Result

2024-05-30 08:11 UTC 2024-05-19 18:41 UTC  … 

Swing Libra RS ML (2023)

General Information
ManufacturerSWING FlugsportgerÃĪte GmbH
ModelLibra RS
Year2023
SizeML
Production date2024-02
Line chartOpen
Total airtime5h
Line set airtime5h
Tolerance +/- 10mm (Review)
Data integrity & access
  • Checksum valid

Settings

The deviation of the measured values from the nominal values is between 0 and -22mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.
Wing as seen from above in flight

AM1

aa1
aa2
aa3
aa4
ab1
ab2
ab3
ab4

BM1

bb1
bb2
bb3
bb4
bc1
bc2
bc3
bc4

AM2

aa5
aa6
aa7
aa8
ab5
ab6
ab7
ab8

BM2

bb5
bb6
bb7
bb8
bc5
bc6
bc7
bc8

AM3

aa9
aa10
af11
af12
af13
af14
ab9
ab10
aa11
aa12
aa13
aa14

BM3

bb9
bb10
bb11
bb12
bb13
bb14
bc9
bc10
bc11
bc12
bc13
bc14

ST1

aa15
aa16
aa17
bb15
bb16
bb17

AM1

aa1
aa2
aa3
aa4
ab1
ab2
ab3
ab4

BM1

bb1
bb2
bb3
bb4
bc1
bc2
bc3
bc4

AM2

aa5
aa6
aa7
aa8
ab5
ab6
ab7
ab8

BM2

bb5
bb6
bb7
bb8
bc5
bc6
bc7
bc8

AM3

aa9
aa10
af11
af12
af13
af14
ab9
ab10
aa11
aa12
aa13
aa14

BM3

bb9
bb10
bb11
bb12
bb13
bb14
bc9
bc10
bc11
bc12
bc13
bc14

ST1

aa15
aa16
aa17
bb15
bb16
bb17
Offsets relative to median diff (-8)
AM1
BM1
AM2
BM2
AM3
BM3
ST1
AM1
BM1
AM2
BM2
AM3
BM3
ST1

Left riser

nom:
7841.25
rdg:
diff:

Averages of group AM1

Formula of calculation:

sum(aa1,aa2,aa3,aa4,ab1,ab2,ab3,ab4) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
aa1
nom:
7895
rdg:
7873
diff:
aa2
nom:
7850
rdg:
7834
diff:
aa3
nom:
7820
rdg:
7803
diff:
aa4
nom:
7850
rdg:
7834
diff:
ab1
nom:
7870
rdg:
7852
diff:
ab2
nom:
7825
rdg:
7811
diff:
ab3
nom:
7795
rdg:
7780
diff:
ab4
nom:
7825
rdg:
7808
diff:
nom:
7855.63
rdg:
diff:

Averages of group BM1

Formula of calculation:

sum(bb1,bb2,bb3,bb4,bc1,bc2,bc3,bc4) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
bb1
nom:
7840
rdg:
7827
diff:
bb2
nom:
7790
rdg:
7779
diff:
bb3
nom:
7765
rdg:
7757
diff:
bb4
nom:
7795
rdg:
7790
diff:
bc1
nom:
7955
rdg:
7945
diff:
bc2
nom:
7910
rdg:
7903
diff:
bc3
nom:
7885
rdg:
7876
diff:
bc4
nom:
7905
rdg:
7898
diff:
nom:
7725.00
rdg:
diff:

Averages of group AM2

Formula of calculation:

sum(aa5,aa6,aa7,aa8,ab5,ab6,ab7,ab8) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
aa5
nom:
7790
rdg:
7769
diff:
aa6
nom:
7745
rdg:
7724
diff:
aa7
nom:
7695
rdg:
7674
diff:
aa8
nom:
7710
rdg:
7689
diff:
ab5
nom:
7770
rdg:
7750
diff:
ab6
nom:
7725
rdg:
7706
diff:
ab7
nom:
7670
rdg:
7652
diff:
ab8
nom:
7695
rdg:
7674
diff:
nom:
7735.00
rdg:
diff:

Averages of group BM2

Formula of calculation:

sum(bb5,bb6,bb7,bb8,bc5,bc6,bc7,bc8) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
bb5
nom:
7740
rdg:
7728
diff:
bb6
nom:
7690
rdg:
7679
diff:
bb7
nom:
7640
rdg:
7633
diff:
bb8
nom:
7660
rdg:
7655
diff:
bc5
nom:
7850
rdg:
7839
diff:
bc6
nom:
7805
rdg:
7810
diff:
bc7
nom:
7745
rdg:
7735
diff:
bc8
nom:
7750
rdg:
7761
diff:
nom:
7512.08
rdg:
diff:

Averages of group AM3

Formula of calculation:

sum(aa9,aa10,af11,af12,af13,af14,ab9,ab10,aa11,aa12,aa13,aa14) / 12

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
aa9
nom:
7630
rdg:
7625
diff:
aa10
nom:
7580
rdg:
7572
diff:
af11
nom:
7555
rdg:
7553
diff:
af12
nom:
7545
rdg:
7543
diff:
af13
nom:
7480
rdg:
7480
diff:
af14
nom:
7475
rdg:
7474
diff:
ab9
nom:
7605
rdg:
7598
diff:
ab10
nom:
7560
rdg:
7552
diff:
aa11
nom:
7465
rdg:
7460
diff:
aa12
nom:
7445
rdg:
7441
diff:
aa13
nom:
7400
rdg:
7396
diff:
aa14
nom:
7405
rdg:
7399
diff:
nom:
7502.08
rdg:
diff:

Averages of group BM3

Formula of calculation:

sum(bb9,bb10,bb11,bb12,bb13,bb14,bc9,bc10,bc11,bc12,bc13,bc14) / 12

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
bb9
nom:
7610
rdg:
7606
diff:
bb10
nom:
7570
rdg:
7565
diff:
bb11
nom:
7435
rdg:
7433
diff:
bb12
nom:
7410
rdg:
7409
diff:
bb13
nom:
7365
rdg:
7365
diff:
bb14
nom:
7350
rdg:
7348
diff:
bc9
nom:
7700
rdg:
7700
diff:
bc10
nom:
7660
rdg:
7659
diff:
bc11
nom:
7535
rdg:
7534
diff:
bc12
nom:
7510
rdg:
7510
diff:
bc13
nom:
7445
rdg:
7443
diff:
bc14
nom:
7435
rdg:
7431
diff:
nom:
7153.33
rdg:
diff:

Averages of group ST1

Formula of calculation:

sum(aa15,aa16,aa17,bb15,bb16,bb17) / 6

Statistics of "04"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
aa15
nom:
7190
rdg:
7177
diff:
aa16
nom:
7140
rdg:
7128
diff:
aa17
nom:
7090
rdg:
7079
diff:
bb15
nom:
7200
rdg:
7188
diff:
bb16
nom:
7180
rdg:
7168
diff:
bb17
nom:
7120
rdg:
7111
diff:

Right riser

nom:
7841.25
rdg:
diff:

Averages of group AM1

Formula of calculation:

sum(aa1,aa2,aa3,aa4,ab1,ab2,ab3,ab4) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
aa1
nom:
7895
rdg:
7877
diff:
aa2
nom:
7850
rdg:
7835
diff:
aa3
nom:
7820
rdg:
7804
diff:
aa4
nom:
7850
rdg:
7834
diff:
ab1
nom:
7870
rdg:
7854
diff:
ab2
nom:
7825
rdg:
7814
diff:
ab3
nom:
7795
rdg:
7783
diff:
ab4
nom:
7825
rdg:
7811
diff:
nom:
7855.63
rdg:
diff:

Averages of group BM1

Formula of calculation:

sum(bb1,bb2,bb3,bb4,bc1,bc2,bc3,bc4) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
bb1
nom:
7840
rdg:
7832
diff:
bb2
nom:
7790
rdg:
7783
diff:
bb3
nom:
7765
rdg:
7756
diff:
bb4
nom:
7795
rdg:
7788
diff:
bc1
nom:
7955
rdg:
7947
diff:
bc2
nom:
7910
rdg:
7904
diff:
bc3
nom:
7885
rdg:
7873
diff:
bc4
nom:
7905
rdg:
7892
diff:
nom:
7725.00
rdg:
diff:

Averages of group AM2

Formula of calculation:

sum(aa5,aa6,aa7,aa8,ab5,ab6,ab7,ab8) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
aa5
nom:
7790
rdg:
7775
diff:
aa6
nom:
7745
rdg:
7730
diff:
aa7
nom:
7695
rdg:
7679
diff:
aa8
nom:
7710
rdg:
7693
diff:
ab5
nom:
7770
rdg:
7753
diff:
ab6
nom:
7725
rdg:
7710
diff:
ab7
nom:
7670
rdg:
7655
diff:
ab8
nom:
7695
rdg:
7678
diff:
nom:
7735.00
rdg:
diff:

Averages of group BM2

Formula of calculation:

sum(bb5,bb6,bb7,bb8,bc5,bc6,bc7,bc8) / 8

Statistics of "19"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
bb5
nom:
7740
rdg:
7728
diff:
bb6
nom:
7690
rdg:
7680
diff:
bb7
nom:
7640
rdg:
7633
diff:
bb8
nom:
7660
rdg:
7653
diff:
bc5
nom:
7850
rdg:
7841
diff:
bc6
nom:
7805
rdg:
7801
diff:
bc7
nom:
7745
rdg:
7735
diff:
bc8
nom:
7750
rdg:
7739
diff:
nom:
7512.08
rdg:
diff:

Averages of group AM3

Formula of calculation:

sum(aa9,aa10,af11,af12,af13,af14,ab9,ab10,aa11,aa12,aa13,aa14) / 12

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
aa9
nom:
7630
rdg:
7624
diff:
aa10
nom:
7580
rdg:
7575
diff:
af11
nom:
7555
rdg:
7555
diff:
af12
nom:
7545
rdg:
7545
diff:
af13
nom:
7480
rdg:
7481
diff:
af14
nom:
7475
rdg:
7475
diff:
ab9
nom:
7605
rdg:
7599
diff:
ab10
nom:
7560
rdg:
7557
diff:
aa11
nom:
7465
rdg:
7461
diff:
aa12
nom:
7445
rdg:
7441
diff:
aa13
nom:
7400
rdg:
7396
diff:
aa14
nom:
7405
rdg:
7401
diff:
nom:
7502.08
rdg:
diff:

Averages of group BM3

Formula of calculation:

sum(bb9,bb10,bb11,bb12,bb13,bb14,bc9,bc10,bc11,bc12,bc13,bc14) / 12

Statistics of "14"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
bb9
nom:
7610
rdg:
7608
diff:
bb10
nom:
7570
rdg:
7567
diff:
bb11
nom:
7435
rdg:
7431
diff:
bb12
nom:
7410
rdg:
7408
diff:
bb13
nom:
7365
rdg:
7363
diff:
bb14
nom:
7350
rdg:
7350
diff:
bc9
nom:
7700
rdg:
7697
diff:
bc10
nom:
7660
rdg:
7661
diff:
bc11
nom:
7535
rdg:
7535
diff:
bc12
nom:
7510
rdg:
7507
diff:
bc13
nom:
7445
rdg:
7445
diff:
bc14
nom:
7435
rdg:
7433
diff:
nom:
7153.33
rdg:
diff:

Averages of group ST1

Formula of calculation:

sum(aa15,aa16,aa17,bb15,bb16,bb17) / 6

Statistics of "04"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.
aa15
nom:
7190
rdg:
7178
diff:
aa16
nom:
7140
rdg:
7132
diff:
aa17
nom:
7090
rdg:
7082
diff:
bb15
nom:
7200
rdg:
7192
diff:
bb16
nom:
7180
rdg:
7171
diff:
bb17
nom:
7120
rdg:
7112
diff:
 Help
AoI The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.
ref The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:
groups and rows Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points Clicking the white area beneath the suspension point name
nom The nominal length between suspension point and main riser loop.
rdg The actual reading from your measurement device. When measuring, rdg is the input field.
diff The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.
colors Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.
status Color coded dots are shown for manual, imported & laser values
Also take a look at the Manual

Continue trimming procedure

inject html