Result

^{2025-07-12 18:06 UTC

2025-07-12 15:54 UTC
…}

PHI Maestro Light 19 (2020)

General Information

Manufacturer	PHI by Papesh GmbH
Model	Maestro Light
Year	2020
Size	19
Production date	2019-10
Line chart	Open
Total airtime	200h
Line set airtime	200h
Tolerance	+/- 10mm (Review)

Data integrity & access	Contains manual values

Settings

Manufacturer tolerance

Correction value

The deviation of the measured values from the nominal values is between -26 and -47mm. Adjust the value according to your measuring set-up.
Put a positive value if readings are too short.
Put a negative value if readings are too long.

Wing as seen from above in flight

3A1

1A1

1A2

1A3

1A4

1A5

1A6

3B1

1B1

1B2

1B3

1B4

1B5

1B6

3C1

1C1

1C2

1C3

1C4

1C5

1C6

3A2

1A7

1A8

1A9

1A10

1A11

1A12

3B2

1B7

1B8

1B9

1B10

1B11

1B12

3C2

1C7

1C8

1C9

1C10

1C11

1C12

3StB

1A13

1StA

1B13

1StB

1StC

BR

1BR1

1BR2

1BR3

1BR4

1BR5

1BR6

1BR7

1BR8

1BR9

1BR10

1BR11

3A1

1A1

1A2

1A3

1A4

1A5

1A6

3B1

1B1

1B2

1B3

1B4

1B5

1B6

3C1

1C1

1C2

1C3

1C4

1C5

1C6

3A2

1A7

1A8

1A9

1A10

1A11

1A12

3B2

1B7

1B8

1B9

1B10

1B11

1B12

3C2

1C7

1C8

1C9

1C10

1C11

1C12

3StB

1A13

1StA

1B13

1StB

1StC

BR

1BR1

1BR2

1BR3

1BR4

1BR5

1BR6

1BR7

1BR8

1BR9

1BR10

1BR11

Offsets relative to median diff (-35)

3A1

3B1

3C1

3A2

3B2

3C2

3StB

3A1

3B1

3C1

3A2

3B2

3C2

3StB

Left riser

3A1

nom:

7120.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 3A1

Formula of calculation:

sum(1A1,1A2,1A3,1A4,1A5,1A6) / 6

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

1A1

nom:

7261

rdg:

7221

diff:

1A2

nom:

7107

rdg:

7066

diff:

1A3

nom:

7118

rdg:

7075

diff:

1A4

nom:

7080

rdg:

7034

diff:

1A5

nom:

7025

rdg:

6978

diff:

1A6

nom:

7129

rdg:

7083

diff:

3B1

nom:

7047.17

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 3B1

Formula of calculation:

sum(1B1,1B2,1B3,1B4,1B5,1B6) / 6

Statistics of "54-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

1B1

nom:

7184

rdg:

7147

diff:

1B2

nom:

7031

rdg:

6997

diff:

1B3

nom:

7044

rdg:

7007

diff:

1B4

nom:

7008

rdg:

6972

diff:

1B5

nom:

6956

rdg:

6917

diff:

1B6

nom:

7060

rdg:

7025

diff:

3C1

nom:

7148.17

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 3C1

Formula of calculation:

sum(1C1,1C2,1C3,1C4,1C5,1C6) / 6

Statistics of "54-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

1C1

nom:

7231

rdg:

7199

diff:

1C2

nom:

7204

rdg:

7173

diff:

1C3

nom:

7088

rdg:

7062

diff:

1C4

nom:

7092

rdg:

7057

diff:

1C5

nom:

7124

rdg:

7090

diff:

1C6

nom:

7150

rdg:

7115

diff:

3A2

nom:

6809.17

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 3A2

Formula of calculation:

sum(1A7,1A8,1A9,1A10,1A11,1A12) / 6

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

1A7

nom:

6987

rdg:

6954

diff:

1A8

nom:

6876

rdg:

6845

diff:

1A9

nom:

6888

rdg:

6859

diff:

1A10

nom:

6753

rdg:

6721

diff:

1A11

nom:

6673

rdg:

6642

diff:

1A12

nom:

6678

rdg:

6642

diff:

3B2

nom:

6760.17

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 3B2

Formula of calculation:

sum(1B7,1B8,1B9,1B10,1B11,1B12) / 6

Statistics of "54-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

1B7

nom:

