Result

^{…
2026-03-13 16:52 UTC

2026-03-12 14:06 UTC

2025-12-22 10:59 UTC
…}

Ozone Alpina 5 L (2025)

General Information

Manufacturer	Ozone Paragliders LTD
Model	Alpina 5
Year	2025
Size	L
Production date	2025-10
Line chart	Open
Total airtime	26h
Line set airtime	26h
Tolerance	+/- 10mm (Review)

Data integrity & access	Checksum valid

Settings

Manufacturer tolerance

Correction value

The deviation of the measured values from the nominal values is between 0 and -17mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

AR1

A1a

A2a

A3a

A4a

A1b

A2b

A3b

A4b

BR1

AR2

A5a

A6a

A7a

A8a

A5b

A6b

A7b

A8b

BR2

B10

B11

B12

C10

C11

C12

ARL3

A10

A11

A12

A13

A14

A15

B17

B18

B19

BRL3

B13

B14

B15

B16

AR1

A1a

A2a

A3a

A4a

A1b

A2b

A3b

A4b

BR1

AR2

A5a

A6a

A7a

A8a

A5b

A6b

A7b

A8b

BR2

B10

B11

B12

C10

C11

C12

ARL3

A10

A11

A12

A13

A14

A15

B17

B18

B19

BRL3

B13

B14

B15

B16

Offsets relative to median diff (-10)

AR1

BR1

AR2

BR2

ARL3

BRL3

AR1

BR1

AR2

BR2

ARL3

BRL3

Left riser

AR1

nom:

7462.38

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR1

Formula of calculation:

sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A1a

nom:

7542

rdg:

7531

diff:

A2a

nom:

7465

rdg:

7456

diff:

A3a

nom:

7423

rdg:

7415

diff:

A4a

nom:

7447

rdg:

7438

diff:

A1b

nom:

7528

rdg:

7513

diff:

A2b

nom:

7449

rdg:

7439

diff:

A3b

nom:

7409

rdg:

7398

diff:

A4b

nom:

7436

rdg:

7424

diff:

BR1

nom:

7481.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4,B5,B6,C1,C2,C3,C4,C5,C6) / 12

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7508

rdg:

7493

diff:

nom:

7432

rdg:

7419

diff:

nom:

7419

rdg:

7409

diff:

nom:

7385

rdg:

7372

diff:

nom:

7406

rdg:

7389

diff:

nom:

7431

rdg:

7418

diff:

nom:

7612

rdg:

7603

diff:

nom:

7538

rdg:

7528

diff:

nom:

7525

rdg:

7518

diff:

nom:

7489

rdg:

7480

diff:

nom:

7503

rdg:

7493

diff:

nom:

7527

rdg:

7515

diff:

AR2

nom:

7248.63

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR2

Formula of calculation:

sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A5a

nom:

7365

rdg:

7370

diff:

A6a

nom:

7266

rdg:

7271

diff:

A7a

nom:

7188

rdg:

7190

diff:

A8a

nom:

7192

rdg:

7196

diff:

A5b

nom:

7354

rdg:

7356

diff:

A6b

nom:

7256

rdg:

7256

diff:

A7b

nom:

7180

rdg:

7183

diff:

A8b

nom:

7188

rdg:

7189

diff:

BR2

nom:

7253.17

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR2

Formula of calculation:

sum(B7,B8,B9,B10,B11,B12,C7,C8,C9,C10,C11,C12) / 12

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7356

rdg:

7349

diff:

nom:

7250

rdg:

7246

diff:

nom:

7226

rdg:

7219

diff:

B10

nom:

7156

rdg:

7146

diff:

B11

nom:

7137

rdg:

7128

diff:

B12

nom:

7149

rdg:

7141

diff:

nom:

7451

rdg:

7451

diff:

nom:

7341

rdg:

7345

diff:

nom:

7314

rdg:

7317

diff:

C10

nom:

7236

rdg:

7236

diff:

C11

nom:

7215

rdg:

7213

diff:

C12

nom:

7207

rdg:

7204

diff:

ARL3

nom:

6912.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group ARL3

Formula of calculation:

sum(A9,A10,A11,A12) / 4

ARL3 contains suspension points that are excluded from the average:

A13,A14,A15,B17,B18,B19

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7026

rdg:

7014

diff:

A10

nom:

6930

rdg:

6922

diff:

A11

nom:

6859

rdg:

6853

diff:

A12

nom:

6835

rdg:

6829

diff:

A13

nom:

6761

rdg:

6750

diff:

A14

nom:

6734

rdg:

6723

diff:

A15

nom:

6760

rdg:

6749

diff:

B17

nom:

6774

rdg:

6762

diff:

B18

nom:

6780

rdg:

6772

diff:

B19

nom:

6790

rdg:

6778

diff:

BRL3

nom:

6919.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BRL3

Formula of calculation:

sum(B13,B14,B15,B16) / 4

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

B13

nom:

7020

rdg:

7004

diff:

B14

nom:

6926

rdg:

6912

diff:

B15

nom:

6873

rdg:

6859

diff:

B16

nom:

6858

rdg:

6844

diff:

Right riser

AR1

nom:

7462.38

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR1

Formula of calculation:

sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A1a

nom:

7542

rdg:

7536

diff:

A2a

nom:

7465

rdg:

7458

diff:

A3a

nom:

7423

rdg:

7412

diff:

A4a

nom:

7447

rdg:

7437

diff:

A1b

nom:

7528

rdg:

7519

diff:

A2b

nom:

7449

rdg:

7438

diff:

A3b

nom:

7409

rdg:

7396

diff:

A4b

nom:

7436

rdg:

7424

diff:

BR1

nom:

7481.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4,B5,B6,C1,C2,C3,C4,C5,C6) / 12

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7508

rdg:

7495

diff:

nom:

7432

rdg:

7422

diff:

nom:

7419

rdg:

7408

diff:

nom:

7385

rdg:

7375

diff:

nom:

7406

rdg:

7393

diff:

nom:

7431

rdg:

7418

diff:

nom:

7612

rdg:

7602

diff:

nom:

7538

rdg:

7527

diff:

nom:

7525

rdg:

7513

diff:

nom:

7489

rdg:

7477

diff:

nom:

7503

rdg:

7494

diff:

nom:

7527

rdg:

7516

diff:

AR2

nom:

7248.63

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR2

Formula of calculation:

sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A5a

nom:

7365

rdg:

7367

diff:

A6a

nom:

7266

rdg:

7265

diff:

A7a

nom:

7188

rdg:

7187

diff:

A8a

nom:

7192

rdg:

7190

diff:

A5b

nom:

7354

rdg:

7355

diff:

A6b

nom:

7256

rdg:

7254

diff:

A7b

nom:

7180

rdg:

7179

diff:

A8b

nom:

7188

rdg:

7183

diff:

BR2

nom:

7253.17

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR2

Formula of calculation:

sum(B7,B8,B9,B10,B11,B12,C7,C8,C9,C10,C11,C12) / 12

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7356

rdg:

7340

diff:

nom:

7250

rdg:

7239

diff:

nom:

7226

rdg:

7214

diff:

B10

nom:

7156

rdg:

7142

diff:

B11

nom:

7137

rdg:

7127

diff:

B12

nom:

7149

rdg:

7134

diff:

nom:

7451

rdg:

7443

diff:

nom:

7341

rdg:

7334

diff:

nom:

7314

rdg:

7308

diff:

C10

nom:

7236

rdg:

7230

diff:

C11

nom:

7215

rdg:

7210

diff:

C12

nom:

7207

rdg:

7200

diff:

ARL3

nom:

6912.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group ARL3

Formula of calculation:

sum(A9,A10,A11,A12) / 4

ARL3 contains suspension points that are excluded from the average:

A13,A14,A15,B17,B18,B19

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7026

rdg:

7010

diff:

A10

nom:

6930

rdg:

6918

diff:

A11

nom:

6859

rdg:

6851

diff:

A12

nom:

6835

rdg:

6826

diff:

A13

nom:

6761

rdg:

6751

diff:

A14

nom:

6734

rdg:

6721

diff:

A15

nom:

6760

rdg:

6747

diff:

B17

nom:

6774

rdg:

6759

diff:

B18

nom:

6780

rdg:

6764

diff:

B19

nom:

6790

rdg:

6778

diff:

BRL3

nom:

6919.25

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BRL3

Formula of calculation:

sum(B13,B14,B15,B16) / 4

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

B13

nom:

7020

rdg:

7004

diff:

B14

nom:

6926

rdg:

6916

diff:

B15

nom:

6873

rdg:

6859

diff:

B16

nom:

6858

rdg:

6844

diff:

Help

AoI

The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.

ref

The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:

groups and rows	Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points	Clicking the white area beneath the suspension point name

nom

The nominal length between suspension point and main riser loop.

rdg

The actual reading from your measurement device. When measuring, rdg is the input field.

diff

The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.

colors

Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.

status

Color coded dots are shown for manual, imported & laser values

Also take a look at the Manual

Continue trimming procedure

inject html