Result

^{2024-08-15 09:50 UTC

2024-08-15 09:49 UTC
…}

Supair Leaf 2 Light ML (2019)

General Information

Manufacturer	Supair SAS
Model	Leaf 2 Light
Year	2019
Size	ML
Production date	2021-06
Line chart	Open
Total airtime	21h
Line set airtime	21h
Tolerance	+/- 10mm (Review)

Data integrity & access	Checksum valid

Settings

Manufacturer tolerance

Correction value

The deviation of the measured values from the nominal values is between 0 and -15mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

AR1

BR1

CR1

AR2

BR2

CR1

AR3

BR3

CR2

Stab main

sta

stb

stc

AR1

BR1

CR1

AR2

BR2

CR1

AR3

BR3

CR2

Stab main

sta

stb

stc

Offsets relative to median diff (1)

AR1

BR1

CR1

AR2

BR2

CR1

AR3

BR3

CR2

Stab main

AR1

BR1

CR1

AR2

BR2

CR1

AR3

BR3

CR2

Stab main

Left riser

AR1

nom:

7560.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR1

Formula of calculation:

sum(a1,a2) / 2

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7577

rdg:

7580

diff:

nom:

7543

rdg:

7547

diff:

BR1

nom:

7467.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR1

Formula of calculation:

sum(b1,b2) / 2

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7485

rdg:

7493

diff:

nom:

7449

rdg:

7450

diff:

CR1

nom:

7670.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CR1

Formula of calculation:

sum(c1,c2,d1,d2) / 4

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7689

rdg:

7696

diff:

nom:

7551

rdg:

7553

diff:

nom:

7791

rdg:

7793

diff:

nom:

7649

rdg:

7652

diff:

AR2

nom:

7447.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR2

Formula of calculation:

sum(a3,a4) / 2

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7482

rdg:

7486

diff:

nom:

7412

rdg:

7418

diff:

BR2

nom:

7362.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR2

Formula of calculation:

sum(b3,b4) / 2

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7394

rdg:

7399

diff:

nom:

7330

rdg:

7336

diff:

CR1

nom:

7564.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CR1

Formula of calculation:

sum(c3,c4,d3,d4) / 4

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7499

rdg:

7507

diff:

nom:

7534

rdg:

7538

diff:

nom:

7602

rdg:

7606

diff:

nom:

7624

rdg:

7625

diff:

AR3

nom:

7211.33

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR3

Formula of calculation:

sum(a5,a6,a7) / 3

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7342

rdg:

7339

diff:

nom:

7171

rdg:

7168

diff:

nom:

7121

rdg:

7115

diff:

BR3

nom:

7145.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR3

Formula of calculation:

sum(b5,b6,b7) / 3

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7255

rdg:

7256

diff:

nom:

7103

rdg:

7105

diff:

nom:

7077

rdg:

7080

diff:

CR2

nom:

7172.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CR2

Formula of calculation:

sum(c5,c6,c7) / 3

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7289

rdg:

7286

diff:

nom:

7134

rdg:

7132

diff:

nom:

7095

rdg:

7090

diff:

Stab main

nom:

6653.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group Stab main

Formula of calculation:

sum(a8,sta,b8,stb,c8,stc) / 6

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6705

rdg:

6692

diff:

sta

nom:

6561

rdg:

6550

diff:

nom:

6674

rdg:

6661

diff:

stb

nom:

6584

rdg:

6572

diff:

nom:

6737

rdg:

6726

diff:

stc

nom:

6661

rdg:

6650

diff:

Right riser

AR1

nom:

7560.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR1

Formula of calculation:

sum(a1,a2) / 2

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7577

rdg:

7579

diff:

nom:

7543

rdg:

7548

diff:

BR1

nom:

7467.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR1

Formula of calculation:

sum(b1,b2) / 2

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7485

rdg:

7492

diff:

nom:

7449

rdg:

7457

diff:

CR1

nom:

7670.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CR1

Formula of calculation:

sum(c1,c2,d1,d2) / 4

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7689

rdg:

7690

diff:

nom:

7551

rdg:

7558

diff:

nom:

7791

rdg:

7795

diff:

nom:

7649

rdg:

7653

diff:

AR2

nom:

7447.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR2

Formula of calculation:

sum(a3,a4) / 2

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7482

rdg:

7483

diff:

nom:

7412

rdg:

7417

diff:

BR2

nom:

7362.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR2

Formula of calculation:

sum(b3,b4) / 2

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7394

rdg:

7403

diff:

nom:

7330

rdg:

7336

diff:

CR1

nom:

7564.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CR1

Formula of calculation:

sum(c3,c4,d3,d4) / 4

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7499

rdg:

7504

diff:

nom:

7534

rdg:

7536

diff:

nom:

7602

rdg:

7604

diff:

nom:

7624

rdg:

7624

diff:

AR3

nom:

7211.33

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR3

Formula of calculation:

sum(a5,a6,a7) / 3

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7342

rdg:

7342

diff:

nom:

7171

rdg:

7172

diff:

nom:

7121

rdg:

7120

diff:

BR3

nom:

7145.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR3

Formula of calculation:

sum(b5,b6,b7) / 3

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7255

rdg:

7256

diff:

nom:

7103

rdg:

7106

diff:

nom:

7077

rdg:

7076

diff:

CR2

nom:

7172.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group CR2

Formula of calculation:

sum(c5,c6,c7) / 3

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7289

rdg:

7286

diff:

nom:

7134

rdg:

7132

diff:

nom:

7095

rdg:

7089

diff:

Stab main

nom:

6653.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group Stab main

Formula of calculation:

sum(a8,sta,b8,stb,c8,stc) / 6

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6705

rdg:

6692

diff:

sta

nom:

6561

rdg:

6551

diff:

nom:

6674

rdg:

6659

diff:

stb

nom:

6584

rdg:

6575

diff:

nom:

6737

rdg:

6724

diff:

stc

nom:

6661

rdg:

6650

diff:

Help

AoI

The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.

ref

The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:

groups and rows	Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points	Clicking the white area beneath the suspension point name

nom

The nominal length between suspension point and main riser loop.

rdg

The actual reading from your measurement device. When measuring, rdg is the input field.

diff

The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.

colors

Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.

status

Color coded dots are shown for manual, imported & laser values

Also take a look at the Manual

Continue trimming procedure

inject html