 1.7 27/100 medium
     
    A2
    nom:
    7176
    rdg:
    7125
    diff:
    A1
    nom:
    6981
    rdg:
    6933
    diff:
    B2
    nom:
    7132
    rdg:
    7083
    diff:
    B1
    nom:
    6983
    rdg:
    6931
    diff:
    C2
    nom:
    7179
    rdg:
    7130
    diff:
    C1
    nom:
    7033
    rdg:
    6982
    diff:

    Right riser

    nom:
    7662.50
    rdg:
    diff:

    Averages of group AR3

    Formula of calculation:

    sum(A14,A13,A12,A11) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    A14
    nom:
    7706
    rdg:
    7674
    diff:
    A13
    nom:
    7658
    rdg:
    7628
    diff:
    A12
    nom:
    7632
    rdg:
    7602
    diff:
    A11
    nom:
    7654
    rdg:
    7623
    diff:
    nom:
    7578.50
    rdg:
    diff:

    Averages of group BR3

    Formula of calculation:

    sum(B14,B13,B12,B11) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    B14
    nom:
    7620
    rdg:
    7584
    diff:
    B13
    nom:
    7572
    rdg:
    7540
    diff:
    B12
    nom:
    7549
    rdg:
    7514
    diff:
    B11
    nom:
    7573
    rdg:
    7539
    diff:
    nom:
    7743.00
    rdg:
    diff:

    Averages of group CR3

    Formula of calculation:

    sum(C14,C13,C12,C11,D14,D13,D12,D11) / 8

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    C14
    nom:
    7731
    rdg:
    7692
    diff:
    C13
    nom:
    7684
    rdg:
    7651
    diff:
    C12
    nom:
    7659
    rdg:
    7621
    diff:
    C11
    nom:
    7681
    rdg:
    7645
    diff:
    D14
    nom:
    7840
    rdg:
    7798
    diff:
    D13
    nom:
    7794
    rdg:
    7754
    diff:
    D12
    nom:
    7768
    rdg:
    7721
    diff:
    D11
    nom:
    7787
    rdg:
    7744
    diff:
    nom:
    7601.75
    rdg:
    diff:

    Averages of group AR2

    Formula of calculation:

    sum(A10,A9,A8,A7) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    A10
    nom:
    7631
    rdg:
    7590
    diff:
    A9
    nom:
    7595
    rdg:
    7555
    diff:
    A8
    nom:
    7581
    rdg:
    7538
    diff:
    A7
    nom:
    7600
    rdg:
    7557
    diff:
    nom:
    7533.50
    rdg:
    diff:

    Averages of group BR2

    Formula of calculation:

    sum(B10,B9,B8,B7) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    B10
    nom:
    7555
    rdg:
    7519
    diff:
    B9
    nom:
    7522
    rdg:
    7486
    diff:
    B8
    nom:
    7517
    rdg:
    7479
    diff:
    B7
    nom:
    7540
    rdg:
    7503
    diff:
    nom:
    7674.63
    rdg:
    diff:

    Averages of group CR2

    Formula of calculation:

    sum(C10,C9,C8,C7,D10,D9,D8,D7) / 8

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    C10
    nom:
    7659
    rdg:
    7631
    diff:
    C9
    nom:
    7623
    rdg:
    7593
    diff:
    C8
    nom:
    7609
    rdg:
    7579
    diff:
    C7
    nom:
    7622
    rdg:
    7592
    diff:
    D10
    nom:
    7760
    rdg:
    7713
    diff:
    D9
    nom:
    7721
    rdg:
    7685
    diff:
    D8
    nom:
    7699
    rdg:
    7662
    diff:
    D7
    nom:
    7704
    rdg:
    7670
    diff:
    nom:
    7461.50
    rdg:
    diff:

    Averages of group AR1

    Formula of calculation:

    sum(A6,A5,A4,A3) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    A6
    nom:
    7555
    rdg:
    7519
    diff:
    A5
    nom:
    7501
    rdg:
    7468
    diff:
    A4
    nom:
    7414
    rdg:
    7377
    diff:
    A3
    nom:
    7376
    rdg:
    7339
    diff:
    nom:
    7420.25
    rdg:
    diff:

    Averages of group BR1

    Formula of calculation:

    sum(B6,B5,B4,B3) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    B6
    nom:
    7503
    rdg:
    7448
    diff:
    B5
    nom:
    7454
    rdg:
    7403
    diff:
    B4
    nom:
    7378
    rdg:
    7339
    diff:
    B3
    nom:
    7346
    rdg:
    7309
    diff:
    nom:
    7485.50
    rdg:
    diff:

    Averages of group CR1

    Formula of calculation:

    sum(C6,C5,C4,C3) / 4

    Statistics of "SOL 1.6mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    25 11 2.48 41/100 high
    5 15 2.32 50/100 high
     
    C6
    nom:
    7584
    rdg:
    7541
    diff:
    C5
    nom:
    7526
    rdg:
    7484
    diff:
    C4
    nom:
    7437
    rdg:
    7396
    diff:
    C3
    nom:
    7395
    rdg:
    7354
    diff:
    nom:
    7080.67
    rdg:
    diff:

    Averages of group SRB

    Formula of calculation:

    sum(A2,A1,B2,B1,C2,C1) / 6

    Statistics of "SOL 1.0mm"

    Evidence must be high for the system to show colored dots at all.

    Evidence levels
    • Low: 3 datasets found and quality is below 18
    • Medium: 3 datasets found and quality higher than 17
    • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

    The color of the dot itself is based on the spread.

    Color codes
    • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
    • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
    • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

    The following table shows statistics acquired by user measurements.

    From
    To Count Median Spread Quality Evidence
    11 8 1.5 46/100 high
    7 13 1.7 27/100 medium
     
    A2
    nom:
    7176
    rdg:
    7125
    diff:
    A1
    nom:
    6981
    rdg:
    6930
    diff:
    B2
    nom:
    7132
    rdg:
    7078
    diff:
    B1
    nom:
    6983
    rdg:
    6928
    diff:
    C2
    nom:
    7179
    rdg:
    7119
    diff:
    C1
    nom:
    7033
    rdg:
    6981
    diff:
     Help
    AoI The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.
    ref The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
    You can select/change the ref by:
    groups and rows Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
    points Clicking the white area beneath the suspension point name
    nom The nominal length between suspension point and main riser loop.
    rdg The actual reading from your measurement device. When measuring, rdg is the input field.
    diff The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.
    colors Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.
    status Color coded dots are shown for manual, imported & laser values
    Also take a look at the Manual

    Continue trimming procedure

    inject html