6926

rdg:

6893

diff:

1B8

nom:

6821

rdg:

6791

diff:

1B9

nom:

6835

rdg:

6802

diff:

1B10

nom:

6706

rdg:

6671

diff:

1B11

nom:

6636

rdg:

6601

diff:

1B12

nom:

6637

rdg:

6592

diff:

3C2

nom:

6830.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 3C2

Formula of calculation:

sum(1C7,1C8,1C9,1C10,1C11,1C12) / 6

Statistics of "54-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

1C7

nom:

6998

rdg:

6964

diff:

1C8

nom:

6950

rdg:

6919

diff:

1C9

nom:

6894

rdg:

6864

diff:

1C10

nom:

6750

rdg:

6716

diff:

1C11

nom:

6717

rdg:

6681

diff:

1C12

nom:

6674

rdg:

6643

diff:

3StB

nom:

6348.60

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 3StB

Formula of calculation:

sum(1A13,1StA,1B13,1StB,1StC) / 5

Statistics of "54-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

1A13

nom:

6361

rdg:

6326

diff:

1StA

nom:

6242

rdg:

6206

diff:

1B13

nom:

6380

rdg:

6345

diff:

1StB

nom:

6327

rdg:

6289

diff:

1StC

nom:

6433

rdg:

6399

diff:

Left brake

nom:

6822.45

rdg:

diff:

Re-measure

Comment

Averages of group BR

Formula of calculation:

sum(1BR1,1BR2,1BR3,1BR4,1BR5,1BR6,1BR7,1BR8,1BR9,1BR10,1BR11) / 11

1BR1

nom:

7336

rdg:

7301

diff:

1BR2

nom:

7054

rdg:

7017

diff:

1BR3

nom:

6982

rdg:

6945

diff:

1BR4

nom:

6935

rdg:

6906

diff:

1BR5

nom:

6981

rdg:

6946

diff:

1BR6

nom:

6848

rdg:

6809

diff:

1BR7

nom:

6726

rdg:

6690

diff:

1BR8

nom:

6609

rdg:

6575

diff:

1BR9

nom:

6549

rdg:

6514

diff:

1BR10

nom:

6528

rdg:

6490

diff:

1BR11

nom:

6499

rdg:

6461

diff:

Right riser

3A1

nom:

7120.00

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 3A1

Formula of calculation:

sum(1A1,1A2,1A3,1A4,1A5,1A6) / 6

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

1A1

nom:

7261

rdg:

7229

diff:

1A2

nom:

7107

rdg:

7069

diff:

1A3

nom:

7118

rdg:

7082

diff:

1A4

nom:

7080

rdg:

7039

diff:

1A5

nom:

7025

rdg:

6987

diff:

1A6

nom:

7129

rdg:

7093

diff:

3B1

nom:

7047.17

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 3B1

Formula of calculation:

sum(1B1,1B2,1B3,1B4,1B5,1B6) / 6

Statistics of "54-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

1B1

nom:

7184

rdg:

7143

diff:

1B2

nom:

7031

rdg:

6993

diff:

1B3

nom:

7044

rdg:

7006

diff:

1B4

nom:

7008

rdg:

6969

diff:

1B5

nom:

6956

rdg:

6917

diff:

1B6

nom:

7060

rdg:

7020

diff:

3C1

nom:

7148.17

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 3C1

Formula of calculation:

sum(1C1,1C2,1C3,1C4,1C5,1C6) / 6

Statistics of "54-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

1C1

nom:

7231

rdg:

7196

diff:

1C2

nom:

7204

rdg:

7171

diff:

1C3

nom:

7088

rdg:

7054

diff:

1C4

nom:

7092

rdg:

7053

diff:

1C5

nom:

7124

rdg:

7086

diff:

1C6

nom:

7150

rdg:

7113

diff:

3A2

nom:

6809.17

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 3A2

Formula of calculation:

sum(1A7,1A8,1A9,1A10,1A11,1A12) / 6

Statistics of "56-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

1A7

nom:

6987

rdg:

6953

diff:

1A8

nom:

6876

rdg:

6849

diff:

1A9

nom:

6888

rdg:

6859

diff:

1A10

nom:

6753

rdg:

6723

diff:

1A11

nom:

6673

rdg:

6640

diff:

1A12

nom:

6678

rdg:

6640

diff:

3B2

nom:

6760.17

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 3B2

Formula of calculation:

sum(1B7,1B8,1B9,1B10,1B11,1B12) / 6

Statistics of "54-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

1B7

nom:

6926

rdg:

6891

diff:

1B8

nom:

6821

rdg:

6791

diff:

1B9

nom:

6835

rdg:

6804

diff:

1B10

nom:

6706

rdg:

6675

diff:

1B11

nom:

6636

rdg:

6603

diff:

1B12

nom:

6637

rdg:

6600

diff:

3C2

nom:

6830.50

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 3C2

Formula of calculation:

sum(1C7,1C8,1C9,1C10,1C11,1C12) / 6

Statistics of "54-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

1C7

nom:

6998

rdg:

6962

diff:

1C8

nom:

6950

rdg:

6917

diff:

1C9

nom:

6894

rdg:

6860

diff:

1C10

nom:

6750

rdg:

6716

diff:

1C11

nom:

6717

rdg:

6679

diff:

1C12

nom:

6674

rdg:

6640

diff:

3StB

nom:

6348.60

rdg:

diff:

Cascade loop

Line insert

Re-measure

Exlclude from analysis

Comment

Averages of group 3StB

Formula of calculation:

sum(1A13,1StA,1B13,1StB,1StC) / 5

Statistics of "54-Softlink"

Evidence must be high for the system to show colored dots at all.

Evidence levels

Low: 3 datasets found and quality is below 18
Medium: 3 datasets found and quality higher than 17
High: 10 datasets found and quality is at least 25 / 3 datasets found and quality is at least 50

The color of the dot itself is based on the spread.

Color codes

Green (reliable): Spread is less than or equal to 2.0. Chances are high that you will get a very similar result.
Yellow (uncertain): Spread is less than or equal to 3.0. Your result might diverge from the expected length change.
Orange (unreliable): Spread is greater than 3.0. Given the data we have, the length change might be something but what expected.

The following table shows statistics acquired by user measurements.

1A13

nom:

6361

rdg:

6327

diff:

1StA

nom:

6242

rdg:

6204

diff:

1B13

nom:

6380

rdg:

6347

diff:

1StB

nom:

6327

rdg:

6291

diff:

1StC

nom:

6433

rdg:

6397

diff:

Right brake

nom:

6822.45

rdg:

diff:

Re-measure

Comment

Averages of group BR

Formula of calculation:

sum(1BR1,1BR2,1BR3,1BR4,1BR5,1BR6,1BR7,1BR8,1BR9,1BR10,1BR11) / 11

1BR1

nom:

7336

rdg:

7315

diff:

1BR2

nom:

7054

rdg:

7033

diff:

1BR3

nom:

6982

rdg:

6960

diff:

1BR4

nom:

6935

rdg:

6913

diff:

1BR5

nom:

6981

rdg:

6960

diff:

1BR6

nom:

6848

rdg:

6825

diff:

1BR7

nom:

6726

rdg:

6707

diff:

1BR8

nom:

6609

rdg:

6586

diff:

1BR9

nom:

6549

rdg:

6528

diff:

1BR10

nom:

6528

rdg:

6505

diff:

1BR11

nom:

6499

rdg:

6479

diff:

Help

AoI

The Angle of Incidence diff is shown in the wing view as triangle in millimeters if no ref is selected. Plus means faster. Minus means slower.

ref

The current main/row or suspension point that is set as reference to calculate relative deviations. The referenced object is marked with a border.
You can select/change the ref by:

groups and rows	Using the radio buttons () or click on the grey rows or names of the main lines in the wing at the top.
points	Clicking the white area beneath the suspension point name

nom

The nominal length between suspension point and main riser loop.

rdg

The actual reading from your measurement device. When measuring, rdg is the input field.

diff

The difference between nom and rdg. This value depends on the currently selected ref. If nothing is selected, the actual deviations from rdg to nom are displayed.

colors

Areas marked in red color are further away (the line is longer) than the selected ref. Areas marked in blue color are closer (the line is shorter) than the selected ref.

status

Color coded dots are shown for manual, imported & laser values

Also take a look at the Manual

Continue trimming procedure

inject html