Result

^{…
2025-02-16 18:22 UTC

2025-02-16 17:58 UTC

2025-02-16 17:44 UTC
…}

Ozone Zeolite 2 GT S (2023)

General Information

Manufacturer	Ozone Paragliders LTD
Model	Zeolite 2 GT
Year	2023
Size	S
Production date	2023-11
Line chart	Open
Total airtime	50h
Line set airtime	n/a
Tolerance	+/- 10mm (Review)

Data integrity & access	Checksum valid

Settings

Manufacturer tolerance

Correction value

The deviation of the measured values from the nominal values is between -16 and -41mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

AR1

A1a

A2a

A3a

A4a

A1b

A2b

A3b

A4b

BR1

AR2

A5a

A6a

A7a

A8a

A5b

A6b

A7b

A8b

BR2

AR3

A10

A11

A12

A13

B12

B13

BR3

B10

B11

AR1

A1a

A2a

A3a

A4a

A1b

A2b

A3b

A4b

BR1

AR2

A5a

A6a

A7a

A8a

A5b

A6b

A7b

A8b

BR2

AR3

A10

A11

A12

A13

B12

B13

BR3

B10

B11

Offsets relative to median diff (-29)

AR1

BR1

AR2

BR2

AR3

BR3

AR1

BR1

AR2

BR2

AR3

BR3

Left riser

AR1

nom:

7046.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR1

Formula of calculation:

sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A1a

nom:

7136

rdg:

7108

diff:

A2a

nom:

7036

rdg:

7003

diff:

A3a

nom:

7002

rdg:

6969

diff:

A4a

nom:

7034

rdg:

7005

diff:

A1b

nom:

7124

rdg:

7097

diff:

A2b

nom:

7023

rdg:

6991

diff:

A3b

nom:

6990

rdg:

6957

diff:

A4b

nom:

7023

rdg:

6993

diff:

BR1

nom:

7040.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4,C1,C2,C3,C4) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7090

rdg:

7063

diff:

nom:

6989

rdg:

6960

diff:

nom:

6955

rdg:

6935

diff:

nom:

6986

rdg:

6960

diff:

nom:

7161

rdg:

7135

diff:

nom:

7064

rdg:

7039

diff:

nom:

7028

rdg:

7008

diff:

nom:

7053

rdg:

7029

diff:

AR2

nom:

6816.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR2

Formula of calculation:

sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A5a

nom:

6950

rdg:

6913

diff:

A6a

nom:

6816

rdg:

6775

diff:

A7a

nom:

6749

rdg:

6710

diff:

A8a

nom:

6763

rdg:

6725

diff:

A5b

nom:

6941

rdg:

6905

diff:

A6b

nom:

6807

rdg:

6768

diff:

A7b

nom:

6743

rdg:

6707

diff:

A8b

nom:

6759

rdg:

6721

diff:

BR2

nom:

6835.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR2

Formula of calculation:

sum(B5,B6,B7,B8,C5,C6,C7,C8) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6924

rdg:

6891

diff:

nom:

6790

rdg:

6758

diff:

nom:

6723

rdg:

6688

diff:

nom:

6736

rdg:

6700

diff:

nom:

7014

rdg:

6984

diff:

nom:

6879

rdg:

6848

diff:

nom:

6805

rdg:

6771

diff:

nom:

6813

rdg:

6779

diff:

AR3

nom:

6481.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR3

Formula of calculation:

sum(A9,A10,A11) / 3

AR3 contains suspension points that are excluded from the average:

A12,A13,B12,B13

Exclusions usually occur if suspension points are part of the stabilo but not attached to a dedicated stabilo main line. In other cases they might be excluded due to their function as stabilizer in case of a large front collapse.

