Help
AoI The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.
ref The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:
groups and rows Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points Clicking the white area beneath the suspension point name
nom The nominal length between suspension point and main riser loop.
rdg The actual reading from your measurement device. When measuring, rdg is the input field.
diff The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.
colors Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.
status Color coded dots are shown for manual, imported & laser values
Also take a look at the Manual

Result

2026-05-17 13:20 UTC

Ozone Photon ML (2023)

General Information
ManufacturerOzone Paragliders LTD
ModelPhoton
Year2023
SizeML
Production date2026-01
Line chartOpen
Total airtime30h
Line set airtime30h
Tolerance +/- 10mm (Review)
Data integrity & access
  • Contains manual values

Settings

The deviation of the measured values from the nominal values is between 0 and 25mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

AR1

A1a
A2a
A3a
A4a
A1b
A2b
A3b
A4b

BR1

B1
B2
B3
B4
C1
C2
C3
C4

AR2

A5a
A6a
A7a
A8a
A5b
A6b
A7b
A8b

BR2

B5
B6
B7
B8
C5
C6
C7
C8

AR3

A9
A10
A11
A12
A13
B12
B13

BR3

B9
B10
B11

AR1

A1a
A2a
A3a
A4a
A1b
A2b
A3b
A4b

BR1

B1
B2
B3
B4
C1
C2
C3
C4

AR2

A5a
A6a
A7a
A8a
A5b
A6b
A7b
A8b

BR2

B5
B6
B7
B8
C5
C6
C7
C8

AR3

A9
A10
A11
A12
A13
B12
B13

BR3

B9
B10
B11
Offsets relative to median diff (17)
AR1
BR1
AR2
BR2
AR3
BR3
AR1
BR1
AR2
BR2
AR3
BR3

Left riser

nom:
7418.50
rdg:
diff:

Averages of group AR1

Formula of calculation:

sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

Statistics of "edelrid-800X-360-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
289 11 1.88 31/100 high
78 16 1.77 34/100 high
 
From
To Count Median Spread Quality Evidence
83 6 1.56 32/100 high
7 13 2.49 28/100 medium
 
From
To Count Median Spread Quality Evidence
8 6 3.6 27/100 medium
 
A1a
nom:
7515
rdg:
7528
diff:
A2a
nom:
7410
rdg:
7427
diff:
A3a
nom:
7373
rdg:
7387
diff:
A4a
nom:
7406
rdg:
7423
diff:
A1b
nom:
7499
rdg:
7512
diff:
A2b
nom:
7394
rdg:
7412
diff:
A3b
nom:
7358
rdg:
7376
diff:
A4b
nom:
7393
rdg:
7404
diff:
nom:
7431.00
rdg:
diff:

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4,C1,C2,C3,C4) / 8

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
175 10 1.82 31/100 high
34 13 1.65 32/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
B1
nom:
7472
rdg:
7489
diff:
B2
nom:
7372
rdg:
7386
diff:
B3
nom:
7334
rdg:
7348
diff:
B4
nom:
7365
rdg:
7382
diff:
C1
nom:
7564
rdg:
7586
diff:
C2
nom:
7466
rdg:
7486
diff:
C3
nom:
7427
rdg:
7445
diff:
C4
nom:
7448
rdg:
7465
diff:
nom:
7181.38
rdg:
diff:

Averages of group AR2

Formula of calculation:

sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

Statistics of "edelrid-800X-360-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
289 11 1.88 31/100 high
78 16 1.77 34/100 high
 
From
To Count Median Spread Quality Evidence
83 6 1.56 32/100 high
7 13 2.49 28/100 medium
 
From
To Count Median Spread Quality Evidence
8 6 3.6 27/100 medium
 
A5a
nom:
7324
rdg:
7347
diff:
A6a
nom:
7184
rdg:
7203
diff:
A7a
nom:
7112
rdg:
7130
diff:
A8a
nom:
7123
rdg:
7140
diff:
A5b
nom:
7313
rdg:
7338
diff:
A6b
nom:
7173
rdg:
7194
diff:
A7b
nom:
7104
rdg:
7122
diff:
A8b
nom:
7118
rdg:
7132
diff:
nom:
7178.63
rdg:
diff:

Averages of group BR2

Formula of calculation:

sum(B5,B6,B7,B8,C5,C6,C7,C8) / 8

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
175 10 1.82 31/100 high
34 13 1.65 32/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
B5
nom:
7281
rdg:
7306
diff:
B6
nom:
7145
rdg:
7170
diff:
B7
nom:
7071
rdg:
7092
diff:
B8
nom:
7076
rdg:
7095
diff:
C5
nom:
7364
rdg:
7384
diff:
C6
nom:
7222
rdg:
7247
diff:
C7
nom:
7141
rdg:
7164
diff:
C8
nom:
7129
rdg:
7147
diff:
nom:
6831.00
rdg:
diff:

Averages of group AR3

Formula of calculation:

sum(A9,A10,A11) / 3

AR3 contains suspension points that are excluded from the average:

A12,A13,B12,B13

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
175 10 1.82 31/100 high
34 13 1.65 32/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
A9
nom:
6939
rdg:
6948
diff:
A10
nom:
6811
rdg:
6823
diff:
A11
nom:
6743
rdg:
6749
diff:
A12
nom:
6662
rdg:
6671
diff:
A13
nom:
6655
rdg:
6664
diff:
 
 
 
B12
nom:
6683
rdg:
6689
diff:
B13
nom:
6682
rdg:
6688
diff:
nom:
6837.33
rdg:
diff:

Averages of group BR3

Formula of calculation:

sum(B9,B10,B11) / 3

Statistics of "liros-dsl-140/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
143 9 2.33 37/100 high
22 13 2.35 36/100 high
 