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6585

rdg:

6557

diff:

A10

nom:

6463

rdg:

6437

diff:

A11

nom:

6397

rdg:

6369

diff:

A12

nom:

6307

rdg:

6291

diff:

A13

nom:

6288

rdg:

6267

diff:

B12

nom:

6327

rdg:

6309

diff:

B13

nom:

6310

rdg:

6288

diff:

BR3

nom:

6500.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR3

Formula of calculation:

sum(B9,B10,B11) / 3

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6584

rdg:

6559

diff:

B10

nom:

6482

rdg:

6456

diff:

B11

nom:

6436

rdg:

6410

diff:

Right riser

AR1

nom:

7046.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR1

Formula of calculation:

sum(A1a,A2a,A3a,A4a,A1b,A2b,A3b,A4b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A1a

nom:

7136

rdg:

7108

diff:

A2a

nom:

7036

rdg:

7003

diff:

A3a

nom:

7002

rdg:

6969

diff:

A4a

nom:

7034

rdg:

7005

diff:

A1b

nom:

7124

rdg:

7098

diff:

A2b

nom:

7023

rdg:

6991

diff:

A3b

nom:

6990

rdg:

6956

diff:

A4b

nom:

7023

rdg:

6994

diff:

BR1

nom:

7040.75

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR1

Formula of calculation:

sum(B1,B2,B3,B4,C1,C2,C3,C4) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

7090

rdg:

7069

diff:

nom:

6989

rdg:

6967

diff:

nom:

6955

rdg:

6932

diff:

nom:

6986

rdg:

6963

diff:

nom:

7161

rdg:

7142

diff:

nom:

7064

rdg:

7045

diff:

nom:

7028

rdg:

7008

diff:

nom:

7053

rdg:

7031

diff:

AR2

nom:

6816.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR2

Formula of calculation:

sum(A5a,A6a,A7a,A8a,A5b,A6b,A7b,A8b) / 8

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

A5a

nom:

6950

rdg:

6913

diff:

A6a

nom:

6816

rdg:

6776

diff:

A7a

nom:

6749

rdg:

6710

diff:

A8a

nom:

6763

rdg:

6723

diff:

A5b

nom:

6941

rdg:

6906

diff:

A6b

nom:

6807

rdg:

6768

diff:

A7b

nom:

6743

rdg:

6704

diff:

A8b

nom:

6759

rdg:

6719

diff:

BR2

nom:

6835.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR2

Formula of calculation:

sum(B5,B6,B7,B8,C5,C6,C7,C8) / 8

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6924

rdg:

6893

diff:

nom:

6790

rdg:

6759

diff:

nom:

6723

rdg:

6690

diff:

nom:

6736

rdg:

6700

diff:

nom:

7014

rdg:

6983

diff:

nom:

6879

rdg:

6846

diff:

nom:

6805

rdg:

6773

diff:

nom:

6813

rdg:

6777

diff:

AR3

nom:

6481.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group AR3

Formula of calculation:

sum(A9,A10,A11) / 3

AR3 contains suspension points that are excluded from the average:

A12,A13,B12,B13

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6585

rdg:

6557

diff:

A10

nom:

6463

rdg:

6437

diff:

A11

nom:

6397

rdg:

6371

diff:

A12

nom:

6307

rdg:

6286

diff:

A13

nom:

6288

rdg:

6264

diff:

B12

nom:

6327

rdg:

6306

diff:

B13

nom:

6310

rdg:

6285

diff:

BR3

nom:

6500.67

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group BR3

Formula of calculation:

sum(B9,B10,B11) / 3

Statistics of "52-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

nom:

6584

rdg:

6560

diff:

B10

nom:

6482

rdg:

6458

diff:

B11

nom:

6436

rdg:

6412

diff:

Help

AoI

The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.

ref

The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:

groups and rows	Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points	Clicking the white area beneath the suspension point name

nom

The nominal length between suspension point and main riser loop.

rdg

The actual reading from your measurement device. When measuring, rdg is the input field.

diff

The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.

colors

Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.

status

Color coded dots are shown for manual, imported & laser values

Also take a look at the Manual

Continue trimming procedure

inject html