From
To Count Median Spread Quality Evidence
25 4 1.87 36/100 high
5 15 2.1 72/100 high
 
From
To Count Median Spread Quality Evidence
3 10 1.35 34/100 medium
 
From
To Count Median Spread Quality Evidence
 
B9
nom:
6927
rdg:
6930
diff:
B10
nom:
6817
rdg:
6828
diff:
B11
nom:
6768
rdg:
6776
diff:

Right riser

nom:
7418.50
rdg:
diff:

Averages of group AR1

Formula of calculation:

sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

Statistics of "edelrid-800X-360-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
289 11 1.88 31/100 high
78 16 1.77 34/100 high
 
From
To Count Median Spread Quality Evidence
83 6 1.56 32/100 high
7 13 2.49 28/100 medium
 
From
To Count Median Spread Quality Evidence
8 6 3.6 27/100 medium
 
A1a
nom:
7515
rdg:
7526
diff:
A2a
nom:
7410
rdg:
7426
diff:
A3a
nom:
7373
rdg:
7389
diff:
A4a
nom:
7406
rdg:
7423
diff:
A1b
nom:
7499
rdg:
7514
diff:
A2b
nom:
7394
rdg:
7413
diff:
A3b
nom:
7358
rdg:
7378
diff:
A4b
nom:
7393
rdg:
7407
diff:
nom:
7431.00
rdg:
diff:

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4,C1,C2,C3,C4) / 8

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
175 10 1.82 31/100 high
34 13 1.65 32/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
B1
nom:
7472
rdg:
7492
diff:
B2
nom:
7372
rdg:
7390
diff:
B3
nom:
7334
rdg:
7353
diff:
B4
nom:
7365
rdg:
7385
diff:
C1
nom:
7564
rdg:
7584
diff:
C2
nom:
7466
rdg:
7487
diff:
C3
nom:
7427
rdg:
7447
diff:
C4
nom:
7448
rdg:
7467
diff:
nom:
7181.38
rdg:
diff:

Averages of group AR2

Formula of calculation:

sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

Statistics of "edelrid-800X-360-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
289 11 1.88 31/100 high
78 16 1.77 34/100 high
 
From
To Count Median Spread Quality Evidence
83 6 1.56 32/100 high
7 13 2.49 28/100 medium
 
From
To Count Median Spread Quality Evidence
8 6 3.6 27/100 medium
 
A5a
nom:
7324
rdg:
7346
diff:
A6a
nom:
7184
rdg:
7202
diff:
A7a
nom:
7112
rdg:
7129
diff:
A8a
nom:
7123
rdg:
7138
diff:
A5b
nom:
7313
rdg:
7338
diff:
A6b
nom:
7173
rdg:
7193
diff:
A7b
nom:
7104
rdg:
7124
diff:
A8b
nom:
7118
rdg:
7133
diff:
nom:
7178.63
rdg:
diff:

Averages of group BR2

Formula of calculation:

sum(B5,B6,B7,B8,C5,C6,C7,C8) / 8

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
175 10 1.82 31/100 high
34 13 1.65 32/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
B5
nom:
7281
rdg:
7296
diff:
B6
nom:
7145
rdg:
7166
diff:
B7
nom:
7071
rdg:
7088
diff:
B8
nom:
7076
rdg:
7095
diff:
C5
nom:
7364
rdg:
7381
diff:
C6
nom:
7222
rdg:
7243
diff:
C7
nom:
7141
rdg:
7159
diff:
C8
nom:
7129
rdg:
7146
diff:
nom:
6831.00
rdg:
diff:

Averages of group AR3

Formula of calculation:

sum(A9,A10,A11) / 3

AR3 contains suspension points that are excluded from the average:

A12,A13,B12,B13

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "edelrid-800X-135-sleeved/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
175 10 1.82 31/100 high
34 13 1.65 32/100 high
4 22 1.17 50/100 high
 
From
To Count Median Spread Quality Evidence
90 4 1.4 35/100 high
12 13 1.57 45/100 high
5 19 4.99 46/100 medium
 
From
To Count Median Spread Quality Evidence
15 9 2.48 41/100 high
3 14 4.41 77/100 high
 
From
To Count Median Spread Quality Evidence
 
From
To Count Median Spread Quality Evidence
 
A9
nom:
6939
rdg:
6944
diff:
A10
nom:
6811
rdg:
6821
diff:
A11
nom:
6743
rdg:
6745
diff:
A12
nom:
6662
rdg:
6671
diff:
A13
nom:
6655
rdg:
6662
diff:
 
 
 
B12
nom:
6683
rdg:
6689
diff:
B13
nom:
6682
rdg:
6688
diff:
nom:
6837.33
rdg:
diff:

Averages of group BR3

Formula of calculation:

sum(B9,B10,B11) / 3

Statistics of "liros-dsl-140/4mm"

Evidence must be high for the system to show colored dots at all.

Evidence levels
  • Low: 3 datasets found and quality is below 18
  • Medium: 3 datasets found and quality higher than 17
  • High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes
  • Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
  • Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
  • Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

From
To Count Median Spread Quality Evidence
143 9 2.33 37/100 high
22 13 2.35 36/100 high
 
From
To Count Median Spread Quality Evidence
25 4 1.87 36/100 high
5 15 2.1 72/100 high
 
From
To Count Median Spread Quality Evidence
3 10 1.35 34/100 medium
 
From
To Count Median Spread Quality Evidence
 
B9
nom:
6927
rdg:
6935
diff:
B10
nom:
6817
rdg:
6822
diff:
B11
nom:
6768
rdg:
6768
diff:

Continue trimming procedure

inject html